Custom Query (1249 matches)
Results (73 - 75 of 1249)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #708 | fixed | Add HGST Ultrastar 7K6000 to the drivedb | ||
| Description |
http://www.hgst.com/products/hard-drives/ultrastar-7k6000 smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-327.18.2.el7.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HGST HUS726060ALE614
Firmware Version: APGNW517
User Capacity: 6,001,174,044,160 bytes [6.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Jun 23 21:26:24 2016 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 113) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 785) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S--- 136 136 054 - 108
3 Spin_Up_Time POS--- 135 135 024 - 467 (Average 504)
4 Start_Stop_Count -O--C- 100 100 000 - 27
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 128 128 020 - 18
9 Power_On_Hours -O--C- 100 100 000 - 207
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 25
192 Power-Off_Retract_Count -O--CK 100 100 000 - 44
193 Load_Cycle_Count -O--C- 100 100 000 - 44
194 Temperature_Celsius -O---- 171 171 000 - 35 (Min/Max 24/38)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x12 GPL R/O 1 SATA NCQ Queue Management log
0x15 GPL,SL - 1 Reserved for Serial ATA
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 128 Current Device Internal Status Data log
0x25 GPL R/O 128 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 207 -
# 2 Extended offline Completed without error 00% 151 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 35 Celsius
Power Cycle Min/Max Temperature: 34/37 Celsius
Lifetime Min/Max Temperature: 24/38 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (54)
Index Estimated Time Temperature Celsius
55 2016-06-23 19:19 36 *****************
... ..(100 skipped). .. *****************
28 2016-06-23 21:00 36 *****************
29 2016-06-23 21:01 35 ****************
30 2016-06-23 21:02 34 ***************
... ..( 5 skipped). .. ***************
36 2016-06-23 21:08 34 ***************
37 2016-06-23 21:09 35 ****************
... ..( 8 skipped). .. ****************
46 2016-06-23 21:18 35 ****************
47 2016-06-23 21:19 34 ***************
48 2016-06-23 21:20 35 ****************
... ..( 4 skipped). .. ****************
53 2016-06-23 21:25 35 ****************
54 2016-06-23 21:26 36 *****************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Description
1 ===== = = == General Statistics (rev 2) ==
1 0x008 4 25 Lifetime Power-On Resets
1 0x018 6 27127609759 Logical Sectors Written
1 0x020 6 126682278 Number of Write Commands
1 0x028 6 53743669032 Logical Sectors Read
1 0x030 6 213268635 Number of Read Commands
3 ===== = = == Rotating Media Statistics (rev 1) ==
3 0x008 4 187 Spindle Motor Power-on Hours
3 0x010 4 187 Head Flying Hours
3 0x018 4 44 Head Load Events
3 0x020 4 0 Number of Reallocated Logical Sectors
3 0x028 4 3267 Read Recovery Attempts
3 0x030 4 0 Number of Mechanical Start Failures
4 ===== = = == General Errors Statistics (rev 1) ==
4 0x008 4 0 Number of Reported Uncorrectable Errors
4 0x010 4 0 Resets Between Cmd Acceptance and Completion
5 ===== = = == Temperature Statistics (rev 1) ==
5 0x008 1 35 Current Temperature
5 0x010 1 35~ Average Short Term Temperature
5 0x018 1 -~ Average Long Term Temperature
5 0x020 1 38 Highest Temperature
5 0x028 1 24 Lowest Temperature
5 0x030 1 36~ Highest Average Short Term Temperature
5 0x038 1 25~ Lowest Average Short Term Temperature
5 0x040 1 -~ Highest Average Long Term Temperature
5 0x048 1 -~ Lowest Average Long Term Temperature
5 0x050 4 0 Time in Over-Temperature
5 0x058 1 60 Specified Maximum Operating Temperature
5 0x060 4 0 Time in Under-Temperature
5 0x068 1 0 Specified Minimum Operating Temperature
6 ===== = = == Transport Statistics (rev 1) ==
6 0x008 4 4 Number of Hardware Resets
6 0x010 4 40 Number of ASR Events
6 0x018 4 0 Number of Interface CRC Errors
|_ ~ normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 3877 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|||
| #1332 | fixed | Add HP OEM Intel 320 SSD to drivedb.h | ||
| Description |
HP OEM Intel 320 SSDs have an
Changing the existing
Tested with |
|||
| #253 | wontfix | Add Highpoint RocketRAID support (hptiop) | ||
| Description |
I mainly work with FreeNAS systems, but I found an issue that I think can be resolved here. I have a RocketRAID 4520 controller(latest generation from Highpoint). When I use the command smartctl -a -d hpt,1/1/1 /dev/hptiop0 I get the error "Smartctl: Device Read Identity Failed: Bad address'. It appears that this issue was previously documented in ticket:71. That ticket was closed since nobody had this controller. I have a controller from each of the 35xx, 43xx, and 45xx family of controllers. AFAIK the only way to get any SMART data and run any tests is via the Highpoint CLI available as a binary only. My guess is that all 3 families of controller mentioned above and the 44xx will all work with the same appropriate fix. I have a system that I can give SSH and FTP access to on request. I only have the 45xx until the end of the year however(on loan to help facilitate support for FreeNAS). You can read additional information on this issue provided by me at the FreeNAS ticket https://support.freenas.org/ticket/1932. I listed the priority as major since so many generations of cards are included with this ticket. |
|||
Note: See TracQuery
for help on using queries.
