Custom Query (1469 matches)
Results (202 - 204 of 1469)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #1565 | fixed | Add Apricorn EZ-UP3 to the list of supported USB devices (0x0984:0x0320) | ||
| Description |
Apricorn EZ-UP3 is a USB 3.0 2.5" SATA enclosure identified by [0x0984:0x0320 (0x133)] and based around the INIC-3607 controller. Smartmontools is able to query it with the |
|||
| #811 | worksforme | Replace -d scsi by -d sat, due to "no SMART info" by -d scsi, when use smartctl --scan | ||
| Description |
Problem:Can't use smartctl --scan results for scripting due to incorrect device discovering. When i use default -d scsi value, get no SMART health status and no SMART attributes. Output 1:smartctl --scan /dev/sdb -d scsi # /dev/sdb, SCSI device Output 2:smartctl -a /dev/sdb -d scsi smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org User Capacity: 500,107,862,016 bytes [500 GB] Logical block size: 512 bytes Rotation Rate: 7200 rpm Logical Unit id: 0x50014ee003b89f21 Serial number: WD-WMAYP7267562 Device type: disk Local Time is: Tue Feb 28 02:51:56 2017 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Disabled or Not Supported === START OF READ SMART DATA SECTION === Log Sense failed, IE page [scsi response fails sanity test] Error Counter logging not supported Output 3:smartctl -a /dev/sdb -d sat smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE4
Device Model: WDC WD5003ABYZ-011FA0
Serial Number: WD-WMAYP7267562
LU WWN Device Id: 5 0014ee 003b89f21
Firmware Version: 01.01S03
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Feb 28 03:03:41 2017 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 8100) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 82) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 4
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5144
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 4
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 3
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 6
194 Temperature_Celsius 0x0022 113 089 000 Old_age Always - 30
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
|
|||
| #242 | wontfix | Adding Support for USB 2.0 IDE Adapter (ID 05e3:0702) | ||
| Description |
There is Genesys Logic, Inc. USB 2.0 IDE Adapter (ID 05e3:0702) described in wiki, that it is unsupported, and link to the mail archive. Ok, but why is it unsupported? There is no information in wiki. Is it impossible to add its support? I was reading datasheet http://www.datasheetcatalog.net/de/datasheets_pdf/G/L/8/1/GL811E.shtml And found that this bridge complies with ATA/ATAPI-6 specification rev 1.0, and ATAPI-6 includes S.M.A.R.T. support. I'm not an expert, though. Add support to this bridge, please. Or if it is impossible to add, explain this in wiki. |
|||
