Custom Query (1453 matches)

This patch adds in all currently defined status strings for ASC 0xb. In particular, I find that Seagate ST16000NM002G disks frequently return 0xb/0x14 .

The new Apple SSDs seem to have the same odd values. Someone added 173 as Wear_Leveling_Count which doesn't seem right to me. I added the G model to my local copy.

=== START OF INFORMATION SECTION ===
Model Family:     Apple SD/SM/TS...E/F SSDs
Device Model:     APPLE SSD SM0512G
Firmware Version: BXW1SA0Q
User Capacity:    500,277,790,720 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Mar 14 12:13:03 2016 EDT


ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x001a   200   200   000    Old_age   Always       -       0
  5 Reallocated_Sector_Ct   0x0033   100   100   000    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1060
 12 Power_Cycle_Count       0x0032   094   094   000    Old_age   Always       -       5651
169 Unknown_Attribute       0x0013   221   221   010    Pre-fail  Always       -       4222129014656
173 Wear_Leveling_Count     0x0032   198   198   100    Old_age   Always       -       30069096468
174 Host_Reads_MiB          0x0022   099   099   000    Old_age   Always       -       7219227
175 Host_Writes_MiB         0x0022   099   099   000    Old_age   Always       -       8097664
192 Power-Off_Retract_Count 0x0012   099   099   000    Old_age   Always       -       67
194 Temperature_Celsius     0x0022   077   019   000    Old_age   Always       -       23 (Min/Max 14/83)
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x001a   200   200   000    Old_age   Always       -       0

I have a couple of PNY's Elite Portable SSD drives which are not in the database yet.

These drives need '-d sat' and by default some parameters shows as unknown.

To the best of my knowledge there are phison based drives.

Attached is a patch to add the drive to the database, lsusb output and smartctl -x for the drive in question.