Custom Query (1560 matches)
Results (292 - 294 of 1560)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #1590 | fixed | add to drivedb: Sandisk Ultra 3D 1TB SDSSDH3 1T00 (different naming than currently in DB) | ||
| Description |
The Sandisk Ultra 3D is already in the database, however this particular 1TB version is not. |
|||
| #1569 | fixed | add to drivedb: Sandisk SD9SN8W (SD9SN8W128G1020) | ||
| Description |
Could you add the following disk reference in the smartctl database ? Here is the smartctl -a output: === START OF INFORMATION SECTION === Device Model: SanDisk SD9SN8W128G1020 Serial Number: .... LU WWN Device Id: 5 001b44 8b994b732 Firmware Version: X6101020 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: M.2 Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Feb 15 01:21:47 2022 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 26536 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 25 165 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 1356418753 166 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 104 167 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 34 168 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 172 169 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 102 170 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 171 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 173 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 145 174 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 5 184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0 194 Temperature_Celsius 0x0022 064 070 --- Old_age Always - 36 (Min/Max 27/70) 199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0 230 Unknown_SSD_Attribute 0x0032 100 100 --- Old_age Always - 44118142232608 232 Available_Reservd_Space 0x0033 100 100 004 Pre-fail Always - 100 233 Media_Wearout_Indicator 0x0032 100 100 --- Old_age Always - 18443 234 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 56778 241 Total_LBAs_Written 0x0030 253 253 --- Old_age Offline - 40598 242 Total_LBAs_Read 0x0030 253 253 --- Old_age Offline - 39691 244 Unknown_Attribute 0x0032 000 100 --- Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported |
|||
| #1112 | fixed | add to drivedb: Sandisk SD9SB8W (128G1122 / 512G-1006 / 256G-1122 / 1T-1122) | ||
| Description |
Could you add the following disk reference in the smartctl database ? Here is the smartctl -a output: >smartctl -a /dev/ada0
smartctl 6.3 2014-07-26 r3976 [NS-BSD 2.7.2- amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SanDisk SD9SB8W128G1122
Serial Number: 174970801128
LU WWN Device Id: 5 001b44 8b688bbc1
Firmware Version: X6104000
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: Unknown(0x0ff0) (unknown minor revision code: 0x005e)
SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Oct 19 08:23:03 2018 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SMART Attributes Data Structure revision number: 4
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 362
12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 7
165 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 65536
166 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
167 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 23
168 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
169 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 78
170 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
171 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
173 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
174 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 4
184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0
188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0
194 Temperature_Celsius 0x0022 072 041 --- Old_age Always - 28 (Min/Max 25/41)
199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0
230 Unknown_SSD_Attribute 0x0032 100 100 --- Old_age Always - 0
232 Available_Reservd_Space 0x0033 100 100 004 Pre-fail Always - 100
233 Media_Wearout_Indicator 0x0032 100 100 --- Old_age Always - 0
234 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 1
241 Total_LBAs_Written 0x0030 253 253 --- Old_age Offline - 1
242 Total_LBAs_Read 0x0030 253 253 --- Old_age Offline - 0
244 Unknown_Attribute 0x0032 000 100 --- Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
Many thanks |
|||
Note:
See TracQuery
for help on using queries.
