Custom Query (1564 matches)

version 5.41, 3256

If I run self-test on SATA drive, smartctl says that testing has begun, but actually it hasn't. Do not take atention at "interrupted self-test" in logs, it was made a long time ago.

If I run self-test on SAS disk, self-test starts and finishes successfully.

The problem can be:

1. Incorrect call from smartctl
2. Driver bug
3. Firmware bug

If you think that the problem lies out of smartmontools, may you create as much as possible simple code which runs self test only? I could make request to LSI support team using it. LSI doesnt want to deal with third-party soft like smartmontools directly.

PS. Is it possible to check that these ioctls are correct?

open("/dev/megaraid_sas_ioctl_node", O_RDWR) = 4 ioctl(4, MTRRIOC_SET_ENTRY, 0x7fffe4265050) = 0 ioctl(4, MTRRIOC_SET_ENTRY, 0x7fffe4264e30) = 0 write(1, "/dev/sg0 [megaraid_disk_19] [SAT]: Device open changed type from 'megaraid' to 'sat'\n", 85/dev/sg0 [megaraid_disk_19] [SAT]: Device open changed type from 'megaraid' to 'sat') = 85 ioctl(4, MTRRIOC_SET_ENTRY, 0x7fffe4261c20) = 0 ioctl(4, MTRRIOC_SET_ENTRY, 0x7fffe4261c30) = 0 write(1, "=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===\n", 57=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===) = 57 write(1, "Sending command: \"Execute SMART Extended self-test routine immediately in off-line mode\".\n", 90Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".) = 90 write(1, "Drive command \"Execute SMART Extended self-test routine immediately in off-line mode\" successful.\n", 98Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.) = 98 write(1, "Testing has begun.\n", 19Testing has begun.) = 19 write(1, "Please wait 4 minutes for test to complete.\n", 44Please wait 4 minutes for test to complete.) = 44

=====================================================================================================

smartctl -t long -dmegaraid,19 /dev/sg0 smartctl 5.41 2011-02-08 r3256M [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-11 by Bruce Allen, ​http://smartmontools.sourceforge.net

/dev/sg0 [megaraid_disk_19] [SAT]: Device open changed type from 'megaraid' to 'sat'

START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION

Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 4 minutes for test to complete. Test will complete after Mon Feb 14 19:58:34 2011

Use smartctl -X to abort test.

smartctl -a -dmegaraid,19 /dev/sg0

[...]

Self-test execution status: ( 32) The self-test routine was interrupted

by the host with a hard or soft reset.

[...]

smartctl -l selftest -dmegaraid,19 /dev/sg0 smartctl 5.41 2011-02-08 r3256M [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-11 by Bruce Allen, ​http://smartmontools.sourceforge.net

/dev/sg0 [megaraid_disk_19] [SAT]: Device open changed type from 'megaraid' to 'sat'

START OF READ SMART DATA SECTION

SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t]

=====================================================================================================

Please add scterc set command to smartd if possible

I would like to report that this Unknown USB bridge [0x0bc2:0x50a1]

Work with: -d sat,12

It is the Seagate FreeAgent GoFlex Desk USB 3.0 external HDD Tested with Windows 7 x64 with a Gigabyte GA-H55M-USB motherboard