Custom Query (1406 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (175 - 177 of 1406)

Ticket Resolution Summary Owner Reporter
#1888 wontfix Add support for SanDisk Extreme Portable SSD on macOS (0x174c:0x2362) gio91ber
Description

Model name SDSSDE61-4T00, 4.O TB

lsusb output is:

Bus 000 Device 001: ID 174c:2362 ASMedia Technology Inc. AS2360  Serial: 323235324753343031303833

with -v

        AS2360:

          Product ID: 0x2362
          Vendor ID: 0x174c  (ASMedia Technology Inc.)
          Version: 80.55
          Serial Number: 323235324753343031303833
          Speed: Up to 10 Gb/s
          Manufacturer: ASMedia
          Location ID: 0x00200000 / 1
          Current Available (mA): 900
          Current Required (mA): 896
          Extra Operating Current (mA): 0
          Media:
              Capacity: 4 TB (4.000.753.467.904 bytes)
              Removable Media: No
              BSD Name: disk4
              Logical Unit: 0
              Partition Map Type: GPT (GUID Partition Table)
              S.M.A.R.T. status: Verified
              USB Interface: 0
              Volumes:
                QuattroTera:
                  Capacity: 4 TB (4.000.751.550.464 bytes)
                  Free: 1,54 TB (1.536.600.047.616 bytes)
                  Writable: Yes
                  File System: ExFAT
                  BSD Name: disk4s1

Smartctl doesn't seem to be able to read its smart status but I'm sure the drive have some SMART data logged as there is a WD/SanDisk dashboard for windows can give a very detailed SMART data dump about the disk itself.

Here is the output of smartctl I'm working on macOS 15.0.1 (24A348) with SAT SMART driver (https://binaryfruit.com/blog/we-released-sat-smart-driver-for-apple-silicon-macs) installed in order for smartctl to read smart data from usb connected devices.

smartctl -a /dev/disk4

smartctl 7.4 2023-08-01 r5530 [Darwin 24.0.0 arm64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     [No Information Found]
Serial Number:    [No Information Found]
Firmware Version: [No Information Found]
Device is:        Not in smartctl database 7.3/5528
ATA Version is:   [No Information Found]
Local Time is:    Sat Oct  5 16:26:17 2024 CEST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

with smartctl -a /dev/disk4 -T permissive

smartctl 7.4 2023-08-01 r5530 [Darwin 24.0.0 arm64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     [No Information Found]
Serial Number:    [No Information Found]
Firmware Version: [No Information Found]
Device is:        Not in smartctl database 7.3/5528
ATA Version is:   [No Information Found]
Local Time is:    Sat Oct  5 16:26:37 2024 CEST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
                  Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Warning! SMART Attribute Data Structure error: invalid SMART checksum.
Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x00) 	Offline data collection not supported.
SMART capabilities:            (0x0000)	Automatic saving of SMART data					is not implemented.
Error logging capability:        (0x00)	Error logging NOT supported.
					No General Purpose Logging support.

SMART Error Log not supported

SMART Self-test Log not supported

Selective Self-tests/Logging not supported

The above only provides legacy SMART information - try 'smartctl -x' for more

with smartctl -a /dev/disk4 -T permissive -x

smartctl 7.4 2023-08-01 r5530 [Darwin 24.0.0 arm64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     [No Information Found]
Serial Number:    [No Information Found]
Firmware Version: [No Information Found]
User Capacity:    316. 018. 688 bytes [316 MB]
Sector Size:      512 bytes logical/physical
Form Factor:      < 1.8 inches
Zoned Device:     Host Aware Zones
Device is:        Not in smartctl database 7.3/5528
ATA Version is:   ATA/ATAPI-7 (unknown minor revision code: 0x0063)
Local Time is:    Sat Oct  5 16:26:56 2024 CEST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
                  Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Unavailable
Write cache is:   Unavailable
DSN feature is:   Unavailable
ATA Security is:  Unavailable
Wt Cache Reorder: Unavailable

Warning! SMART Attribute Data Structure error: invalid SMART checksum.
Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x00) 	Offline data collection not supported.
SMART capabilities:            (0x0000)	Automatic saving of SMART data					is not implemented.
Error logging capability:        (0x00)	Error logging NOT supported.
					No General Purpose Logging support.

General Purpose Log Directory not supported

SMART Log Directory Version 3
Address    Access  R/W   Size  Description
0x00           SL  R/O      1  Log Directory
0x03           SL  R/O      2  Ext. Comprehensive SMART error log
0x08           SL  R/O    112  Power Conditions log
0x09           SL  R/W      5  Selective self-test log
0x0e           SL  -       32  Reserved for ZAC-2

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

SMART Error Log not supported

SMART Extended Self-test Log (GP Log 0x07) not supported

SMART Self-test Log not supported

Selective Self-tests/Logging not supported

SCT Commands not supported

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11) not supported
#337 fixed Add support for SanDisk SSD U100 series Christian Franke PSzlubecki
Description

The device isn't recognized and some impotent attributes are unknown or has wrong name.

smartctl -q noserial -x /dev/sda :

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-30-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     SanDisk SSD U100 8GB
Firmware Version: 10.56.00
User Capacity:    8,012,390,400 bytes [8,01 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Jul  1 12:31:52 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  120) seconds.
Offline data collection
capabilities:                    (0x51) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (   2) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  5 Reallocated_Sector_Ct   -O----   100   100   000    -    0
  9 Power_On_Hours          -O----   100   100   000    -    329
 12 Power_Cycle_Count       -O----   100   100   000    -    31
171 Unknown_Attribute       -O----   100   100   000    -    0
172 Unknown_Attribute       -O----   100   100   000    -    0
173 Unknown_Attribute       -O----   100   100   000    -    0
174 Unknown_Attribute       -O----   100   100   000    -    21
187 Reported_Uncorrect      -O----   100   100   000    -    0
230 Unknown_SSD_Attribute   -O----   100   100   000    -    0
232 Available_Reservd_Space PO----   100   100   005    -    0
234 Unknown_Attribute       -O----   100   100   000    -    3
241 Total_LBAs_Written      -O----   100   100   000    -    8955010
242 Total_LBAs_Read         -O----   100   100   000    -    8066998
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01       GPL,SL  R/O      1  Summary SMART error log
0x03       GPL,SL  R/O     16  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06       GPL,SL  R/O      1  SMART self-test log
0x10       GPL,SL  R/O      1  NCQ Command Error log
0x11       GPL,SL  R/O      1  SATA Phy Event Counters
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS       1  Device vendor specific log
0xa2       GPL,SL  VS       2  Device vendor specific log
0xa3       GPL,SL  VS       1  Device vendor specific log

Warning! SMART Extended Comprehensive Error Log Structure (16/16) error: invalid SMART checksum.
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
No Errors Logged

SMART Extended Self-test Log (GP Log 0x07) not supported

Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       10%       307         -
# 2  Short offline       Aborted by host               80%       307         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Commands not supported

Device Statistics (GP Log 0x04)
Page Offset Size         Value  Description
  5  =====  =                =  == Temperature Statistics (rev 1) ==
  5  0x008  1               31  Current Temperature
  5  0x010  1               30  Average Short Term Temperature
  5  0x018  1                -  Average Long Term Temperature
  5  0x020  1               37  Highest Temperature
  5  0x028  1               26  Lowest Temperature
  5  0x030  1               34  Highest Average Short Term Temperature
  5  0x038  1               34  Lowest Average Short Term Temperature
  5  0x040  1                -  Highest Average Long Term Temperature
  5  0x048  1                -  Lowest Average Long Term Temperature
  5  0x050  4                0  Time in Over-Temperature
  5  0x058  1               95  Specified Maximum Operating Temperature
  5  0x060  4                0  Time in Under-Temperature
  5  0x068  1                0  Specified Minimum Operating Temperature
  7  =====  =                =  == Solid State Device Statistics (rev 1) ==
  7  0x008  1                0~ Percentage Used Endurance Indicator
                              |_ ~ normalized value

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0009  2            5  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            6  Device-to-host register FISes sent due to a COMRESET
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x0001  2            0  Command failed due to ICRC error


Meaning of attributes grabbed from original SanDisk tools for windows

	<SmartDataDefinition Name="SanDisk P-Series" Priority="1102" Inherits="SuppressAll" DefaultDataFormat="Worst[1],Raw[4]">

		<DeviceClassificationRule>
			<Model Regex="SanDisk SDSSD[PR].*" CaseSensitive="false"/>
			<Serial Regex=".*" CaseSensitive="false"/>
			<Firmware Regex=".*" CaseSensitive="false"/>
		</DeviceClassificationRule>
		
		<!-- P series -->
		<DeviceClassificationRule>
			<Model Regex="SanDisk SSD U100 .*" CaseSensitive="false"/>
			<Serial Regex=".*" CaseSensitive="false"/>
			<Firmware Regex=".*" CaseSensitive="false"/>
		</DeviceClassificationRule>

		<Attribute ID="5" Name="ReallocatedSectorCount" Display="true"/>
		<Attribute ID="9" Name="PowerOnHours" Display="true"/>
		<Attribute ID="12" Name="PowerCycleCount" Display="true"/>
		<Attribute ID="171" Name="ProgramFailCount" Display="true"/>
		<Attribute ID="172" Name="EraseFailCount" Display="true"/>
		<Attribute ID="173" Name="AverageWriteEraseCount" Display="true"/>
		<Attribute ID="174" Name="UnexpectedPowerLossCount" Display="true"/>
		<Attribute ID="187" Name="ReportedUncorrectableErrors" Display="true"/>
		<Attribute ID="230" DataFormat="Worst[1],Raw[4]" Name="PercentWriteEraseCount" Display="true"/>
		<Attribute ID="232" DataFormat="" Name="PercentageReserveSpaceAvailable" Display="true"/>
		<Attribute ID="234" DataFormat="Worst[1],Raw[4]" Name="PercentWriteEraseCountBC" Display="true"/>
		<Attribute ID="241" DataFormat="Worst[1],Raw[7]" Name="LBASectorsWritten" Display="true"/>
		<Attribute ID="242" DataFormat="Worst[1],Raw[7]" Name="LBASectorsRead" Display="true"/>
	</SmartDataDefinition>

Created by my drverdb record for test purpose

  {
    "SanDisk SSD U100 Series",
    "SanDisk SSD U100 .*",
    "", "",
    "-v 5,raw48,Reallocated_Sector_Ct "
    "-v 9,raw48,Power_On_Hours "
    "-v 12,raw48,Power_Cycle_Count "
    "-v 171,raw48,Program_Fail_Count "
    "-v 172,raw48,Erase_Fail_Count "
    "-v 173,raw48,Avg_Write_Erase_Ct "
    "-v 174,raw48,Unexpect_Power_Loss_Ct "
    "-v 187,raw48,Reported_Uncorrect "
    "-v 230,raw48,Perc_Write_Erase_Count "
    "-v 232,raw48,Perc_Reserve_Space_Avai "
    "-v 234,raw48,Perc_Write_Erase_Ct_BC "
    "-v 241,raw48,LBA_Sectors_Written "
    "-v 242,raw48,LBA_Sectors_Read "
  }

smartctl -q noserial -A /dev/sda after modify drivedb by hand

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-30-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0002   100   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0002   100   100   000    Old_age   Always       -       329
 12 Power_Cycle_Count       0x0002   100   100   000    Old_age   Always       -       31
171 Program_Fail_Count      0x0002   100   100   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0002   100   100   000    Old_age   Always       -       0
173 Avg_Write_Erase_Ct      0x0002   100   100   000    Old_age   Always       -       0
174 Unexpect_Power_Loss_Ct  0x0002   100   100   000    Old_age   Always       -       21
187 Reported_Uncorrect      0x0002   100   100   000    Old_age   Always       -       0
230 Perc_Write_Erase_Count  0x0002   100   100   000    Old_age   Always       -       0
232 Perc_Reserve_Space_Avai 0x0003   100   100   005    Pre-fail  Always       -       0
234 Perc_Write_Erase_Ct_BC  0x0002   100   100   000    Old_age   Always       -       3
241 LBA_Sectors_Written     0x0002   100   100   000    Old_age   Always       -       8956330
242 LBA_Sectors_Read        0x0002   100   100   000    Old_age   Always       -       8066998
#334 fixed Add support for Sandisk Extreme II SSD drives Christian Franke sserdyuk
Description

The drives are not recognized, and SMART attributes aren't presented correctly. I am providing the current smartctl output as well as Sandisk's proprietary utility output showing the meaning of the attributes:

# smartctl -x /dev/sdc

smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-63-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     SanDisk SDSSDXP480G
Serial Number:    134322400436
LU WWN Device Id: 5 001b44 a51d228b4
Firmware Version: R1311
User Capacity:    480,103,981,056 bytes [480 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Wed Jun  4 10:46:20 2014 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x11) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  10) minutes.

SMART Attributes Data Structure revision number: 4
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  5 Reallocated_Sector_Ct   -O--CK   100   100   ---    -    0
  9 Power_On_Hours          -O--CK   253   100   ---    -    3582
 12 Power_Cycle_Count       -O--CK   100   100   ---    -    12
166 Unknown_Attribute       -O--CK   100   100   ---    -    1
167 Unknown_Attribute       -O--CK   100   100   ---    -    41
168 Unknown_Attribute       -O--CK   100   100   ---    -    81
169 Unknown_Attribute       -O--CK   100   100   ---    -    756
171 Unknown_Attribute       -O--CK   100   100   ---    -    0
172 Unknown_Attribute       -O--CK   100   100   ---    -    0
173 Unknown_Attribute       -O--CK   100   100   ---    -    10
174 Unknown_Attribute       -O--CK   100   100   ---    -    2
187 Reported_Uncorrect      -O--CK   100   100   ---    -    0
194 Temperature_Celsius     -O---K   067   038   ---    -    33 (Min/Max 24/38)
212 Unknown_Attribute       -O--CK   100   100   ---    -    0
230 Head_Amplitude          -O--CK   100   100   ---    -    33
232 Available_Reservd_Space PO--CK   100   100   004    -    100
233 Media_Wearout_Indicator -O--CK   100   100   ---    -    5385
241 Total_LBAs_Written      ----CK   253   253   ---    -    2433
242 Total_LBAs_Read         ----CK   253   253   ---    -    3335
243 Unknown_Attribute       -O--CK   100   100   ---    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
GP/S  Log at address 0x00 has    1 sectors [Log Directory]
SMART Log at address 0x01 has    1 sectors [Summary SMART error log]
SMART Log at address 0x02 has    2 sectors [Comprehensive SMART error log]
GP    Log at address 0x03 has    1 sectors [Ext. Comprehensive SMART error log]
GP/S  Log at address 0x04 has    8 sectors [Device Statistics]
SMART Log at address 0x06 has    1 sectors [SMART self-test log]
GP    Log at address 0x07 has    1 sectors [Extended self-test log]
GP    Log at address 0x10 has    1 sectors [NCQ Command Error]
GP    Log at address 0x11 has    1 sectors [SATA Phy Event Counters]
GP/S  Log at address 0x30 has    9 sectors [Reserved]
GP/S  Log at address 0x80 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x81 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x82 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x83 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x84 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x85 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x86 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x87 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x88 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x89 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x90 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x91 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x92 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x93 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x94 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x95 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x96 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x97 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x98 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x99 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9f has   16 sectors [Host vendor specific log]

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Device does not support Selective Self Tests/Logging
Warning: device does not support SCT Commands
SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  4            0  Command failed due to ICRC error
0x0002  4            0  R_ERR response for data FIS
0x0005  4            0  R_ERR response for non-data FIS
0x000a  4          142  Device-to-host register FISes sent due to a COMRESET

From Sandisk utility:

Sandisk Extreme II (firmware: R1311)

  5 / 05 - Retired Block Count [1 block = 4 MB]
  9 / 09 - Power On Hours
 12 / 0C - Device Power Cycle Count

166 / A6 - Min W/E Cycle
167 / A7 - Min Bad Block/Die
168 / A8 - Maximum Erase Cycle
169 / A9 - Total Bad Block

171 / AB - Program Fail Count
172 / AC - Erase Fail Count
173 / AD - Average Erase Cycle
174 / AE - Unexpected Power Loss Count

187 / BB - Reported Uncorrectable Errors

194 / C2 - Current Temperature

212 / D4 - SATA PHY Error

230 / E6 - Percentage Total P/E Count XX.YY
232 / E8 - Spare Blocks Remaining [%]
233 / E9 - Total GB Written to NAND
241 / F1 - Total GB Written
242 / F2 - Total GB Read
Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.