Custom Query (1414 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (64 - 66 of 1414)

Ticket Resolution Summary Owner Reporter
#823 fixed Add CoreRise Comay BladeDrive E28 800GB Christian Franke spacedust
Description

Please add it to the smartctl database. It's a PCI-Express SSD card.

All missing SMART parameters are attached.

smartctl 6.6 2017-03-11 r4410 [x86_64-w64-mingw32-win7-sp1] (daily-20170311)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     Comay BladeDrive E28 800GB
Serial Number:    ADDC13RHM64MPDDT2Y
LU WWN Device Id: 5 000000 361c23f9f
Firmware Version: 2.71
User Capacity:    800 241 745 920 bytes [800 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Mar 24 23:34:33 2017
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x79) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  48) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x0021) SCT Status supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0033   095   095   050    Pre-fail  Always       -       274400134
  5 Reallocated_Sector_Ct   0x0033   100   100   003    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       2608 (203 116 0)
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       43
 13 Read_Soft_Error_Rate    0x0032   095   095   000    Old_age   Always       -       274400134
100 Unknown_Attribute       0x0032   000   000   000    Old_age   Always       -       2877
170 Unknown_Attribute       0x0040   000   000   000    Old_age   Offline      -       68096
171 Unknown_Attribute       0x000a   100   100   000    Old_age   Always       -       0
172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
174 Unknown_Attribute       0x0030   000   000   000    Old_age   Offline      -       36
177 Wear_Leveling_Count     0x0000   000   000   000    Old_age   Offline      -       0
181 Program_Fail_Cnt_Total  0x000a   100   100   000    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x00b4   100   100   090    Old_age   Offline      -       0
187 Reported_Uncorrect      0x0012   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   052   052   000    Old_age   Always       -       52 (Min/Max 37/52)
195 Hardware_ECC_Recovered  0x001c   120   120   000    Old_age   Offline      -       274400134
196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always       -       0
198 Offline_Uncorrectable   0x0010   120   120   000    Old_age   Offline      -       3874060500992
199 UDMA_CRC_Error_Count    0x0090   200   200   000    Old_age   Offline      -       0
201 Unknown_SSD_Attribute   0x001c   120   120   000    Old_age   Offline      -       274400134
204 Soft_ECC_Correction     0x001c   120   120   000    Old_age   Offline      -       274400134
230 Unknown_SSD_Attribute   0x0013   100   100   000    Pre-fail  Always       -       0
231 Temperature_Celsius     0x0013   100   100   010    Pre-fail  Always       -       0
232 Available_Reservd_Space 0x0032   000   000   000    Old_age   Always       -       264
233 Media_Wearout_Indicator 0x0032   000   000   000    Old_age   Always       -       2536
234 Unknown_Attribute       0x0032   000   000   000    Old_age   Always       -       2824
235 Unknown_Attribute       0x0033   100   100   002    Pre-fail  Always       -       0
241 Total_LBAs_Written      0x0032   000   000   000    Old_age   Always       -       2824
242 Total_LBAs_Read         0x0032   000   000   000    Old_age   Always       -       3792

SMART Error Log not supported

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
#597 fixed Add Crucial BX100 to the database Christian Franke R00kie
Description

As the description implies, Crucial's BX100 SSDs are not yet on the database, the attached patch adds the needed information to the database.

The names for the attributes have been gathered from/checked against Storage Executive (SE) running on windows. I've tried to keep the naming consistent with similar names already present on the database.

The attributes that are commented have the name as shown in SE, the ones not commented have the names already present in the database, with the name from SE on the right as a comment. All attributes also have the units reported by SE.

Feel free to slice and dice the patch to keep the names consistent with the rest of the database or remove the comments to make the patch cleaner.

#192 fixed Add Crucial M4 SSD Christian Franke sfionov
Description

Crucial released updated 25nm Marvell-based SSD's at April 2011 with model ids: M4-CT(064|128|256)M4SSD2

SMART specs are the same: http://www.micron.com/get-document/?documentId=5611

Also according to the specs, attribute 181 contains three raw16 values, not one raw48.

Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.