Custom Query (1406 matches)
Results (208 - 210 of 1406)
Ticket | Resolution | Summary | Owner | Reporter |
---|---|---|---|---|
#348 | fixed | Add support for Transcend SSD TS256GSSD340 | ||
Description |
The drive is not recognized with the latest drivedb.h. I am providing the current smartctl output: # smartctl -x /dev/sda smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.11.10-21-desktop] (SUSE RPM) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TS256GSSD340 Serial Number: 20140513B4304788622A LU WWN Device Id: 5 000000 000000000 Firmware Version: SVN423b User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 3.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Aug 20 13:56:04 2014 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 32) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 1) minutes. SCT capabilities: (0x0039) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--- 100 100 050 - 0 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 9 Power_On_Hours -O--C- 100 100 000 - 14 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 12 Power_Cycle_Count -O--C- 100 100 000 - 15 167 Unknown_Attribute -O---K 100 100 000 - 0 169 Unknown_Attribute PO--C- 100 100 010 - 3211264 170 Unknown_Attribute PO--C- 100 100 010 - 0 173 Unknown_Attribute -O--C- 199 199 000 - 4295163905 175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 192 Power-Off_Retract_Count -O--C- 100 100 000 - 4 194 Temperature_Celsius -O---K 062 062 030 - 38 (Min/Max 37/50) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 233 Media_Wearout_Indicator -O--CK 100 100 000 - 41291776 234 Unknown_Attribute -O--CK 100 100 000 - 15104384 240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 241 Total_LBAs_Written -O--CK 100 100 000 - 27956764 242 Total_LBAs_Read -O--CK 100 100 000 - 3035910 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 0 Device State: Active (0) Current Temperature: 0 Celsius Power Cycle Max Temperature: 0 Celsius Lifetime Max Temperature: 0 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -127/127 Celsius Min/Max Temperature Limit: -127/127 Celsius Temperature History Size (Index): 478 (145) Index Estimated Time Temperature Celsius 146 2014-08-20 05:59 ? - ... ..(331 skipped). .. - 0 2014-08-20 11:31 ? - 1 2014-08-20 11:32 48 ***************************** 2 2014-08-20 11:33 48 ***************************** 3 2014-08-20 11:34 48 ***************************** 4 2014-08-20 11:35 ? - 5 2014-08-20 11:36 ? - 6 2014-08-20 11:37 50 ******************************* 7 2014-08-20 11:38 49 ****************************** 8 2014-08-20 11:39 48 ***************************** ... ..( 26 skipped). .. ***************************** 35 2014-08-20 12:06 48 ***************************** 36 2014-08-20 12:07 49 ****************************** ... ..( 8 skipped). .. ****************************** 45 2014-08-20 12:16 49 ****************************** 46 2014-08-20 12:17 50 ******************************* 47 2014-08-20 12:18 50 ******************************* 48 2014-08-20 12:19 50 ******************************* 49 2014-08-20 12:20 49 ****************************** 50 2014-08-20 12:21 50 ******************************* ... ..( 2 skipped). .. ******************************* 53 2014-08-20 12:24 50 ******************************* 54 2014-08-20 12:25 49 ****************************** 55 2014-08-20 12:26 50 ******************************* 56 2014-08-20 12:27 49 ****************************** 57 2014-08-20 12:28 49 ****************************** 58 2014-08-20 12:29 50 ******************************* 59 2014-08-20 12:30 50 ******************************* 60 2014-08-20 12:31 50 ******************************* 61 2014-08-20 12:32 49 ****************************** 62 2014-08-20 12:33 50 ******************************* 63 2014-08-20 12:34 43 ************************ 64 2014-08-20 12:35 43 ************************ 65 2014-08-20 12:36 40 ********************* ... ..( 2 skipped). .. ********************* 68 2014-08-20 12:39 40 ********************* 69 2014-08-20 12:40 39 ******************** 70 2014-08-20 12:41 38 ******************* ... ..( 3 skipped). .. ******************* 74 2014-08-20 12:45 38 ******************* 75 2014-08-20 12:46 37 ****************** ... ..( 4 skipped). .. ****************** 80 2014-08-20 12:51 37 ****************** 81 2014-08-20 12:52 38 ******************* 82 2014-08-20 12:53 37 ****************** 83 2014-08-20 12:54 37 ****************** 84 2014-08-20 12:55 38 ******************* ... ..( 19 skipped). .. ******************* 104 2014-08-20 13:15 38 ******************* 105 2014-08-20 13:16 39 ******************** 106 2014-08-20 13:17 39 ******************** 107 2014-08-20 13:18 38 ******************* ... ..( 22 skipped). .. ******************* 130 2014-08-20 13:41 38 ******************* 131 2014-08-20 13:42 37 ****************** 132 2014-08-20 13:43 38 ******************* 133 2014-08-20 13:44 38 ******************* 134 2014-08-20 13:45 38 ******************* 135 2014-08-20 13:46 37 ****************** 136 2014-08-20 13:47 38 ******************* 137 2014-08-20 13:48 37 ****************** 138 2014-08-20 13:49 38 ******************* ... ..( 6 skipped). .. ******************* 145 2014-08-20 13:56 38 ******************* SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Description 1 ===== = = == General Statistics (rev 2) == 1 0x008 4 15 Lifetime Power-On Resets 1 0x018 6 27935652 Logical Sectors Written 1 0x020 6 73142 Number of Write Commands 1 0x028 6 3035910 Logical Sectors Read 1 0x030 6 81551 Number of Read Commands 1 0x038 6 50400000 Date and Time TimeStamp 7 ===== = = == Solid State Device Statistics (rev 1) == 7 0x008 1 0~ Percentage Used Endurance Indicator |_ ~ normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 4 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 41 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC |
|||
#349 | fixed | Add SanDisk X300s and Apacer 4GB SLC to the drivedb | ||
Description |
Please, could you add the following devices in drivedb: |
|||
#435 | fixed | Windows 7 Full Install - Error in PATH variable | ||
Description |
When installing via the "Full" option on Windows 7, the PATH variable is not being set correctly. It must be added with quotes around it. Spaces will cause the entire variable to be ignored. Incorrect: C:\Program Files\smartmontools\bin Correct: "C:\Program Files\smartmontools\bin" |
Note:
See TracQuery
for help on using queries.