Custom Query (1471 matches)
Results (100 - 102 of 1471)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #277 | fixed | Add OWC Mercury EXTREME Pro 6G SSD to drivedb.h | ||
| Description |
Hi. The drivedb.h contains strings to detect other OWC SSDs, but not the OWC Mercury EXTREME Pro 6G SSD. Attached is a patch to add support for the Extreme Pro 6G models. |
|||
| #1337 | fixed | Add OWC Mercury Elite Pro Quad USB ids (0x1e91:0xa4a7) | ||
| Description |
Index: drivedb.h
===================================================================
--- drivedb.h (revision 5059)
+++ drivedb.h (working copy)
@@ -5788,6 +5788,13 @@
"",
"-d sat"
},
+ // 0x1e91 (?)
+ { "USB: OWC Mercury Elite Pro Quad; ",
+ "0x1e91:0xa4a7",
+ "", // 0x0100
+ "",
+ "-d sat"
+ },
// Innostor
{ "USB: ; Innostor IS611", // USB3->SATA+PATA
"0x1f75:0x0611", // SMART access via PATA does not work
|
|||
| #1841 | fixed | Add RTL9201R based Orico enclosure to DB (0x0bda:0x9201) | ||
| Description |
Hi, I'm using Orico 9606C3 enclosure to for M.2 Sata devices. Without any options the smartctl throws an error: root@nas:/srv# smartctl -a /dev/sde smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-18-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org /dev/sde: Unknown USB bridge [0x0bda:0x9201 (0xf200)] Please specify device type with the -d option. Use smartctl -h to get a usage summary
However with root@nas:/srv# smartctl -d sat -a /dev/sde
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-18-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SPCC M.2 SSD
Serial Number: AA2022021280002432
Firmware Version: U1209A0
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5610
ATA Version is: ACS-3 T13/2161-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Sun Jun 16 22:36:51 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0
5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 425
12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 64
160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0
161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 100
163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 9
164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 152
165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 2
166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 1
167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 1
168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 5050
169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100
175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0
176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0
177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0
178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 48
194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 40
195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0
198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0
232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100
241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 2418
242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 621
245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 683
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8 -
# 2 Extended offline Completed without error 00% 7 -
# 3 Extended offline Aborted by host 10% 7 -
# 4 Extended offline Aborted by host 80% 7 -
# 5 Short offline Completed without error 00% 0 -
# 6 Short offline Aborted by host 80% 0 -
Selective Self-tests/Logging not supported
|
|||
Note:
See TracQuery
for help on using queries.
