Custom Query (1357 matches)
Results (67 - 69 of 1357)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #681 | fixed | NEW DRIVE: Samsung SSD SM863 (MZ-7KM<Capacity>Z) | ||
| Description |
The Smart Attributes should be similar to the PM863 which is in the database already: smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.2.8-1-pve] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sg2 [cciss_disk_00] [SAT]: Device open changed type from 'sat,auto+cciss' to 'sat'
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG MZ7KM480HAHP-0E005
Serial Number: S2NGNXAH100675H
LU WWN Device Id: 5 002538 c401581ca
Firmware Version: GXM1003Q
User Capacity: 480,103,981,056 bytes [480 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Apr 11 11:40:25 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Disabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Unexpected SCT status 0x0000 (action_code=0, function_code=0)
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2100) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 35) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 099 099 000 - 162
12 Power_Cycle_Count -O--CK 099 099 000 - 26
177 Wear_Leveling_Count PO--C- 099 099 005 - 2
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 3854
181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
183 Runtime_Bad_Block PO--C- 100 100 010 - 0
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O--CK 067 061 000 - 33
195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
202 Unknown_SSD_Attribute PO--CK 100 100 010 - 0
235 Unknown_Attribute -O--C- 099 099 000 - 23
241 Total_LBAs_Written -O--CK 099 099 000 - 1955603343
242 Total_LBAs_Read -O--CK 099 099 000 - 5042352004
243 Unknown_Attribute -O--CK 100 100 000 - 0
244 Unknown_Attribute -O--CK 100 100 000 - 0
245 Unknown_Attribute -O--CK 100 100 000 - 65535
246 Unknown_Attribute -O--CK 100 100 000 - 65535
247 Unknown_Attribute -O--CK 100 100 000 - 65535
251 Unknown_Attribute -O--CK 100 100 000 - 2258709920
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xce SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 162 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was completed without error
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: 30/34 Celsius
Lifetime Min/Max Temperature: 0/70 Celsius
Under/Over Temperature Limit Count: 4294967295/4294967295
Unexpected SCT status 0x0000 (action_code=0, function_code=0)
Read SCT Temperature History failed
Unexpected SCT status 0x0000 (action_code=0, function_code=0)
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|||
| #684 | fixed | outdated "sending report about your drive" link target on https://www.smartmontools.org/ page | ||
| Description |
In the Contribute to Smartmontools -- Device Information paragraph of https://www.smartmontools.org/, the target of the "sending a report about your drive" link is currently https://www.smartmontools.org/wiki/FAQ#MyATAdriveisnotinthesmartctlsmartddatabase , but the desired FAQ is now actually found at https://www.smartmontools.org/wiki/FAQ#MyATASATAdriveisnotinthesmartctlsmartddatabase instead. |
|||
| #685 | fixed | "How to create bug report" FAQ mentions sourceforge account | ||
| Description |
The paragraph on creating a new Trac ticket found at https://www.smartmontools.org/wiki/FAQ#Howtocreateabugreport includes the sentence "You have to be logged in with a sourceforge account to do that." Presumably this should now say something like "You must be logged in to your smartmontools.org Trac account in order to do that." |
|||
Note:
See TracQuery
for help on using queries.
