Custom Query (1546 matches)
Results (295 - 297 of 1546)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #132 | fixed | Samsung G2 Portable works with -d usbjmicron | ||
| Description |
Samsung G2 Portable drive (04e8:6032) works fine with "-d usbjmicron" so please add this ID to the list. lsusb -v: ... Bus 002 Device 004: ID 04e8:6032 Samsung Electronics Co., Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x04e8 Samsung Electronics Co., Ltd idProduct 0x6032 bcdDevice 0.00 iManufacturer 1 JMicron iProduct 11 Samsung G2 Portable ... |
|||
| #226 | duplicate | SCSI passthrough on OS X | ||
| Description |
Support for external USB or FW drives is currently lacking on Mac OS X because that OS does not provide SCSI passthrough natively. There is however a kernel extension that promises to add exactly this: https://github.com/kasbert/OS-X-SAT-SMART-Driver . It would be great if the appropriate code could be added to os_darwin.* to support external drives under OS X also. I've taken a quick look at the code, but it doesn't look to be an easy fix without a serious bit of introduction... |
|||
| #1745 | fixed | Don't print error log entries if error count is zero | ||
| Description |
I received a new 256Gb Kingston (M-SATA) SSD and as usual I filled it with zeroes and then ran a long self-test before taking it into use.
Here's the output of smartctl 7.4 2023-08-01 r5530 [x86_64-linux-4.14.23-ck1-mainline-core2-rjvb] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Silicon Motion based SSDs
Device Model: KINGSTON SKC600MS256G
Serial Number: 50026B77856B72A3
LU WWN Device Id: 5 0026b7 7856b72a3
Firmware Version: S4800105
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database 7.3/5533
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Sep 9 18:35:36 2023 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0
9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 4
12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 2
148 Total_SLC_Erase_Ct 0x0000 100 100 000 Old_age Offline - 19
149 Max_SLC_Erase_Ct 0x0000 100 100 000 Old_age Offline - 2
150 Min_SLC_Erase_Ct 0x0000 100 100 000 Old_age Offline - 0
151 Average_SLC_Erase_Ct 0x0000 100 100 000 Old_age Offline - 1
159 DRAM_1_Bit_Error_Count 0x0000 100 100 000 Old_age Offline - 0
160 Uncorrectable_Error_Cnt 0x0000 100 100 000 Old_age Offline - 0
161 Valid_Spare_Block_Cnt 0x0000 100 100 000 Old_age Offline - 37
164 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 1487
165 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 6
166 Min_Erase_Count 0x0000 100 100 000 Old_age Offline - 2
167 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 2
169 Remaining_Lifetime_Perc 0x0000 100 100 000 Old_age Offline - 100
177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 0
181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0
182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0
192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 0
194 Temperature_Celsius 0x0000 043 063 000 Old_age Offline - 43
195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0
196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0
231 SSD_Life_Left 0x0000 100 100 000 Old_age Offline - 100
232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100
241 Host_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 13512
242 Host_Reads_32MiB 0x0000 100 100 000 Old_age Offline - 0
245 TLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 24535
SMART Error Log Version: 1
Warning: ATA error count 0 inconsistent with error log pointer 1
ATA Error Count: 0
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 ec 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
c8 00 00 00 00 00 00 00 00:00:00.000 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 4 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
The above only provides legacy SMART information - try 'smartctl -x' for more
I'm attaching the output of The SSD is in an Inateck enclosure currently connected over USB2. Does this indicate a problem with the drive, a glitch (cat tripping over the cable or something like that ;)) or an issue in smartmontools? |
|||
Note:
See TracQuery
for help on using queries.
