Custom Query (1327 matches)


Show under each result:

Results (61 - 63 of 1327)

Ticket Resolution Summary Owner Reporter
#94 fixed Build fails if source was downloaded via ViewVC Christian Franke Christian Franke

ViewVC allows to download the source as a tarball. A build from the tarball fails because the SVN Id strings are not expanded.

#95 fixed JMicron 4 device support (0x152d:0x0551) Christian Franke cheetah

I've recently acquired a 4 bay USB3+eSATA enclosure, specifically this one: (Mediasonic Pro Box 4 Bay Enclosure USB 3.0 & eSATA [HF2-SU3S2] in case the link becomes dead). NB: I'm not actually using USB3 (yet), it's connected to a USB2 host.

The enclosure uses a JMicron chip that smartmontools does not support. I'm hoping that JMicron implemented this one similarly to the two device chips, and that smartmontools can support this without huge effort.

What smartctl says when I try to query it: "... Unknown USB bridge [0x152d:0x0551 (0x100)]" ... <please use -d>

On a lark, I tried the usbjmicron,0, and that appeared to successfully give the info for the first disk. So I tried usbjmicron,1 for the second device, and that I think made the enclosure "reboot": I got a usb disconnect, and then it came back to life.

#97 fixed os_freebsd.cpp: need to detect /dev/mfidx devices and display help Alex Samorukov Alex Samorukov

FreeBSD supports megaraid (and Dell) controllers with mfi driver. We don`t need to add any code to the smartmontools because mfip driver exports array drives as /dev/passX devices. But its better to add special detection of such devices and show user message like "please load mfip.ko module and run 'smartctl /dev/passX' to see smart info"

Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.