Custom Query (1365 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:

Results (190 - 192 of 1365)

← 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 →
Ticket Resolution Summary Owner Reporter
#1272 duplicate Missing SMART data from hpsa SAS devices (HP EG0900FBLSK) Dustin Marquess
Description

NEW

$ sudo ./smartctl -x -d scsi+cciss,0 -r ioctl /dev/sg0                                                    <
smartctl 7.1 2019-12-13 r5004 [x86_64-linux-4.18.13-geo1.ol6.x86_64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
=== START OF INFORMATION SECTION ===
Vendor:               HP
Product:              EG0900FBLSK
Revision:             HPD8
Compliance:           SPC-3
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
User Capacity:        900,185,481,216 bytes [900 GB]
Logical block size:   512 bytes
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Rotation Rate:        10000 rpm
Form Factor:          2.5 inches
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Logical Unit id:      0x5000c5004bc2745b
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Serial number:        6XS22P5S0000B235E1D7
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Fri Dec 20 14:21:58 2019 PST
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
SMART Health Status: OK
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Elements in grown defect list: 0

Error Counter logging not supported

  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Device does not support Self Test logging
Device does not support Background scan results logging

OLD

smartctl 5.43 2016-09-28 r4347 [x86_64-linux-4.18.13-geo1.ol6.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
/dev/sg0 [cciss_disk_00] [SCSI]: Device open changed type from 'sat,auto' to 'cciss'
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Vendor:               HP
Product:              EG0900FBLSK
Revision:             HPD8
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
User Capacity:        900,185,481,216 bytes [900 GB]
Logical block size:   512 bytes
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Logical Unit id:      0x5000c5004bc2745b
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Serial number:        6XS22P5S0000B235E1D7
Device type:          disk
Transport protocol:   SAS
Local Time is:        Fri Dec 20 14:25:23 2019 PST
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Device supports SMART and is Enabled
Temperature Warning Enabled
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
SMART Health Status: OK

  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Current Drive Temperature:     21 C
Drive Trip Temperature:        65 C
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Manufactured in week 10 of year 2012
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  60
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  1513
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Elements in grown defect list: 0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Vendor (Seagate) cache information
  Blocks sent to initiator = 773829256
  Blocks received from initiator = 4244589878
  Blocks read from cache and sent to initiator = 4231434536
  Number of read and write commands whose size <= segment size = 3949760769
  Number of read and write commands whose size > segment size = 39300
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 60047.63
  number of minutes until next internal SMART test = 59
Vendor (Seagate/Hitachi) factory lpage: unknown parameter code [0x9]
Vendor (Seagate/Hitachi) factory lpage: unknown parameter code [0xe]
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0        0         0  782369620          0    4012475.671           0
write:         0        0         0         0          0      28874.763           0
verify:        0        0         0  3275645858          0        476.546           0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0

Non-medium error count:      162
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -       0                 - [-   -    -]

  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Long (extended) Self Test duration: 7250 seconds [120.8 minutes]
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0

Background scan results log
  Status: scan is active
    Accumulated power on time, hours:minutes 60047:38 [3602858 minutes]
    Number of background scans performed: 2229,  scan progress: 2.06%
    Number of background medium scans performed: 2229
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
  cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
  status=0
Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: end device
    attached reason: unknown
    reason: hard reset
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=1 stp=1 smp=1
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000c5004bc27459
    attached SAS address = 0x5001438010eef5e0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 18
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 18
     Phy reset problem count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; 1.5 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000c5004bc2745a
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 0
     Phy reset problem count: 0
#1279 duplicate update-smart-drivedb: Older releases return *** BAD signature *** Stanislav Brabec
Description

When calling update-smart-drivedb from smartmontools-6.6, it always fails: /usr/sbin/update-smart-drivedb: /usr/share/smartmontools/drivedb.h.error.raw: * BAD signature *

It currently affectects version 6.6, but starting with year 2021, it will affect 7.0 and 7.1 as well.

Digging deeper into this problem by sh -x, I see: ++ gpg --quiet --no-secmem-warnin --batch --no-tty --homedir=/usr/share/smartmontools/.gnupg.12981.tmp --verify /usr/share/smartmontools/drivedb.h.new.raw.asc /usr/share/smartmontools/drivedb.h.new.raw + out='gpg: Signature made Sat Dec 28 22:44:15 2019 CET gpg: using RSA key EA74AB25721042C5 gpg: Can'\t check signature: No public key' + rc=1

There is a problem:

smartmontools-6.6 hardcodes requirement of "Smartmontools Signing Key (through 2018)". But drivedb.h.raw.asc in the branch RELEASE_6_6_DRIVEDB is signed by "Smartmontools Signing Key (through 2020)". This cannot work.

drivedb.h.raw.asc in the branch RELEASE_6_6_DRIVEDB has to use "Smartmontools Signing Key (through 2018)" forever. You have to extend validity period of this signing key, and then use that key for signing of this branch.

Similarly, once RELEASE_7_0_DRIVEDB will be created, it has to be signed by "Smartmontools Signing Key (through 2020)" forever. And if it will not be created, you will go into unfixable problems in 2021 (version 7.0 will require a different signature than a future 7.3).

In general, replacement of signing key every two years is not smart. It does not increase security, but paradoxically it decreases the security. New signing key has no trusted developer signatures, no trusted ring, so there are no way to verify that the key was created by legitimate developers.

That is why I recommend to stop creating new keys every two years. Please create a well established trusted key, and when it will be required (e. g. signature considered as weak), add a signature to it. Developers should sign this key by their private keys, so people who have them in the trust ring could immediately trust this key.

To decrease problems with future compatibility (e. g. extended key validity period, added signature), the script should update the key from the GPG network: gpg --recv-keys {key_id}

This will also ensure security, as the possibly revoked key will be refused.

#1286 duplicate Not in smartctl database: Seagate Barracuda 3.5" [ST2000DM008] v6f9
Description

Output for 'smartctl -x /dev/sdX' is attached.

← 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 →
Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.