Custom Query (1556 matches)
Results (271 - 273 of 1556)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #150 | fixed | Adding scterc set command to smartd | ||
| Description |
Please add scterc set command to smartd if possible |
|||
| #881 | fixed | Addition to DB: Toshiba HDWD120 | ||
| Description |
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-3.17.8-gentoo-r1] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA HDWD120
Firmware Version: MX4OACF0
User Capacity: 2,000,398,934,016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Sep 21 12:58:37 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (14344) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 239) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S--- 100 100 054 - 0
3 Spin_Up_Time POS--- 100 100 024 - 0
4 Start_Stop_Count -O--C- 100 100 000 - 4
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 100 100 020 - 0
9 Power_On_Hours -O--C- 100 100 000 - 12
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 4
192 Power-Off_Retract_Count -O--CK 100 100 000 - 4
193 Load_Cycle_Count -O--C- 100 100 000 - 4
194 Temperature_Celsius -O---- 171 171 000 - 35 (Min/Max 25/36)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 7 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 1 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 12 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: 26/35 Celsius
Lifetime Min/Max Temperature: 25/36 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (83)
Index Estimated Time Temperature Celsius
84 2017-09-21 10:51 34 ***************
... ..(126 skipped). .. ***************
83 2017-09-21 12:58 34 ***************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 4 --- Lifetime Power-On Resets
0x01 0x010 4 12 --- Power-on Hours
0x01 0x018 6 1957126602 --- Logical Sectors Written
0x01 0x020 6 2253184 --- Number of Write Commands
0x01 0x028 6 1944309681 --- Logical Sectors Read
0x01 0x030 6 2160241 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 12 --- Spindle Motor Power-on Hours
0x03 0x010 4 12 --- Head Flying Hours
0x03 0x018 4 4 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 6 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 34 --- Current Temperature
0x05 0x010 1 - N-- Average Short Term Temperature
0x05 0x018 1 - N-- Average Long Term Temperature
0x05 0x020 1 36 --- Highest Temperature
0x05 0x028 1 25 --- Lowest Temperature
0x05 0x030 1 - N-- Highest Average Short Term Temperature
0x05 0x038 1 - N-- Lowest Average Short Term Temperature
0x05 0x040 1 - N-- Highest Average Long Term Temperature
0x05 0x048 1 - N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 10 --- Number of Hardware Resets
0x06 0x010 4 7 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|||
| #1715 | fixed | Allow to ignore certain bits of NVMe Critical Warning byte | ||
| Description |
I have a Samsung SSD 960 EVO 250GB with 424TB written. The drive stores large amounts of RRD files for an SNMP-type monitoring system and gets re-written constantly. The manufacturer warranty for this drive is 100TB, so we are 424% beyond the warranty and thus the "Percentage Used" value. However, the drive works fine and shows no other signs of wearing out. I recently did an OS update on this Debian host, from Debian 10 to 11, and along with it came a new version of smartmontools. Unfortunately it now complains every 24 hours with the following error: The following warning/error was logged by the smartd daemon: Device: /dev/nvme0, Critical Warning (0x04): Reliability I have been forced to add a "/dev/nvme0 -d ignore" to my /etc/smartd.conf file, but this prevents me from being alerted to any other possible problems, including any reduction of the "Available Spare" value, or thermal warnings. With ATA drives, it's possible it ignore certain specific attributes with the -i or -I arguments, but I'm not aware of any similar feature which might be helpful here. Would it be possible to ignore such warnings, while still monitoring the device for other problems? What do you advise? I suspect this problem will occur more regularly as time goes on and more too-reliable-for-their-own-damned-good drives will begin to annoy their administrators. The only crime this drive has committed is it's failure to fail! Please end this unfair persecution of my poor, abused but reliable, NVME drive! This request on Serverfault is similar to mine and might be worth a read (I am not the author):
My searching found that this request is somewhat similar to bug 1434: Below is full output from a smartctl -a. > sudo smartctl -a /dev/disk/by-id/nvme-Samsung_SSD_960_EVO_250GB_xxxxxxxxxxxxxxx smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-21-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 960 EVO 250GB Serial Number: xxxxxxxxxxxxxxx Firmware Version: 2B7QCXE7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 250,059,350,016 [250 GB] Unallocated NVM Capacity: 0 Controller ID: 2 NVMe Version: 1.2 Number of Namespaces: 1 Namespace 1 Size/Capacity: 250,059,350,016 [250 GB] Namespace 1 Utilization: 191,818,444,800 [191 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: xxxxxxxxxxxxxxxxx Local Time is: Thu Apr 6 20:23:49 2023 MST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0007): Security Format Frmw_DL Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 77 Celsius Critical Comp. Temp. Threshold: 79 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.04W - - 0 0 0 0 0 0 1 + 5.09W - - 1 1 1 1 0 0 2 + 4.08W - - 2 2 2 2 0 0 3 - 0.0400W - - 3 3 3 3 210 1500 4 - 0.0050W - - 4 4 4 4 2200 6000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! - NVM subsystem reliability has been degraded SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x04 Temperature: 28 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 255% Data Units Read: 151,762,677 [77.7 TB] Data Units Written: 830,060,020 [424 TB] Host Read Commands: 6,877,731,354 Host Write Commands: 51,000,719,462 Controller Busy Time: 79,390 Power Cycles: 35 Power On Hours: 31,418 Unsafe Shutdowns: 21 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 28 Celsius Temperature Sensor 2: 35 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged |
|||
Note:
See TracQuery
for help on using queries.
