Custom Query (1566 matches)
Results (433 - 435 of 1566)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #626 | invalid | Intel® SSD 520 Series + smartctl -t long | ||
| Description |
Why does the smart test in Linux lasts 5-6 hours instead of 48 minutes? Use command: smartctl -t long /dev/sda The test is passed by drive. But why is so long? (freebsd 8.4, Ubuntu 14.04). Speed is ok, about 400-450 kbytes/sec. Short test is ok, about 1-1,5 min. Firmware Version: 400i, [240 GB] Capacity, Sata current: 6.0 Gb/s attach for you log smartctl , why so many in log lines, it's a bug? there is one Self-test routine in progress gonna be i suppose : # 1 Extended offline Self-test routine in progress 40% 16923 -
....
#19 Extended offline Self-test routine in progress 40% 16924 -
fstrim -v /mnt
/mnt: 236092682240 bytes were trimmed
smartctl -x /dev/sda
smartctl 6.5 2015-12-19 r4193 [x86_64-linux-3.16.0-46-generic] (daily-20151219)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Intel 520 Series SSDs
Device Model: INTEL SSDSC2CW240A3
Serial Number: CVCV2495000A240CGN
LU WWN Device Id: 5 001517 803d11a4a
Firmware Version: 400i
User Capacity: 240,057,409,536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Dec 22 11:29:49 2015 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x03) Offline data collection activity
is in progress.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 244) Self-test routine in progress...
40% of test remaining.
Total time to complete Offline
data collection: ( 1877) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 911718h+07m+41.930s
12 Power_Cycle_Count -O--CK 100 100 000 - 13
170 Available_Reservd_Space PO--CK 100 100 010 - 0
171 Program_Fail_Count -O--CK 100 100 000 - 0
172 Erase_Fail_Count -O--CK 100 100 000 - 0
174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 13
184 End-to-End_Error PO--CK 100 100 090 - 0
187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 13
225 Host_Writes_32MiB -O--CK 100 100 000 - 16152107
226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535
227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 23
228 Workload_Minutes -O--CK 100 100 000 - 65535
232 Available_Reservd_Space PO--CK 100 100 010 - 0
233 Media_Wearout_Indicator -O--CK 089 089 000 - 0
241 Host_Writes_32MiB -O--CK 100 100 000 - 16152107
242 Host_Reads_32MiB -O--CK 100 100 000 - 4829664
249 NAND_Writes_1GiB PO--C- 100 100 000 - 160487
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x04 GPL,SL R/O 1 Device Statistics log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xb7 GPL,SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Self-test routine in progress 40% 16923 -
# 2 Extended offline Self-test routine in progress 40% 16923 -
# 3 Extended offline Self-test routine in progress 40% 16923 -
# 4 Extended offline Self-test routine in progress 40% 16923 -
# 5 Extended offline Self-test routine in progress 40% 16923 -
# 6 Extended offline Self-test routine in progress 40% 16923 -
# 7 Extended offline Self-test routine in progress 40% 16923 -
# 8 Extended offline Self-test routine in progress 40% 16923 -
# 9 Extended offline Self-test routine in progress 40% 16923 -
#10 Extended offline Self-test routine in progress 40% 16923 -
#11 Extended offline Self-test routine in progress 40% 16923 -
#12 Extended offline Self-test routine in progress 40% 16923 -
#13 Extended offline Self-test routine in progress 40% 16923 -
#14 Extended offline Self-test routine in progress 40% 16923 -
#15 Extended offline Self-test routine in progress 40% 16923 -
#16 Extended offline Self-test routine in progress 40% 16923 -
#17 Extended offline Self-test routine in progress 40% 16923 -
#18 Extended offline Self-test routine in progress 40% 16923 -
#19 Extended offline Self-test routine in progress 40% 16924 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 30/30 Celsius
Lifetime Min/Max Temperature: 30/30 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 0 (Unknown, should be 2)
Temperature Sampling Period: 0 minutes
Temperature Logging Interval: 0 minutes
Min/Max recommended Temperature: 0/ 0 Celsius
Min/Max Temperature Limit: 0/ 0 Celsius
Temperature History Size (Index): 0 (0)
Temperature History is empty
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 20 --- Lifetime Power-On Resets
0x01 0x010 4 16924 --- Power-on Hours
0x01 0x018 6 1058752031001 --- Logical Sectors Written
0x01 0x028 6 316701686909 --- Logical Sectors Read
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 245 --- Resets Between Cmd Acceptance and Completion
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 245 --- Number of Hardware Resets
0x06 0x010 4 234 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 255 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 10 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x0002 2 0 R_ERR response for data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|||
| #629 | invalid | Intel SSD DC S3500 detected as SATA 2.6 compliant | ||
| Description |
Maybe there is no problem, but my Intel SSD DC S3500 is detected by smartctl as a SATA 2.6 compliant SSD. The PDF specification says it's a SATA 3.0 SSD, so I don't know who is actually right. http://www.intel.com/content/www/us/en/solid-state-drives/ssd-dc-s3500-spec.html Does anyone can confirm smartctl is right or not? I plugged the SSD in 2 different computers (chipset Intel B150 and B85). |
|||
| #630 | invalid | how to configure amazon aws mail server to send smartd alerts | ||
| Description |
Hi, I want to setup amazon aws mail server as the mail configuration for smartd. Is it possible? if yes what are the steps involved in achieving so? Thanks in advance! |
|||
Note:
See TracQuery
for help on using queries.
