Custom Query (1328 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (31 - 33 of 1328)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
Ticket Resolution Summary Owner Reporter
#615 wontfix Apple TS0256F shows spurious FAILING_NOW results Chris Ferebee
Description

I have a 256 GB SSD in my 2014 11" MacBook Air, OS X 10.11.0. I believe the TS0256F is manufactured by Toshiba, while many MacBooks use an SM0256F manufactured by Samsung.

Almost all parameters are listed as FAILING_NOW, but the SSD appears to function normally in every way. For example, when the MacBook is idle, temperature is reported as 32 (see below), and with the SSD under heavy continuous write load the temperature parameter will go up to 82. Read and write speeds are as expected, around 550/450 MB/s.

I understand that attribute 173 (Wear_Leveling_Count) starts at 200 and counts down, triggering an error when it reaches 100. It's currently at 197, which I take as confirmation that the drive has not been overused.

Is this just a cosmetic bug?

# smartctl -a /dev/disk0
smartctl 6.4 2015-06-04 r4109 [x86_64-apple-darwin15.0.0] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Apple SD/SM/TS...E/F SSDs
Device Model:     APPLE SSD TS0256F
Serial Number:    34GSxxxxxxxx
Firmware Version: 109R0219
User Capacity:    251,000,193,024 bytes [251 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: >6.0 Gb/s (4))
Local Time is:    Sat Oct 10 16:13:56 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x00) 	Offline data collection not supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x00)	Error logging NOT supported.
					No General Purpose Logging support.

SMART Attributes Data Structure revision number: 40
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0000   000   100   100    Old_age   Offline  FAILING_NOW 0
  5 Reallocated_Sector_Ct   0x0000   000   100   100    Old_age   Offline  FAILING_NOW 0
  9 Power_On_Hours          0x0000   000   100   100    Old_age   Offline  FAILING_NOW 144
 12 Power_Cycle_Count       0x0000   000   100   100    Old_age   Offline  FAILING_NOW 3360
169 Unknown_Attribute       0x0008   100   100   010    Old_age   Offline      -       1851873300992
173 Wear_Leveling_Count     0x0010   197   197   100    Old_age   Offline      -       77315768372
192 Power-Off_Retract_Count 0x0000   000   100   100    Old_age   Offline  FAILING_NOW 20
194 Temperature_Celsius     0x0000   068   100   100    Old_age   Offline  FAILING_NOW 32 (Min/Max 18/83)
197 Current_Pending_Sector  0x0000   100   100   100    Old_age   Offline  FAILING_NOW 0
199 UDMA_CRC_Error_Count    0x0000   000   100   100    Old_age   Offline  FAILING_NOW 0
174 Host_Reads_MiB          0x0000   015   100   100    Old_age   Offline  FAILING_NOW 24191827
175 Host_Writes_MiB         0x0000   021   100   100    Old_age   Offline  FAILING_NOW 3980335
151 Unknown_Attribute       0x0086   000   000   ---    Old_age   Always       -       0

SMART Error Log not supported

SMART Self-test Log not supported

Selective Self-tests/Logging not supported

#618 worksforme Add Crucial_CT960M500SSD1 to database Vincent Danjean
Description

Hi, I've a disk that is not in the smart database:

Device Model:     Crucial_CT960M500SSD1
Serial Number:    14010960553B
LU WWN Device Id: 5 00a075 10960553b
Firmware Version: MU03
User Capacity:    960 197 124 096 bytes [960 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]

Looking for information, I found #326 and referenced commits 3925 and 3926 that suggests me that I should be just needed to add the reference of my disk in smartctl database, hence this bug report. Here is the current report of smartctl (with smartmontools 6.3+svn4002 as in the Debian package):

Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate     0x002f   100   100   000    Pre-fail  Always       -       0
5 Reallocated_Sector_Ct   0x0033   100   100   000    Pre-fail  Always       -       0
9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       14138
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       24
171 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
173 Unknown_Attribute       0x0032   094   094   000    Old_age   Always       -       204
174 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       8
180 Unused_Rsvd_Blk_Cnt_Tot 0x0033   000   000   000    Pre-fail  Always       -       16523
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   000    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   061   050   000    Old_age   Always       -       39 (Min/Max 0/50)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       16
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       0
202 Unknown_SSD_Attribute   0x0031   094   094   000    Pre-fail  Offline      -       6
206 Unknown_SSD_Attribute   0x000e   100   100   000    Old_age   Always       -       0
210 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
246 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       14853124027
247 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       696996831
248 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       3912597374

The current drivedb.h does not seem to list my disk for now (I did not compile and test the last svn commit, I just looked at the sources) : trunk/smartmontools/drivedb.h: [...]

    "Crucial_CT(120|240|480)M500SSD[13]", // Marvell 88SS9187 BLD2, tested with Crucial_CT120M500SSD3/MU02,
    // Crucial_CT120M500SSD1/MU02, Crucial_CT240M500SSD1/MU03, Crucial_CT480M500SSD1/MU03

[...]

Regards,

Vincent

#623 wontfix USB enclosure SK-3500 Super-S tokahoma
Description

https://www.smartmontools.org/wiki/Supported_USB-Devices

hi there,

i would like to report a missing enclosure http://www.inxtron.com/desktop-hard-drive-enclosures/sk-3500-super-s

you just have written the newer s3 in your list. and: something strange on mac os x.9 & drivedx:

sometimes it was displayed as smart compatible.

but i did have some problems on slow finder, so trashed the smartap by inxtron as they wrote "just beyond 10.6.8"

and after them i installed new https://github.com/kasbert/OS-X-SAT-SMART-Driver. every versions of them after another, but the missing WDgreens did not come back

so i installed version 8 but rrom drivedx-site

nothing changed

maybe you have an idea

sincerly

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.