Custom Query (1406 matches)
Results (1 - 3 of 1406)
Ticket | Resolution | Summary | Owner | Reporter |
---|---|---|---|---|
#685 | fixed | "How to create bug report" FAQ mentions sourceforge account | ||
Description |
The paragraph on creating a new Trac ticket found at https://www.smartmontools.org/wiki/FAQ#Howtocreateabugreport includes the sentence "You have to be logged in with a sourceforge account to do that." Presumably this should now say something like "You must be logged in to your smartmontools.org Trac account in order to do that." |
|||
#680 | wontfix | "LifeTime(hours)" wrap around in SMART's self-test log | ||
Description |
Hi I've just seen that on a few quite old disks, the 16bit counter for "LifeTime(hours)" wraps around after a few years, even though the power on hours don't. I'm not sure if this is caused the SMART specs or a problem with querying the raw values within smartmontools, but it would be nice to have a fix in smartmontools to have a uniformly growing number of LifeTime in the logs - especially as we use the difference between the latest entry and attribute no 9 to determine if a regular check was not performed. What do you think? Cheers Carsten smartctl 6.5 2016-04-02 r4276 [x86_64-linux-3.18.26-atlas] (daily-20160402) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Ultrastar A7K1000 Device Model: Hitachi HUA721075KLA330 Serial Number: GTE200P8G1Z07E LU WWN Device Id: 5 000cca 215c0e504 Firmware Version: GK8OA70M User Capacity: 750,156,374,016 bytes [750 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 Local Time is: Mon Apr 4 13:07:04 2016 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: (11471) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 191) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 130 130 054 Pre-fail Offline - 151 3 Spin_Up_Time 0x0007 118 118 024 Pre-fail Always - 542 (Average 472) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 82 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 2 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 132 132 020 Pre-fail Offline - 33 9 Power_On_Hours 0x0012 091 091 000 Old_age Always - 66329 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 82 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 868 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 868 194 Temperature_Celsius 0x0002 166 166 000 Old_age Always - 36 (Min/Max 8/47) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 676 - # 2 Extended offline Completed without error 00% 508 - # 3 Extended offline Completed without error 00% 340 - # 4 Extended offline Completed without error 00% 172 - # 5 Extended offline Completed without error 00% 4 - # 6 Extended offline Completed without error 00% 65372 - # 7 Extended offline Completed without error 00% 65205 - # 8 Extended offline Completed without error 00% 64868 - # 9 Extended offline Completed without error 00% 64700 - #10 Extended offline Completed without error 00% 64532 - #11 Extended offline Completed without error 00% 64484 - #12 Extended offline Completed without error 00% 12930 - #13 Extended offline Completed without error 00% 12762 - #14 Extended offline Completed without error 00% 12594 - #15 Extended offline Completed without error 00% 12426 - #16 Extended offline Completed without error 00% 12258 - #17 Extended offline Completed without error 00% 12090 - #18 Extended offline Completed without error 00% 11922 - #19 Extended offline Completed without error 00% 11754 - #20 Extended offline Completed without error 00% 11586 - #21 Extended offline Completed without error 00% 11418 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. |
|||
#1693 | invalid | "SMART support is:" missing | ||
Description |
Hello, I am using version 7.3 version of smartmontools on Leap 15.4. I have ran "update-smart-drivedb" after installation. I have 2 HDDs and 1 NVMe SSD CT250P2SSD8, which seems to be supported. When I run "smartctl -a /dev/nvme0" or "smartctl -i /dev/nvme0n1" there is no mention of the two "SMART support is:" lines. |