Custom Query (1546 matches)
Results (283 - 285 of 1546)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #1681 | fixed | Support for Actions Microelectronics AM8180 USB to NVMe bridge (0x1de1:0xe101, RTL9210) | ||
| Description |
I have an Actions Microelectronics Co. AM8180 USB to NVMe bridge which does not work with smartmontools out-of-the-box. ./smartctl -x /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.10.0-20-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org /dev/sdc: Unknown USB bridge [0x1de1:0xe101 (0x2001)] Please specify device type with the -d option. I did some research and found this post https://forums.anandtech.com/threads/stable-nvme-usb-adapter.2572973/post-40420233 which says the AM8180 is a rebranded Realtek RTL9210. So i tried: ./smartctl -d sntrealtek -x /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.10.0-20-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: KBG40ZNV512G KIOXIA Serial Number: 111111111 Firmware Version: HP00AE00 PCI Vendor/Subsystem ID: 0x1e0f IEEE OUI Identifier: 0x8ce38e Total NVM Capacity: 512.110.190.592 [512 GB] Unallocated NVM Capacity: 0 Controller ID: 0 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512.110.190.592 [512 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 8ce38e 040242b3bf Local Time is: Fri Dec 30 11:33:10 2022 CET Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x001f): Security Format Frmw_DL NS_Mngmt Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 79 Celsius Critical Comp. Temp. Threshold: 84 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 3.50W - - 0 0 0 0 1 1 1 + 2.60W - - 1 1 1 1 1 1 2 + 1.80W - - 2 2 2 2 1 1 3 - 0.0500W - - 4 4 4 4 800 1200 4 - 0.0050W - - 4 4 4 4 3000 32000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 3 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 42 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 3% Data Units Read: 6.781.283 [3,47 TB] Data Units Written: 6.428.169 [3,29 TB] Host Read Commands: 45.513.654 Host Write Commands: 36.660.875 Controller Busy Time: 416 Power Cycles: 360 Power On Hours: 749 Unsafe Shutdowns: 49 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 42 Celsius Warning: NVMe Get Log truncated to 0x200 bytes, 0x200 bytes zero filled Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged I suggest adding it to the list of supported bridges. lsusb -v output: Bus 002 Device 002: ID 1de1:e101 Actions Microelectronics Co. AM8180
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.20
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x1de1 Actions Microelectronics Co.
idProduct 0xe101
bcdDevice 20.01
iManufacturer 1 AMicro
iProduct 2 AM8180
iSerial 3 012345680000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0079
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 896mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 98
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Data-in pipe (0x03)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Data-out pipe (0x04)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 64
Status pipe (0x02)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Command pipe (0x01)
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x002a
bNumDeviceCaps 3
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000006
BESL Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
Container ID Device Capability:
bLength 20
bDescriptorType 16
bDevCapabilityType 4
bReserved 0
ContainerID {03020100-0504-0706-0002-020200020202}
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)
|
|||
| #1186 | wontfix | Under CentOS 7.5, smartctl fails to read SMART data on changed drive behind MegaRAID | ||
| Description |
I have two systems in which this is the case. The most recent just showed up today. What I did was this:
After this, smartctl -H -d megaraid,<drive> /dev/sda fails, "INQUIRY failed". MegaCli64 reports the drive's perfectly fine, and is a hot spare. Updated CentOS 7.6.1810, smartctl 6.5, from package smartmontools-6.5-1.el7.x86_64, which is the most current. |
|||
| #1740 | fixed | Submitting a new model of ssd not found in the database (INTENSO SSD/W0413A0) | ||
| Description |
Drive could perhaps just be added to "Silicon Motion based OEM SSDs" |
|||
Note:
See TracQuery
for help on using queries.
