Custom Query (1562 matches)

This is possibly related to tickets 46, 140, 197. I am prepared to provide followup and debugging info. Email on cc list is fastest way to get my attention.

Just compiled smartmontools 5.42 on CentOS 5.6, on a SuperMicro blade server with the LSI 2108 MegaRAID type raid controller.

[root@36d sbin]# ./smartctl -a -d megaraid,0 -T permissive /dev/sg0 smartctl 5.42 2011-10-20 r3458 [x86_64-linux-2.6.18-238.el5] (local build) Copyright (C) 2002-11 by Bruce Allen, ​http://smartmontools.sourceforge.net

Smartctl open device: /dev/sg0 [megaraid_disk_00] failed: INQUIRY failed

I've tried megaraid,N for N=1 to 32; saw notes that some devices start enumerating at 8 and tried that additionally, iterated through with /dev/sg0 /dev/sg1. No good.

Not sure if this is an underlying bug or user error on my part, but I have tried everything I am aware of and have found on the net so far without success.

Additional info:

[root@36d sbin]# lsscsi -g [0:2:0:0] disk LSI AOC-USAS2LP-H8iR 2.40 /dev/sda /dev/sg0 [0:2:1:0] disk LSI AOC-USAS2LP-H8iR 2.40 /dev/sdb /dev/sg1 [0:2:5:0] disk LSI AOC-USAS2LP-H8iR 2.40 /dev/sdg /dev/sg5

[root@36d sbin]# /opt/MegaRAID/MegaCli/MegaCli64 -AdpAllInfo -a0 Adapter #0

==============================================================================

Versions

================

Product Name : LSI MegaRAID SAS PCI Express ROMB Serial No : FW Package Build: 12.4.0-0012

Mfg. Data

================

Mfg. Date : 00/00/00 Rework Date : 00/00/00 Revision No : Battery FRU : N/A

Image Versions in Flash: ================

BIOS Version : 3.10.00 FW Version : 2.40.03-0787 Preboot CLI Version: 04.03-002:#%00008 WebBIOS Version : 6.0-3-e_0-Rel NVDATA Version : 2.03.0047 Boot Block Version : 2.02.00.00-0000 BOOT Version : 01.250.04.219

Pending Images in Flash ================

None

PCI Info ================

Vendor Id : 1000 Device Id : 0079 SubVendorId : 15d9 SubDeviceId : 0700

Host Interface : PCIE

Number of Frontend Port: 0 Device Interface : PCIE

Number of Backend Port: 8 Port : Address 0 50014ee30009d246 1 4433221105000000 2 4433221104000000 3 0000000000000000 4 50014ee30009d08e 5 0000000000000000 6 0000000000000000 7 0000000000000000

HW Configuration ================

SAS Address : 500304800088aaa0 BBU : Absent Alarm : Present NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 512MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Absent Temperature sensor for controller : Absent

Settings ================

Current Time : 3:51:7 11/23, 2011 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 2 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : 1GB Cluster Mode : Disabled Alarm : Enabled Auto Rebuild : Enabled Battery Warning : Disabled Ecc Bucket Size : 15 Ecc Bucket Leak Rate : 1440 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Enabled Maintain PD Fail History : Disabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : No Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 0 Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No

Capabilities ================

RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA

Allowed Mixing:

Mix in Enclosure Allowed Mix of SAS/SATA of HDD type in VD Allowed Mix of SAS/SATA of SSD type in VD Allowed Mix of SSD/HDD in VD Allowed

Status ================

ECC Bucket Count : 0

Limitations ================

Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 1008 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 8 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 0 MB

Device Present ================

Virtual Drives : 2

Degraded : 0 Offline : 0

Physical Devices : 5

Disks : 4 Critical Disks : 0 Failed Disks : 0

Supported Adapter Operations ================

Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : Yes Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : No Support PI : No Support Boot Time PFK Change : No Disable Online PFK Change : No Support Shield State : No Block SSD Write Disk Cache Change: No

Supported VD Operations ================

Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : Yes Support Breakmirror : No Power Savings : No

Supported PD Operations ================

Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : No Disable Copyback : No Enable JBOD : No Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : Yes Disable Spin Down of hot spares : No Spin Down time : 30 T10 Power State : No

Error Counters ================

Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0

Cluster Information ================

Cluster Permitted : No Cluster Active : No

Default Settings ================

Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Enabled Cached IO : Yes SMART Mode : Mode 6 Alarm Disable : Yes Coercion Mode : 1GB ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : No Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : Yes Allow SSD SAS/SATA Mix in VD : Yes Allow HDD/SSD Mix in VD : Yes Allow SATA in Cluster : No Max Chained Enclosures : 16 Disable Ctrl-R : Yes Enable Web BIOS : Yes Direct PD Mapping : No BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : Yes Maintain PD Fail History : No Disable Puncturing : No Zero Based Enclosure Enumeration : No PreBoot CLI Enabled : Yes LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : No Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : Yes Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : No Max LD per array : 16 Power Saving option : All power saving options are enabled Default spin down time in minutes: 30 Enable JBOD : No TTY Log In Flash : No Auto Enhanced Import : No BreakMirror RAID Support : No Disable Join Mirror : No Enable Shield State : No Time taken to detect CME : 60s

Exit Code: 0x00

I can't enable SMART on this drive. -s option, suggested by the output (see below) doesn't help.

$sudo /usr/local/sbin/smartctl -a /dev/ad4 smartctl 5.42 2011-10-20 r3458 [FreeBSD 8.2-STABLE amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, ​http://smartmontools.sourceforge.net

START OF INFORMATION SECTION

Model Family: Western Digital Caviar Green (Adv. Format) Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WCAZA0719722 Firmware Version: 0909 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Dec 6 00:06:45 2011 PST SMART support is: Available - device has SMART capability. SMART support is: Disabled

SMART Disabled. Use option -s with argument 'on' to enable it.

Every time I use smartctl I get these on /var/messages:

Mar 4 14:19:48 openindiana scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,1c1c@1c,6/pci12d8,e111@0/pci1095,7124@0/disk@2,0 (sd3): Mar 4 14:19:48 openindiana Error for Command: <undecoded cmd 0xa1> Error Level: Recovered Mar 4 14:19:48 openindiana scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0 Mar 4 14:19:48 openindiana scsi: [ID 107833 kern.notice] Vendor: ATA Serial Number: Mar 4 14:19:48 openindiana scsi: [ID 107833 kern.notice] Sense Key: Soft_Error Mar 4 14:19:48 openindiana scsi: [ID 107833 kern.notice] ASC: 0x0 (no additional sense info), ASCQ: 0x0, FRU: 0x0

Still, smartctl works ok.