Custom Query (1383 matches)
Results (73 - 75 of 1383)
Ticket | Resolution | Summary | Owner | Reporter |
---|---|---|---|---|
#1488 | worksforme | JMicron 152d:0578 USB 3.0 Bridge needs -d sat | ||
Description |
Similarly to item #338 (ticket) I have an Orico USB 3.0 SATA enclosure that has a JMicron chipset. This ID is listed in drivedb.h but it is not useable with -d usbjmicron (failed: No device connected) It works fine with -d sat. I believe this is already fixed in the latest release, but when I do an update-smart-drivedb, my 6.6 smartmontools will normally not get that updated drive information. |
|||
#1489 | worksforme | Database: Please add WD My Passport 2627 (WDC WD50NDZW-11A8JS1) | ||
Description |
WD My Passport 2627 - 5 TB Portable HDD (actually 4657 GB) Model No. on packaging: WDPBKJ0050BBK-WESN Model No. on casing: WDPBKJ0050BBK-0A Model No. of HDD inside according to smartctl: WD50NDZW-11A8JS1 Manufacturer Support Page: https://support-en.wd.com/app/products/product-detail/p/1539#WD_specifications # smartctl -t short /dev/sdb smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-15-amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org /dev/sdb: Unknown USB bridge [0x1058:0x2627 (0x4008)] Please specify device type with the -d option. Use smartctl -h to get a usage summary # smartctl -d sat -t short /dev/sdb smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-15-amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Short self-test routine immediately in off-line mode". Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 2 minutes for test to complete. Test will complete after Sun May 16 23:13:07 2021 Use smartctl -X to abort test. # smartctl -d sat -l selftest /dev/sdb smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-15-amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 34 - See attachment for full smartmontools report # hwinfo --disk 29: SCSI 200.0: 10600 Disk [Created at block.245] Unique ID: UfPf._7MyyJ0Am51 Parent ID: 37TO.zys4AvoZH73 SysFS ID: /class/block/sdb SysFS BusID: 2:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1:1.0/host2/target2:0:0/2:0:0:0 Hardware Class: disk Model: "WD My Passport 2627" Vendor: usb 0x1058 "WD" Device: usb 0x2627 "My Passport 2627" Revision: "4008" Serial ID: "WX92D905HP3H" Driver: "usb-storage", "sd" Driver Modules: "usb_storage", "sd_mod" Device File: /dev/sdb (/dev/sg2) Device Files: /dev/sdb, /dev/disk/by-id/usb-WD_My_Passport_2627_575839324439303548503348-0:0, /dev/disk/by-path/pci-0000:00:10.0-usb-0:1:1.0-scsi-0:0:0:0 Device Number: block 8:16-8:31 (char 21:2) Geometry (Logical): CHS 607997/255/63 Size: 9767475200 sectors a 512 bytes Capacity: 4657 GB (5000947302400 bytes) Module Alias: "usb:v1058p2627d4008dc00dsc00dp00ic08isc06ip50in00" Driver Info #0: Driver Status: uas is active Driver Activation Cmd: "modprobe uas" Driver Info #1: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #23 (USB Controller) # lsusb -d 1058:2627 -v Bus 005 Device 002: ID 1058:2627 Western Digital Technologies, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x1058 Western Digital Technologies, Inc. idProduct 0x2627 bcdDevice 40.08 iManufacturer 2 Western Digital iProduct 3 My Passport 2627 iSerial 1 575839324439303548503348 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 44 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 224mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 22 bNumDeviceCaps 2 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x0000f41e Link Power Management (LPM) Supported SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 10 micro seconds bU2DevExitLat 2047 micro seconds Device Status: 0x0000 (Bus Powered) |
|||
#1562 | worksforme | Samsung PM1643a truncated SMART on smartctl versions after 6.6 | ||
Description |
Hi, We have brand new SSD: SAMSUNG MZILT3T8HBLS/007 PM1643a SAS After smartctl version 6.6 (tested 7.0 and 7.2), most of the SMART informations are no longer displayed, watching diff this is missing: - Percentage used endurance indicator - Accumulated start-stop cycles: 2 - Specified load-unload count over device lifetime: 0 - Accumulated load-unload cycles: 0 ... -Error counter log: - Errors Corrected by Total Correction Gigabytes Total - ECC rereads/ errors algorithm processed uncorrected - fast | delayed rewrites corrected invocations [10^9 bytes] errors -read: 0 0 0 0 0 1857.755 0 -write: 0 0 0 0 0 2817.675 0 -Non-medium error count: 0 - -No self-tests have been logged I saw similar ticket #1239 , but no luck with this SSD on version: smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.3-STABLE amd64] (local build) OS: FreeBSD 12.3-STABLE #0 r371457M Attached the output of the following commands, for both version 6.6 and 7.2: smartctl -x /dev/da12 (da12_smartctl_6.6_-x and da12_smartctl_7.2_-x) smartctl -x /dev/da12 -r ioctl,2 (da12_smartctl_6.6_-x_-r_ioctl2 and da12_smartctl_7.2_-x_-r_ioctl2) Please inform if you need more details or to try patches. Thank you! |