Custom Query (1417 matches)

HP OEM Intel 320 SSDs have an H suffix in the model number, e.g. SSDSA2BW160G3H, which is currently not recognized by drivedb.h.

Changing the existing modelregexp string for Intel 320 SSDs from "INTEL SSDSA[12][BCN][WT](040|080|120|160|300|600)G3[ADL]?" to "INTEL SSDSA[12][BCN][WT](040|080|120|160|300|600)G3[ADHL]?" allows these drives to be recognized.

Tested with SSDSA2BW160G3H firmware version 4PC10365 using smartmontools 7.1 on macOS 10.15. I'm not aware whether any other unrecognized vendor suffixes exist for this model family.

I mainly work with FreeNAS systems, but I found an issue that I think can be resolved here.

I have a RocketRAID 4520 controller(latest generation from Highpoint). When I use the command smartctl -a -d hpt,1/1/1 /dev/hptiop0 I get the error "Smartctl: Device Read Identity Failed: Bad address'.

It appears that this issue was previously documented in ticket:71. That ticket was closed since nobody had this controller. I have a controller from each of the 35xx, 43xx, and 45xx family of controllers. AFAIK the only way to get any SMART data and run any tests is via the Highpoint CLI available as a binary only. My guess is that all 3 families of controller mentioned above and the 44xx will all work with the same appropriate fix.

I have a system that I can give SSH and FTP access to on request. I only have the 45xx until the end of the year however(on loan to help facilitate support for FreeNAS).

You can read additional information on this issue provided by me at the FreeNAS ticket ​https://support.freenas.org/ticket/1932.

I listed the priority as major since so many generations of cards are included with this ticket.

This adds info for the 2bay 2.5" external RAID enclosure icybox, using a Brain Actuated Technologies usb chip with id 0x1234:0x5678.

Works fine with "-d sat,12"