Custom Query (1110 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (70 - 72 of 1110)

Ticket Resolution Summary Owner Reporter
#147 fixed smartctl logs results of old, and outdated selftest Christian Franke johnjore
Description

Test #19 failed, but since then the sector is fixed (somehow, reallocated or read successfully). Test #2 now shows success. Smartctl is ignoring the new success status, and constantly logging the failure. (which propagates up the monitoring chain)

Can smartctl be modified, as default or via an option, to use the last "Completed" instead of an old "Completed" ?

(I've snipped a number of lines from the output below:

START OF READ SMART DATA SECTION

SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime?(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 90% 22506 - # 2 Extended offline Completed without error 00% 22488 - #19 Extended offline Completed: read failure 90% 20054 824368247 #20 Extended offline Interrupted (host reset) 90% 19903 -

Regards, John Jore

#11 fixed smartctl is verbose even with the option quietmode=errorsonly Christian Franke Giuseppe Iuculano
Description

Hi,

svn r2879: smartctl is verbose even with the option quietmode=errorsonly.

+ smartctl --test=short --quietmode=errorsonly /dev/sda1 smartctl 5.39 2009-08-29 r2879 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION

Sending command: "Execute SMART Short self-test routine immediately in off-line mode". Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 1 minutes for test to complete. Test will complete after Wed Sep 9 04:37:01 2009

Use smartctl -X to abort test.

Original bug report: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=545784

#281 fixed smartctl hpt27xx controller with more than 16 devices Alex Samorukov stin9ray
Description

Limit of 16 devices seems to be hard coded.

The command to retrieve a smart dump for da16 fails: [

root@wood] ~# smartctl -d hpt,1/17/1 -x /dev/hpt27xx
smartctl 6.1 2013-03-16 r3800 [FreeBSD 9.1-STABLE amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/hpt27xx: Option '-d hpt,L/M/N' invalid channel number M supplied
=======> VALID ARGUMENTS ARE: ata, scsi, sat[,auto][,N][+TYPE], usbcypress[,X], usbjmicron[,p][,x][,N], usbsunplus, 3ware,N, hpt,L/M/N, cciss,N, areca,N/E, atacam, auto, test <=======

Use smartctl -h to get a usage summary

[root@wood] ~# smartctl -V
smartctl 6.1 2013-03-16 r3800 [FreeBSD 9.1-STABLE amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

smartctl comes with ABSOLUTELY NO WARRANTY. This is free
software, and you are welcome to redistribute it under
the terms of the GNU General Public License; either
version 2, or (at your option) any later version.
See http://www.gnu.org for further details.

smartmontools release 6.1 dated 2013-03-16 at 14:35:27 UTC
smartmontools SVN rev 3800 dated 2013-03-16 at 14:36:20
smartmontools build host: amd64-portbld-freebsd9.1
smartmontools build configured: 2013-06-14 17:22:15 UTC
smartctl compile dated Jun 14 2013 at 17:22:22
smartmontools configure arguments:  '--disable-dependency-tracking' '--enable-drivedb' '--enable-sample' '--with-initscriptdir=/usr/local/etc/rc.d' '--with-docdir=/usr/local/share/doc/smartmontools' '--prefix=/usr/local' '--mandir=/usr/local/man' '--infodir=/usr/local/info/' '--build=amd64-portbld-freebsd9.1' 'build_alias=amd64-portbld-freebsd9.1' 'CXX=c++' 'CXXFLAGS=-O -pipe -Wno-write-strings' 'LDFLAGS=' 'CPPFLAGS=' 'CC=cc' 'CFLAGS=-O -pipe -Wno-write-strings'
[root@wood] ~# uname -a
FreeBSD wood.lakeview42.com 9.1-STABLE FreeBSD 9.1-STABLE #0 r+043291a: Mon Jun 17 00:10:05 PDT 2013     root@build.ixsystems.com:/tank/build/nightlies/2013-06-17/os-base/amd64/tank/build/nightlies/2013-06-17/FreeBSD/src/sys/FREENAS.amd64  amd64
[root@wood] ~# 

Controller: High Point RocketRAID 2760A This controller is advertised as a 16 channel controller that "switches" 24 internal disks.

In my configuration here are 19 disks connected to the controller, all are detected as da0 .. da19. da0 at hpt27xx0 bus 0 scbus7 target 0 lun 0 da0: <HPT DISK 0_0 4.00> Fixed Direct Access SCSI-0 device da0: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C) [...] da19 at hpt27xx0 bus 0 scbus7 target 19 lun 0 da19: <HPT DISK 0_19 4.00> Fixed Direct Access SCSI-0 device da19: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)

The command: smartctl -d hpt,1/16/1 -x /dev/hpt27xx works as expected dumping all the smart info for da15.

Note: See TracQuery for help on using queries.