Custom Query (1095 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (64 - 66 of 1095)

Ticket Resolution Summary Owner Reporter
#1392 fixed Patch to mark Seagate Archive HDD as SMR Christian Franke Cmdr_Zod
Description

The Seagate Archive HDD are SMR drives according to manufacturer specs: https://www.seagate.com/www-content/product-content/hdd-fam/seagate-archive-hdd/en-us/docs/archive-hdd-dS1834-3-1411us.pdf

Unfortunately, smartmontools SVN rev 5115 doesn't recognize them as zoned device, because the drive doesn't report this:

# ./smartctl -i /dev/sdb
smartctl 7.2 2020-11-09 r5115 [x86_64-linux-5.8.0-0.bpo.2-amd64] (CircleCI)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Archive HDD
Device Model:     ST8000AS0002-1NA17Z
Serial Number:    Z840X424
LU WWN Device Id: 5 000c50 0938ab626
Firmware Version: AR17
User Capacity:    8,001,563,222,016 bytes [8.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5980 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Nov 13 19:39:10 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

relevant part from "smartctl --identify=wb /dev/sdb":

  69      -     0x0000   Additional support
  69     15          0   CFast specification supported
  69     14          0   Deterministic data after trim supported
  69     13          0   LPS Alignment Error Reporting Control supported
  69     12          0   DCO IDENTIFY/SET DMA supported [OBS-ACS-3]
  69     11          0   READ BUFFER DMA supported
  69     10          0   WRITE BUFFER DMA supported
  69      9          0   SET MAX SET PASSWORD/UNLOCK DMA supported [OBS-ACS-3]
  69      8          0   DOWNLOAD MICROCODE DMA supported
  69      7          0   Reserved for IEEE 1667
  69      6          0   Optional ATA device 28-bit commands supported
  69      5          0   Trimmed LBA range(s) returning zeroed data supported
  69      4          0   Device encrypts all user data
  69      3          0   Extended number of user addressable sectors supported
  69      2          0   All write cache is non-volatile
  69      1:0      0x0   Zoned Capabilities

following small patch adds SMR the name of the model family:

--- drivedb.h.orig      2020-11-01 16:58:02.000000000 +0100
+++ drivedb.h   2020-11-13 19:35:43.609934314 +0100
@@ -4241,7 +4241,7 @@
     "-v 18,raw48,Unknown_Seagate_Attrib " // ST16000NE000
     "-v 240,msec24hour32"
   },
-  { "Seagate Archive HDD", // tested with ST8000AS0002-1NA17Z/AR13
+  { "Seagate Archive HDD (SMR)", // tested with ST8000AS0002-1NA17Z/AR13
     "ST[568]000AS00[01][12]-.*",
     "", "", ""
   },

#1294 duplicate Crucial MX500: bogus raw values in attribute 197 D.Dave
Description

Manjaro Linux, smartctl 7.1 (smartmontools 7.1-1)

Since smartmontools has been updated from 7.0 to 7.1, I see the following error/warning about the Crucial MX500 SSD (Firmware version M3CR023)

Warning This firmware returns bogus raw values in attribute 197

But this attribute, also checked in other utilities, doesn't report nothing of bad:

197,"Current Pending Sector Count","never","100","100","0","0","old age","-O--CK"

As I dowgrade to smartctl 7.0, this warning disappear.

#877 invalid Workaround for supporting SATADOM DamianW
Description

Hello Community,

I have tested smartctl command line interface with Innodisk SATADOM-ML 3ME (30 GB capacity) and I saw that there is a hang.

Problem is in file ataprint.cpp, in section: Read SMART Log directory

As a workaround I would propose to add additional input argument -d satadom, if this argument is passed, drive is treated like normal sat drive but it will not enter the "Read SMART Log directory" section

Note: See TracQuery for help on using queries.