Custom Query (1434 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (340 - 342 of 1434)

Ticket Resolution Summary Owner Reporter
#952 duplicate Drive data for Samsung-MZ7LM960HMJP-00005 Walden Leverich
#1414 fixed Drive database: Intenso SATA SSD (JAJS600M1TB) Christian Franke jonashaag
Description

This one: https://www.amazon.de/-/en/Intenso-High-Performance-Internal-SSD/dp/B01D3ACJ0M/

NB: seems to be broken after a week of use so don't buy it :)

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.18-1-MANJARO] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     JAJS600M1TB
Serial Number:    AA202000..................1
Firmware Version: T0529A0
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-3 T13/2161-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Dec 18 09:18:24 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever
					been run.
Total time to complete Offline
data collection: 		(  120) seconds.
Offline data collection
capabilities: 			 (0x11) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0002)	Does not save SMART data before
					entering power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  10) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     -O--CK   100   100   050    -    0
  5 Reallocated_Sector_Ct   -O--CK   100   100   050    -    0
  9 Power_On_Hours          -O--CK   100   100   050    -    298
 12 Power_Cycle_Count       -O--CK   100   100   050    -    9
160 Unknown_Attribute       -O--CK   100   100   050    -    0
161 Unknown_Attribute       PO--CK   100   100   050    -    100
163 Unknown_Attribute       -O--CK   100   100   050    -    24
164 Unknown_Attribute       -O--CK   100   100   050    -    2823
165 Unknown_Attribute       -O--CK   100   100   050    -    201
166 Unknown_Attribute       -O--CK   100   100   050    -    4
167 Unknown_Attribute       -O--CK   100   100   050    -    14
168 Unknown_Attribute       -O--CK   100   100   050    -    2000
169 Unknown_Attribute       -O--CK   100   100   050    -    100
175 Program_Fail_Count_Chip -O--CK   100   100   050    -    0
176 Erase_Fail_Count_Chip   -O--CK   100   100   050    -    0
177 Wear_Leveling_Count     -O--CK   100   100   050    -    0
178 Used_Rsvd_Blk_Cnt_Chip  -O--CK   100   100   050    -    0
181 Program_Fail_Cnt_Total  -O--CK   100   100   050    -    0
182 Erase_Fail_Count_Total  -O--CK   100   100   050    -    0
192 Power-Off_Retract_Count -O--CK   100   100   050    -    8
194 Temperature_Celsius     -O---K   100   100   050    -    30
195 Hardware_ECC_Recovered  -O--CK   100   100   050    -    0
196 Reallocated_Event_Count -O--CK   100   100   050    -    0
197 Current_Pending_Sector  -O--CK   100   100   050    -    0
198 Offline_Uncorrectable   -O--CK   100   100   050    -    0
199 UDMA_CRC_Error_Count    -O--CK   100   100   050    -    16
232 Available_Reservd_Space -O--CK   100   100   050    -    100
241 Total_LBAs_Written      ----CK   100   100   050    -    56938
242 Total_LBAs_Read         ----CK   100   100   050    -    189911
245 Unknown_Attribute       -O--CK   100   100   050    -    298890
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      1  Comprehensive SMART error log
0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x24       GPL     R/O     88  Current Device Internal Status Data log
0x25       GPL     R/O     32  Saved Device Internal Status Data log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 17 (device log contains only the most recent 4 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 17 [0] log entry is empty
Error 16 [3] log entry is empty
Error 15 [2] log entry is empty
Error 14 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  00 -- 00 00 00 00 00 00 00 00 00 00 00

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  b0 00 da 00 00 00 00 4f 00 c2 00 00 08     00:00:00.000  SMART RETURN STATUS
  ec 00 00 01 01 00 00 00 00 00 00 00 08     00:00:00.000  IDENTIFY DEVICE
  b0 00 d5 01 01 00 00 4f 00 c2 06 00 08     00:00:00.000  SMART READ LOG
  b0 00 d5 01 01 00 00 4f 00 c2 01 00 08     00:00:00.000  SMART READ LOG
  b0 00 d5 01 01 00 00 4f 00 c2 00 00 08     00:00:00.000  SMART READ LOG

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%       298         -

Selective Self-tests/Logging not supported

SCT Commands not supported

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4               9  ---  Lifetime Power-On Resets
0x01  0x010  4             298  ---  Power-on Hours
0x01  0x018  6      3731543014  ---  Logical Sectors Written
0x01  0x020  6         4571944  ---  Number of Write Commands
0x01  0x028  6      3856111046  ---  Logical Sectors Read
0x01  0x030  6        77424900  ---  Number of Read Commands
0x07  =====  =               =  ===  == Solid State Device Statistics (rev 1) ==
0x07  0x008  1               0  ---  Percentage Used Endurance Indicator
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  4            0  Command failed due to ICRC error
0x0002  4            0  R_ERR response for data FIS
0x0005  4            0  R_ERR response for non-data FIS
0x000a  4            2  Device-to-host register FISes sent due to a COMRESET

#263 invalid Drive does not support SMART, but health check shows 'Ok' somebody telsonalva
Description

Why would smartctl show the SMART Health status as 'ok' when the device does not support SMART ? Below is output of the commands.


smartctl -H /dev/sda


smartctl 6.0 2012-10-10 r3643 [i686-w64-mingw32-2003r2-sp2] (sf-6.0-1) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

SMART Health Status: OK


smartctl -a /dev/sda


smartctl 6.0 2012-10-10 r3643 [i686-w64-mingw32-2003r2-sp2] (sf-6.0-1) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

Vendor: PERC Product: LD 0 PERCRAID Revision: User Capacity: 36,364,615,680 bytes [36.3 GB] Logical block size: 512 bytes Serial number: 021400000000 Device type: disk Local Time is: Tue Mar 12 00:33:22 2013 CDT Device does not support SMART

Error Counter logging not supported Device does not support Self Test logging


smartctl -i /dev/sda


smartctl 6.0 2012-10-10 r3643 [i686-w64-mingw32-2003r2-sp2] (sf-6.0-1) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

Vendor: PERC Product: LD 0 PERCRAID Revision: User Capacity: 36,364,615,680 bytes [36.3 GB] Logical block size: 512 bytes Serial number: 021400000000 Device type: disk Local Time is: Tue Mar 12 00:33:22 2013 CDT Device does not support SMART


smartctl -s on -d scsi /dev/sda


smartctl 6.0 2012-10-10 r3643 [i686-w64-mingw32-2003r2-sp2] (sf-6.0-1) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

unable to fetch IEC (SMART) mode page [Input/output error] A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.


smartctl -d test /dev/sda


smartctl 6.0 2012-10-10 r3643 [i686-w64-mingw32-2003r2-sp2] (sf-6.0-1) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/sda: Device of type 'scsi' [SCSI] detected /dev/sda: Device of type 'scsi' [SCSI] opened

Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.