Custom Query (1359 matches)
Results (22 - 24 of 1359)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #1475 | fixed | Drive submission - SAMSUNG MZ7LF192HCGS-000L1 | ||
| #1659 | fixed | WD-Blue-SA510 not in smartctl database | ||
| Description |
Hi there, WD-Blue-SA510 is not in smartctl database I also get the warning SMART ATA Error Log Structure error: invalid SMART checksum but that's a minor issue, I guess. Thank you in advance and keep up the good work! smartctl -x: smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-18-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WD Blue SA510 2.5 1000GB
Serial Number: 22243V460411
LU WWN Device Id: 5 001b44 4a543d67b
Firmware Version: 52008100
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-4, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Oct 17 21:51:28 2022 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
Conveyance self-test routine
recommended polling time: ( 1) minutes.
SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct -O--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 100 100 000 - 14
12 Power_Cycle_Count -O--CK 100 100 000 - 18
165 Unknown_Attribute -O--CK 100 100 000 - 524294
166 Unknown_Attribute -O--CK 100 100 000 - 0
167 Unknown_Attribute -O--CK 100 100 000 - 36
168 Unknown_Attribute -O--CK 100 100 000 - 1
169 Unknown_Attribute -O--CK 100 100 000 - 372
170 Unknown_Attribute -O--CK 100 100 000 - 0
171 Unknown_Attribute -O--CK 100 100 000 - 0
172 Unknown_Attribute -O--CK 100 100 000 - 0
173 Unknown_Attribute -O--CK 100 100 005 - 0
174 Unknown_Attribute -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
194 Temperature_Celsius -O---K 100 100 014 - 28 (Min/Max 18/31)
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
230 Unknown_SSD_Attribute -O--CK 100 100 000 - 4294967297
232 Available_Reservd_Space PO--CK 100 100 004 - 85
233 Media_Wearout_Indicator -O--CK 100 100 000 - 102
234 Unknown_Attribute -O--CK 100 100 000 - 229
241 Total_LBAs_Written ----CK 253 253 000 - 205
242 Total_LBAs_Read ----CK 253 253 000 - 16
244 Unknown_Attribute -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa1 GPL,SL VS 1 Device vendor specific log
0xa2 GPL,SL VS 2 Device vendor specific log
0xa3-0xa7 GPL,SL VS 1 Device vendor specific log
0xde GPL,SL VS 1 Device vendor specific log
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 14 -
# 2 Short offline Completed without error 00% 12 -
# 3 Extended offline Completed without error 00% 12 -
# 4 Short offline Completed without error 00% 11 -
# 5 Extended offline Completed without error 00% 10 -
# 6 Short offline Completed without error 00% 8 -
# 7 Short offline Completed without error 00% 8 -
# 8 Extended offline Completed without error 00% 8 -
# 9 Short offline Completed without error 00% 7 -
#10 Short offline Completed without error 00% 7 -
#11 Short offline Completed without error 00% 7 -
#12 Extended offline Completed without error 00% 6 -
#13 Short offline Completed without error 00% 3 -
#14 Short offline Completed without error 00% 3 -
#15 Extended offline Completed without error 10% 3 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (empty) ==
0x05 ===== = = === == Temperature Statistics (empty) ==
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|||
| #233 | wontfix | Impossible to access to the physical disks behind a 3Ware 9650 RAID card | ||
| Description |
I have an 3Ware 9650 RAID card with 4 physical disks (Samsung HD203WI with tler modifiable) and 4 logical partitions but I can't access to the physical disks, when I type (for example) smartctl -i /dev/sdc,1 or smartctl -i /dev/sdc,2 I get informations on the partitions and not informations on the disks. So I can't change the TLER parameter of my disks. The OS is Windows 2003, the smartmontools version is 5.43, the 3Ware driver version is 3.00.05.056 and the firmware is 4.10.00.026.
smartctl -i /dev/sdb,1 smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-2003-sp2] (sf-5.43-1) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net Vendor: LSI Product: 9650SE-16ML Revision: 4.10 User Capacity: 2á999á967á547á392 bytes [2,99 TB] Logical block size: 512 bytes Logical Unit id: 0x600050e0c12df40038490000af5b0000 Serial number: WZ502711C12DF4003849 Device type: disk scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0 Local Time is: Sun Aug 12 13:40:09 2012 PM Device supports SMART and is Disabled Temperature Warning Disabled or Not Supported smartctl -i /dev/sdb,2 smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-2003-sp2] (sf-5.43-1) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net Vendor: LSI Product: 9650SE-16ML Revision: 4.10 User Capacity: 2á999á967á547á392 bytes [2,99 TB] Logical block size: 512 bytes Logical Unit id: 0x600050e0c12df40038490000af5b0000 Serial number: WZ502711C12DF4003849 Device type: disk scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0 Local Time is: Sun Aug 12 13:40:14 2012 PM Device supports SMART and is Disabled Temperature Warning Disabled or Not Supported smartctl -i /dev/sdc,1 smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-2003-sp2] (sf-5.43-1) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net Vendor: LSI Product: 9650SE-16ML Revision: 4.10 User Capacity: 1á999á988á850á688 bytes [1,99 TB] Logical block size: 512 bytes Logical Unit id: 0x600050e0c0fa1800524d000053430000 Serial number: WZ707793C0FA1800524D Device type: disk scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0 Local Time is: Sun Aug 12 13:15:40 2012 PM Device supports SMART and is Disabled Temperature Warning Disabled or Not Supported smartctl -i /dev/sdc,2 smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-2003-sp2] (sf-5.43-1) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net Vendor: LSI Product: 9650SE-16ML Revision: 4.10 User Capacity: 1á999á988á850á688 bytes [1,99 TB] Logical block size: 512 bytes Logical Unit id: 0x600050e0c0fa1800524d000053430000 Serial number: WZ707793C0FA1800524D Device type: disk scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0 Local Time is: Sun Aug 12 13:15:43 2012 PM Device supports SMART and is Disabled Temperature Warning Disabled or Not Supported |
|||
