Custom Query (997 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (55 - 57 of 997)

Ticket Resolution Summary Owner Reporter
#808 fixed Add HFS250G32TND-N1A2A to database Alan Lauer
Description

Add SK hynix SSD model HFS250G32TND-N1A2A to smartctl/smartd database

#708 fixed Add HGST Ultrastar 7K6000 to the drivedb Christian Franke Norst
Description

http://www.hgst.com/products/hard-drives/ultrastar-7k6000

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-327.18.2.el7.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HUS726060ALE614
Firmware Version: APGNW517
User Capacity:    6,001,174,044,160 bytes [6.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Jun 23 21:26:24 2016 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  113) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 785) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     PO-R--   100   100   016    -    0
  2 Throughput_Performance  P-S---   136   136   054    -    108
  3 Spin_Up_Time            POS---   135   135   024    -    467 (Average 504)
  4 Start_Stop_Count        -O--C-   100   100   000    -    27
  5 Reallocated_Sector_Ct   PO--CK   100   100   005    -    0
  7 Seek_Error_Rate         PO-R--   100   100   067    -    0
  8 Seek_Time_Performance   P-S---   128   128   020    -    18
  9 Power_On_Hours          -O--C-   100   100   000    -    207
 10 Spin_Retry_Count        PO--C-   100   100   060    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    25
192 Power-Off_Retract_Count -O--CK   100   100   000    -    44
193 Load_Cycle_Count        -O--C-   100   100   000    -    44
194 Temperature_Celsius     -O----   171   171   000    -    35 (Min/Max 24/38)
196 Reallocated_Event_Count -O--CK   100   100   000    -    0
197 Current_Pending_Sector  -O---K   100   100   000    -    0
198 Offline_Uncorrectable   ---R--   100   100   000    -    0
199 UDMA_CRC_Error_Count    -O-R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      1  Comprehensive SMART error log
0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x08       GPL     R/O      2  Power Conditions log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters
0x12       GPL     R/O      1  SATA NCQ Queue Management log
0x15       GPL,SL  -        1  Reserved for Serial ATA
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x24       GPL     R/O    128  Current Device Internal Status Data log
0x25       GPL     R/O    128  Saved Device Internal Status Data log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%       207         -
# 2  Extended offline    Completed without error       00%       151         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       256 (0x0100)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    35 Celsius
Power Cycle Min/Max Temperature:     34/37 Celsius
Lifetime    Min/Max Temperature:     24/38 Celsius
Under/Over Temperature Limit Count:   0/0
SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -40/70 Celsius
Temperature History Size (Index):    128 (54)

Index    Estimated Time   Temperature Celsius
  55    2016-06-23 19:19    36  *****************
 ...    ..(100 skipped).    ..  *****************
  28    2016-06-23 21:00    36  *****************
  29    2016-06-23 21:01    35  ****************
  30    2016-06-23 21:02    34  ***************
 ...    ..(  5 skipped).    ..  ***************
  36    2016-06-23 21:08    34  ***************
  37    2016-06-23 21:09    35  ****************
 ...    ..(  8 skipped).    ..  ****************
  46    2016-06-23 21:18    35  ****************
  47    2016-06-23 21:19    34  ***************
  48    2016-06-23 21:20    35  ****************
 ...    ..(  4 skipped).    ..  ****************
  53    2016-06-23 21:25    35  ****************
  54    2016-06-23 21:26    36  *****************

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP Log 0x04)
Page Offset Size         Value  Description
  1  =====  =                =  == General Statistics (rev 2) ==
  1  0x008  4               25  Lifetime Power-On Resets
  1  0x018  6      27127609759  Logical Sectors Written
  1  0x020  6        126682278  Number of Write Commands
  1  0x028  6      53743669032  Logical Sectors Read
  1  0x030  6        213268635  Number of Read Commands
  3  =====  =                =  == Rotating Media Statistics (rev 1) ==
  3  0x008  4              187  Spindle Motor Power-on Hours
  3  0x010  4              187  Head Flying Hours
  3  0x018  4               44  Head Load Events
  3  0x020  4                0  Number of Reallocated Logical Sectors
  3  0x028  4             3267  Read Recovery Attempts
  3  0x030  4                0  Number of Mechanical Start Failures
  4  =====  =                =  == General Errors Statistics (rev 1) ==
  4  0x008  4                0  Number of Reported Uncorrectable Errors
  4  0x010  4                0  Resets Between Cmd Acceptance and Completion
  5  =====  =                =  == Temperature Statistics (rev 1) ==
  5  0x008  1               35  Current Temperature
  5  0x010  1               35~ Average Short Term Temperature
  5  0x018  1                -~ Average Long Term Temperature
  5  0x020  1               38  Highest Temperature
  5  0x028  1               24  Lowest Temperature
  5  0x030  1               36~ Highest Average Short Term Temperature
  5  0x038  1               25~ Lowest Average Short Term Temperature
  5  0x040  1                -~ Highest Average Long Term Temperature
  5  0x048  1                -~ Lowest Average Long Term Temperature
  5  0x050  4                0  Time in Over-Temperature
  5  0x058  1               60  Specified Maximum Operating Temperature
  5  0x060  4                0  Time in Under-Temperature
  5  0x068  1                0  Specified Minimum Operating Temperature
  6  =====  =                =  == Transport Statistics (rev 1) ==
  6  0x008  4                4  Number of Hardware Resets
  6  0x010  4               40  Number of ASR Events
  6  0x018  4                0  Number of Interface CRC Errors
                              |_ ~ normalized value

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2         3877  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            8  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS
#1332 fixed Add HP OEM Intel 320 SSD to drivedb.h Christian Franke Christopher Alexander Chavez
Description

HP OEM Intel 320 SSDs have an H suffix in the model number, e.g. SSDSA2BW160G3H, which is currently not recognized by drivedb.h.

Changing the existing modelregexp string for Intel 320 SSDs from "INTEL SSDSA[12][BCN][WT](040|080|120|160|300|600)G3[ADL]?" to "INTEL SSDSA[12][BCN][WT](040|080|120|160|300|600)G3[ADHL]?" allows these drives to be recognized.

Tested with SSDSA2BW160G3H firmware version 4PC10365 using smartmontools 7.1 on macOS 10.15. I'm not aware whether any other unrecognized vendor suffixes exist for this model family.

Note: See TracQuery for help on using queries.