Custom Query (1405 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (172 - 174 of 1405)

Ticket Resolution Summary Owner Reporter
#281 fixed smartctl hpt27xx controller with more than 16 devices Alex Samorukov stin9ray
Description

Limit of 16 devices seems to be hard coded.

The command to retrieve a smart dump for da16 fails: [

root@wood] ~# smartctl -d hpt,1/17/1 -x /dev/hpt27xx
smartctl 6.1 2013-03-16 r3800 [FreeBSD 9.1-STABLE amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/hpt27xx: Option '-d hpt,L/M/N' invalid channel number M supplied
=======> VALID ARGUMENTS ARE: ata, scsi, sat[,auto][,N][+TYPE], usbcypress[,X], usbjmicron[,p][,x][,N], usbsunplus, 3ware,N, hpt,L/M/N, cciss,N, areca,N/E, atacam, auto, test <=======

Use smartctl -h to get a usage summary

[root@wood] ~# smartctl -V
smartctl 6.1 2013-03-16 r3800 [FreeBSD 9.1-STABLE amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

smartctl comes with ABSOLUTELY NO WARRANTY. This is free
software, and you are welcome to redistribute it under
the terms of the GNU General Public License; either
version 2, or (at your option) any later version.
See http://www.gnu.org for further details.

smartmontools release 6.1 dated 2013-03-16 at 14:35:27 UTC
smartmontools SVN rev 3800 dated 2013-03-16 at 14:36:20
smartmontools build host: amd64-portbld-freebsd9.1
smartmontools build configured: 2013-06-14 17:22:15 UTC
smartctl compile dated Jun 14 2013 at 17:22:22
smartmontools configure arguments:  '--disable-dependency-tracking' '--enable-drivedb' '--enable-sample' '--with-initscriptdir=/usr/local/etc/rc.d' '--with-docdir=/usr/local/share/doc/smartmontools' '--prefix=/usr/local' '--mandir=/usr/local/man' '--infodir=/usr/local/info/' '--build=amd64-portbld-freebsd9.1' 'build_alias=amd64-portbld-freebsd9.1' 'CXX=c++' 'CXXFLAGS=-O -pipe -Wno-write-strings' 'LDFLAGS=' 'CPPFLAGS=' 'CC=cc' 'CFLAGS=-O -pipe -Wno-write-strings'
[root@wood] ~# uname -a
FreeBSD wood.lakeview42.com 9.1-STABLE FreeBSD 9.1-STABLE #0 r+043291a: Mon Jun 17 00:10:05 PDT 2013     root@build.ixsystems.com:/tank/build/nightlies/2013-06-17/os-base/amd64/tank/build/nightlies/2013-06-17/FreeBSD/src/sys/FREENAS.amd64  amd64
[root@wood] ~# 

Controller: High Point RocketRAID 2760A This controller is advertised as a 16 channel controller that "switches" 24 internal disks.

In my configuration here are 19 disks connected to the controller, all are detected as da0 .. da19. da0 at hpt27xx0 bus 0 scbus7 target 0 lun 0 da0: <HPT DISK 0_0 4.00> Fixed Direct Access SCSI-0 device da0: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C) [...] da19 at hpt27xx0 bus 0 scbus7 target 19 lun 0 da19: <HPT DISK 0_19 4.00> Fixed Direct Access SCSI-0 device da19: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)

The command: smartctl -d hpt,1/16/1 -x /dev/hpt27xx works as expected dumping all the smart info for da15.

#283 fixed problem with smartctl -a with SDM SSD memory device somebody jeremy385892
Description

I execute smartctl -a on a SATA-Disk Module SSD memory in freebsd 8.2 platform (with smartmontools 6.1) and and I have the following error with smartctl -a on this memory device:

START OF INFORMATION SECTION

Device Model: 2GB SATA Flash Drive Serial Number: 00101082267000105015 Firmware Version: SFI2101D User Capacity: 1,982,324,736 bytes [1.98 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS, ATA/ATAPI-4 published, ANSI NCITS 317-1998 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Tue Jun 25 11:25:48 2013 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled

START OF READ SMART DATA SECTION

SMART overall-health self-assessment test result: PASSED

General SMART Values: Offline data collection status: (0x00) Offline data collection activity

was never started. Auto Offline Data Collection: Disabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever been run.

Total time to complete Offline data collection: ( 1) seconds. Offline data collection capabilities: (0x75) SMART execute Offline immediate.

No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode. Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

No General Purpose Logging support.

Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 1) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes.

SMART Attributes Data Structure revision number: 7 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

12 Power_Cycle_Count 0x0200 100 100 000 Old_age Offline - 11

160 Unknown_Attribute 0x0200 100 100 000 Old_age Offline - 0 161 Unknown_Attribute 0x0200 100 100 000 Old_age Offline - 0 162 Unknown_Attribute 0x0200 100 100 000 Old_age Offline - 151 163 Unknown_Attribute 0x0200 100 100 000 Old_age Offline - 9 164 Unknown_Attribute 0x0200 100 100 000 Old_age Offline - 5 165 Unknown_Attribute 0x0200 100 100 000 Old_age Offline - 5 241 Total_LBAs_Written 0x0200 100 100 000 Old_age Offline - 16573426

ad0: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED> Read SMART Error Log failed: request failed, error code 0x05

ad0: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED> Read SMART Self-test Log failed: request failed, error code 0x05

ad0: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED> Read SMART Selective Self-test Log failed: request failed, error code 0x05

#291 fixed Temparature printout broken on tempminmax device once drive has been below 0C Christian Franke nadeau
Description

This is the output(below) I get from an SSD that has been in a temperature chamber.

Output ain't pretty anymore, used to be something like 23 (min/max 10/77)

I created a patch on github for that: https://github.com/fnadeau/smartmontools

I understand that you might not be interested in this patch for various reasons(drivedb.h not backward compatible, too many undocumented drive, etc.) Anyhow, I thought you might be interested.

smartctl 6.1 2013-03-16 r3800 [x86_64-linux-3.10.9-200.fc19.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SandForce Driven SSDs
Device Model:     KINGSTON SVP200S3480G
Serial Number:    50026B7226020429
LU WWN Device Id: 5 0026b7 226020429
Firmware Version: 501ABBF0
User Capacity:    480 103 981 056 bytes [480 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Aug 23 13:13:12 2013 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

.......

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   120   120   050    Pre-fail  Always       -       0/0
.......
194 Temperature_Celsius     0x0022   242   083   000    Old_age   Always       -       242 (0 239 0 83 0)
.......
242 Lifetime_Reads_GiB      0x0032   000   000   000    Old_age   Always       -       2
Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.