Custom Query (1070 matches)
Results (28 - 30 of 1070)
Ticket | Resolution | Summary | Owner | Reporter |
---|---|---|---|---|
#1386 | fixed | Drive not in Database - ADATA M.2 SSD (ADATA SU650NS38) | ||
Description |
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-STABLE amd64] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ADATA SU650NS38 Serial Number: 2K352L1S5AJW LU WWN Device Id: 5 000000 000000000 Firmware Version: P191202a User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Oct 23 08:33:27 2020 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 33) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 0 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 9 Power_On_Hours -O--C- 100 100 000 - 47 12 Power_Cycle_Count -O--C- 100 100 000 - 5 167 Unknown_Attribute -O---K 100 100 000 - 0 168 Unknown_Attribute -O--C- 100 100 000 - 0 169 Unknown_Attribute PO--C- 083 083 010 - 5636139 173 Unknown_Attribute -O--C- 200 200 000 - 17180196868 175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 444 192 Power-Off_Retract_Count -O--C- 100 100 000 - 5 194 Temperature_Celsius -O---K 061 061 030 - 39 (Min/Max 15/47) 231 Unknown_SSD_Attribute PO--CK 100 100 005 - 0 233 Media_Wearout_Indicator -O--CK 100 100 000 - 312642560 234 Unknown_Attribute -O--CK 100 100 000 - 86365312 241 Total_LBAs_Written -O--CK 100 100 000 - 255160266 242 Total_LBAs_Read -O--CK 100 100 000 - 215015835 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 47 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: ?/40 Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -127/127 Celsius Min/Max Temperature Limit: -127/127 Celsius Temperature History Size (Index): 478 (425) Index Estimated Time Temperature Celsius 426 2020-10-23 00:36 39 ******************** 427 2020-10-23 00:37 40 ********************* 428 2020-10-23 00:38 39 ******************** 429 2020-10-23 00:39 40 ********************* 430 2020-10-23 00:40 39 ******************** ... ..( 3 skipped). .. ******************** 434 2020-10-23 00:44 39 ******************** 435 2020-10-23 00:45 40 ********************* 436 2020-10-23 00:46 40 ********************* 437 2020-10-23 00:47 40 ********************* 438 2020-10-23 00:48 39 ******************** 439 2020-10-23 00:49 39 ******************** 440 2020-10-23 00:50 40 ********************* 441 2020-10-23 00:51 40 ********************* 442 2020-10-23 00:52 39 ******************** Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 5 --- Lifetime Power-On Resets 0x01 0x010 4 47 --- Power-on Hours 0x01 0x018 6 255160266 --- Logical Sectors Written 0x01 0x020 6 1424007 --- Number of Write Commands 0x01 0x028 6 215015835 --- Logical Sectors Read 0x01 0x030 6 851762 --- Number of Read Commands 0x01 0x038 6 43120211460 --- Date and Time TimeStamp 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 14 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC |
|||
#1385 | fixed | Add to DB: Unknown Device APPLE HDD WDC WD10EALX-408EA0 (WD OEM) | ||
Description |
It comes from a Apple IMac 2012. # cat /tmp/smartctl-APPLE-HDD_WDC_WD10EALX-408EA0 :( smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-1-grml-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: APPLE HDD WDC WD10EALX-408EA0 Firmware Version: 07.01D03 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Oct 23 11:56:34 2020 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (16080) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 186) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0xb037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 176 172 021 - 4191 4 Start_Stop_Count -O--CK 001 001 000 - 101587 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 085 085 000 - 11166 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 001 001 000 - 101586 192 Power-Off_Retract_Count -O--CK 065 065 000 - 101472 193 Load_Cycle_Count -O--CK 200 200 000 - 114 194 Temperature_Celsius -O---K 116 094 000 - 31 195 Hardware_ECC_Recovered -OS-CK 200 200 000 - 0 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb4 GPL,SL VS 1 Device vendor specific log 0xb5 GPL,SL VS 128 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 11166 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 27/31 Celsius Lifetime Min/Max Temperature: 27/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (185) Index Estimated Time Temperature Celsius 186 2020-10-23 03:59 49 ****************************** ... ..( 70 skipped). .. ****************************** 257 2020-10-23 05:10 49 ****************************** 258 2020-10-23 05:11 50 ******************************* 259 2020-10-23 05:12 49 ****************************** ... ..( 7 skipped). .. ****************************** 267 2020-10-23 05:20 49 ****************************** 268 2020-10-23 05:21 50 ******************************* 269 2020-10-23 05:22 50 ******************************* 270 2020-10-23 05:23 49 ****************************** ... ..( 3 skipped). .. ****************************** 274 2020-10-23 05:27 49 ****************************** 275 2020-10-23 05:28 50 ******************************* 276 2020-10-23 05:29 49 ****************************** ... ..( 4 skipped). .. ****************************** 281 2020-10-23 05:34 49 ****************************** 282 2020-10-23 05:35 50 ******************************* 283 2020-10-23 05:36 49 ****************************** ... ..( 2 skipped). .. ****************************** 286 2020-10-23 05:39 49 ****************************** 287 2020-10-23 05:40 50 ******************************* 288 2020-10-23 05:41 49 ****************************** 289 2020-10-23 05:42 49 ****************************** 290 2020-10-23 05:43 50 ******************************* ... ..( 7 skipped). .. ******************************* 298 2020-10-23 05:51 50 ******************************* 299 2020-10-23 05:52 49 ****************************** 300 2020-10-23 05:53 49 ****************************** 301 2020-10-23 05:54 50 ******************************* ... ..( 47 skipped). .. ******************************* 349 2020-10-23 06:42 50 ******************************* 350 2020-10-23 06:43 ? - 351 2020-10-23 06:44 27 ******** 352 2020-10-23 06:45 27 ******** 353 2020-10-23 06:46 28 ********* 354 2020-10-23 06:47 29 ********** 355 2020-10-23 06:48 29 ********** 356 2020-10-23 06:49 30 *********** 357 2020-10-23 06:50 31 ************ 358 2020-10-23 06:51 49 ****************************** ... ..( 11 skipped). .. ****************************** 370 2020-10-23 07:03 49 ****************************** 371 2020-10-23 07:04 50 ******************************* 372 2020-10-23 07:05 49 ****************************** ... ..( 7 skipped). .. ****************************** 380 2020-10-23 07:13 49 ****************************** 381 2020-10-23 07:14 50 ******************************* 382 2020-10-23 07:15 49 ****************************** 383 2020-10-23 07:16 49 ****************************** 384 2020-10-23 07:17 50 ******************************* 385 2020-10-23 07:18 50 ******************************* 386 2020-10-23 07:19 49 ****************************** ... ..( 17 skipped). .. ****************************** 404 2020-10-23 07:37 49 ****************************** 405 2020-10-23 07:38 50 ******************************* 406 2020-10-23 07:39 49 ****************************** ... ..( 16 skipped). .. ****************************** 423 2020-10-23 07:56 49 ****************************** 424 2020-10-23 07:57 50 ******************************* 425 2020-10-23 07:58 49 ****************************** ... ..(237 skipped). .. ****************************** 185 2020-10-23 11:56 49 ****************************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 441 Vendor specific |
|||
#1384 | fixed | SAMSUNG MZYLN256HCHP-000L2 | ||
Description |
Need to add missing attributes: From Samsung Magician missing attributes exported as CSV: Result,ID,Description,Threshold,Current Value,Worst Value,Raw Data,Status, 170,Unused Reserved Block Count (chip),10,100,100,0,OK 171,Program Fail Count (chip),10,100,100,0,OK 172,Erase Fail Count (chip),10,100,100,0,OK 173,Wear Leveling Count,5,95,95,99,OK 174,Unexpected Power Loss Count,0,99,99,44,OK 249,NAND GB Written,0,99,99,25344,OK |
Note: See TracQuery
for help on using queries.