Custom Query (1557 matches)
Results (145 - 147 of 1557)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #1615 | fixed | Add WDC WD10JPCX-24UE4T0 to drivedb.h | ||
| Description |
WDC WD10JPCX-24UE4T0 can be recognized by changing: WDC WD(3200LPCX|5000[BL]P[CV]X|7500BPVX|10JP[VZ]X|(15|20)NPVZ)-.* to: WDC WD(3200LPCX|5000[BL]P[CV]X|7500BPVX|10JP[CVZ]X|(15|20)NPVZ)-.* |
|||
| #1675 | fixed | Add WDC WD120EFAX to drivedb | ||
| Description |
Link to specification (sorry not from WDC site - they already updated it to EFBX version): https://cdn.cs.1worldsync.com/syndication/feeds/wd/inline-content/79/FC41D42F91D9521789B0A1CBBBB0A486977F1BC5_PRODUCTBRIEFWESTERNDIGITALWDREDPLUSHDD_source.PDF smartctl7.3 output: smartctl 7.3 2022-02-28 r5338 [x86_64-w64-mingw32-w10-21H2] (sf-7.3-1)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD120EFAX-68UNTN0
Firmware Version: 81.00A81
User Capacity: 12,000,138,625,024 bytes [12.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Dec 11 12:23:26 2022 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 164 (intermediate level without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 87) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1346) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance --S--- 127 127 054 - 112
3 Spin_Up_Time POS--- 163 163 024 - 408 (Average 397)
4 Start_Stop_Count -O--C- 100 100 000 - 224
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate -O-R-- 100 100 067 - 0
8 Seek_Time_Performance --S--- 136 136 020 - 16
9 Power_On_Hours -O--C- 098 098 000 - 16532
10 Spin_Retry_Count -O--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 25
22 Unknown_Attribute PO---K 100 100 025 - 100
192 Power-Off_Retract_Count -O--CK 100 100 000 - 900
193 Load_Cycle_Count -O--C- 100 100 000 - 900
194 Temperature_Celsius -O---- 209 209 000 - 31 (Min/Max 13/53)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 256 Device Statistics log
0x04 SL R/O 255 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 5501 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x15 GPL R/W 1 Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 256 Current Device Internal Status Data log
0x25 GPL R/O 256 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 16532 -
# 2 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 23/31 Celsius
Lifetime Min/Max Temperature: 13/53 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/65 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (100)
Index Estimated Time Temperature Celsius
101 2022-12-11 10:16 44 *************************
... ..( 83 skipped). .. *************************
57 2022-12-11 11:40 44 *************************
58 2022-12-11 11:41 21 **
59 2022-12-11 11:42 22 ***
60 2022-12-11 11:43 22 ***
61 2022-12-11 11:44 23 ****
62 2022-12-11 11:45 23 ****
63 2022-12-11 11:46 24 *****
64 2022-12-11 11:47 24 *****
65 2022-12-11 11:48 25 ******
66 2022-12-11 11:49 26 *******
67 2022-12-11 11:50 26 *******
68 2022-12-11 11:51 27 ********
69 2022-12-11 11:52 27 ********
70 2022-12-11 11:53 28 *********
71 2022-12-11 11:54 28 *********
72 2022-12-11 11:55 28 *********
73 2022-12-11 11:56 29 **********
74 2022-12-11 11:57 30 ***********
... ..( 2 skipped). .. ***********
77 2022-12-11 12:00 30 ***********
78 2022-12-11 12:01 31 ************
79 2022-12-11 12:02 31 ************
80 2022-12-11 12:03 32 *************
81 2022-12-11 12:04 32 *************
82 2022-12-11 12:05 32 *************
83 2022-12-11 12:06 33 **************
84 2022-12-11 12:07 33 **************
85 2022-12-11 12:08 33 **************
86 2022-12-11 12:09 23 ****
87 2022-12-11 12:10 24 *****
88 2022-12-11 12:11 24 *****
89 2022-12-11 12:12 25 ******
90 2022-12-11 12:13 26 *******
91 2022-12-11 12:14 26 *******
92 2022-12-11 12:15 27 ********
93 2022-12-11 12:16 28 *********
94 2022-12-11 12:17 28 *********
95 2022-12-11 12:18 29 **********
96 2022-12-11 12:19 29 **********
97 2022-12-11 12:20 30 ***********
98 2022-12-11 12:21 30 ***********
99 2022-12-11 12:22 31 ************
100 2022-12-11 12:23 44 *************************
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 25 --- Lifetime Power-On Resets
0x01 0x010 4 16532 --- Power-on Hours
0x01 0x018 6 15076952077 --- Logical Sectors Written
0x01 0x020 6 41611086 --- Number of Write Commands
0x01 0x028 6 21547008600 --- Logical Sectors Read
0x01 0x030 6 123871089 --- Number of Read Commands
0x01 0x038 6 59517126050 --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 16397 --- Spindle Motor Power-on Hours
0x03 0x010 4 16397 --- Head Flying Hours
0x03 0x018 4 900 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 31 --- Current Temperature
0x05 0x010 1 43 N-- Average Short Term Temperature
0x05 0x018 1 44 N-- Average Long Term Temperature
0x05 0x020 1 53 --- Highest Temperature
0x05 0x028 1 13 --- Lowest Temperature
0x05 0x030 1 51 N-- Highest Average Short Term Temperature
0x05 0x038 1 18 N-- Lowest Average Short Term Temperature
0x05 0x040 1 48 N-- Highest Average Long Term Temperature
0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 229 --- Number of Hardware Resets
0x06 0x010 4 25 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
No Defects Logged
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
Victoria SMART info: WDC WD120EFAX-68UNTN0 ----------------------------------------------------------------------------------- ID Name Value Worst Tresh Raw Health ----------------------------------------------------------------------------------- 1 Raw read error rate 100 100 16 0 ••••• 2 Throughput perfomance 127 100 54 112 ••••• 3 Spin-up time 163 100 24 4 / 397 / 408 ••••• 4 Number of spin-up times 100 100 0 224 ••••• 5 Reallocated sector count 100 100 5 0 ••••• 7 Seek error rate 100 100 67 0 ••••• 8 Seek time perfomance 136 100 20 16 ••••• 9 Power-on time 98 98 0 16532 •••• 10 Spin-up retries 100 100 60 0 ••••• 12 Power cycle count 100 100 0 25 ••••• 22 Current HELIUM level 100 100 25 100 ••••• 189 High Fly writes 99 99 0 1 •••• 191 G-SENSOR shock counter 100 100 0 0 ••••• 192 Power Off Cycles count + Retract count 100 100 0 900 ••••• 193 Load/unload cycle count 100 100 0 900 ••••• 194 HDA Temperature 203 4 0 32°C/90°F •••• 194 Minimum temperature 90 4 0 13°C/55°F - 194 Maximum temperature 90 4 0 53°C/127°F - 196 Reallocated event count 100 100 0 0 ••••• 197 Current pending sectors 100 100 0 0 ••••• 198 Offline uncorrectable sectors count 100 100 0 0 ••••• 199 Ultra DMA CRC errors 200 200 0 0 ••••• 211 Spin running current, mA 100 100 0 123 / 32 / 353 ••••• 222 Loaded hours 98 98 0 16397 •••• 223 Load retry count 100 100 50 0 ••••• 226 Load-in time 141 140 40 150 / 147 / 2 ••••• 230 GMR head amplitude 93 93 0 18 / 12 •••• Note Victoria reports this drive as native HGST: 12:24:50 : [Attention] This WD drive - is native HGST ! |
|||
| #1676 | fixed | Add WDC WD121KFBX to drivedb | ||
| Description |
Link to specifications: https://products.wdc.com/library/SpecSheet/ENG/product-brief-wd-red-pro-hdd.pdf smartctl7.3 output: smartctl 7.3 2022-02-28 r5338 [x86_64-linux-4.14.22] (localbuild)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD121KFBX-68EF5N0
Firmware Version: 83.00A83
User Capacity: 12,000,138,625,024 bytes [12.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Dec 12 21:00:04 2022 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 164 (intermediate level without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 87) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1266) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance --S--- 132 132 054 - 96
3 Spin_Up_Time POS--- 100 100 024 - 0
4 Start_Stop_Count -O--C- 100 100 000 - 4
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate -O-R-- 100 100 067 - 0
8 Seek_Time_Performance --S--- 140 140 020 - 15
9 Power_On_Hours -O--C- 100 100 000 - 89
10 Spin_Retry_Count -O--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 3
22 Unknown_Attribute PO---K 100 100 025 - 100
192 Power-Off_Retract_Count -O--CK 100 100 000 - 8
193 Load_Cycle_Count -O--C- 100 100 000 - 8
194 Temperature_Celsius -O---- 133 133 000 - 45 (Min/Max 21/55)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 256 Device Statistics log
0x04 SL R/O 255 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 5501 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x15 GPL R/W 1 Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 256 Current Device Internal Status Data log
0x25 GPL R/O 256 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 89 -
# 2 Short offline Completed without error 00% 17 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 45 Celsius
Power Cycle Min/Max Temperature: 22/49 Celsius
Lifetime Min/Max Temperature: 21/55 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (2)
Index Estimated Time Temperature Celsius
3 2022-12-12 18:53 45 **************************
... ..(126 skipped). .. **************************
2 2022-12-12 21:00 45 **************************
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 3 --- Lifetime Power-On Resets
0x01 0x010 4 89 --- Power-on Hours
0x01 0x018 6 23440894600 --- Logical Sectors Written
0x01 0x020 6 19130295 --- Number of Write Commands
0x01 0x028 6 23486320139 --- Logical Sectors Read
0x01 0x030 6 23074433 --- Number of Read Commands
0x01 0x038 6 323651950 --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 87 --- Spindle Motor Power-on Hours
0x03 0x010 4 87 --- Head Flying Hours
0x03 0x018 4 8 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 45 --- Current Temperature
0x05 0x010 1 44 N-- Average Short Term Temperature
0x05 0x018 1 - N-- Average Long Term Temperature
0x05 0x020 1 55 --- Highest Temperature
0x05 0x028 1 21 --- Lowest Temperature
0x05 0x030 1 48 N-- Highest Average Short Term Temperature
0x05 0x038 1 25 N-- Lowest Average Short Term Temperature
0x05 0x040 1 - N-- Highest Average Long Term Temperature
0x05 0x048 1 - N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 17 --- Number of Hardware Resets
0x06 0x010 4 1 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
No Defects Logged
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
Unfortunately I didn't capture Victoria HDD Smart values before putting it into my NAS, but AFAIR those look pretty close to WD120EFAX: https://www.smartmontools.org/ticket/1675 And WD121KFBX was detected as native HGST as well. |
|||
Note:
See TracQuery
for help on using queries.
