Custom Query (1364 matches)
Results (160 - 162 of 1364)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #636 | fixed | Add SAMSUNG MZ7LN128HCHP-00000 | ||
| Description |
Please add SAMSUNG MZ7LN128HCHP-00000 to the database. It seems to be Samsung PM-871 smartctl 6.5 2016-01-06 r4198 [x86_64-linux-4.4.0-1.el6.elrepo.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG MZ7LN128HCHP-00000
Serial Number: S1ZFNXAG701382
LU WWN Device Id: 5 002538 d402b799b
Firmware Version: EMT0100Q
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jan 17 17:27:03 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 64) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 49
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 3
170 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
171 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
173 Unknown_Attribute 0x0033 099 099 005 Pre-fail Always - 1
174 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 1
178 Used_Rsvd_Blk_Cnt_Chip 0x0013 100 100 010 Pre-fail Always - 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 386
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 063 056 000 Old_age Always - 37
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
233 Media_Wearout_Indicator 0x0013 099 099 000 Pre-fail Always - 16768826
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 123
242 Total_LBAs_Read 0x0032 099 099 000 Old_age Always - 114
249 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 128
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|||
| #745 | fixed | Add Samsung PM871a | ||
| Description |
It's not in our database. It's a successor to the PM871. smartctl 6.6 2016-09-25 r4345 [x86_64-linux-3.10.0-327.36.1.el7.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG MZ7LN256HMJP-00000
Serial Number: S2MJNX0H403606
LU WWN Device Id: 5 002538 d40cd8db4
Firmware Version: MAV0100Q
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Sep 26 23:28:59 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 133) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1450
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 3
170 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
171 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
173 Unknown_Attribute 0x0033 099 099 005 Pre-fail Always - 1
174 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 1
178 Used_Rsvd_Blk_Cnt_Chip 0x0013 100 100 010 Pre-fail Always - 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 820
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 065 064 000 Old_age Always - 35
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
233 Media_Wearout_Indicator 0x0013 099 099 000 Pre-fail Always - 16763233
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 355
242 Total_LBAs_Read 0x0032 099 099 000 Old_age Always - 3
249 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 355
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|||
| #823 | fixed | Add CoreRise Comay BladeDrive E28 800GB | ||
| Description |
Please add it to the smartctl database. It's a PCI-Express SSD card. All missing SMART parameters are attached. smartctl 6.6 2017-03-11 r4410 [x86_64-w64-mingw32-win7-sp1] (daily-20170311)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Comay BladeDrive E28 800GB
Serial Number: ADDC13RHM64MPDDT2Y
LU WWN Device Id: 5 000000 361c23f9f
Firmware Version: 2.71
User Capacity: 800 241 745 920 bytes [800 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Mar 24 23:34:33 2017
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0033 095 095 050 Pre-fail Always - 274400134
5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2608 (203 116 0)
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 43
13 Read_Soft_Error_Rate 0x0032 095 095 000 Old_age Always - 274400134
100 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 2877
170 Unknown_Attribute 0x0040 000 000 000 Old_age Offline - 68096
171 Unknown_Attribute 0x000a 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 36
177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 0
181 Program_Fail_Cnt_Total 0x000a 100 100 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x00b4 100 100 090 Old_age Offline - 0
187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 052 052 000 Old_age Always - 52 (Min/Max 37/52)
195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 274400134
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
198 Offline_Uncorrectable 0x0010 120 120 000 Old_age Offline - 3874060500992
199 UDMA_CRC_Error_Count 0x0090 200 200 000 Old_age Offline - 0
201 Unknown_SSD_Attribute 0x001c 120 120 000 Old_age Offline - 274400134
204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 274400134
230 Unknown_SSD_Attribute 0x0013 100 100 000 Pre-fail Always - 0
231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0
232 Available_Reservd_Space 0x0032 000 000 000 Old_age Always - 264
233 Media_Wearout_Indicator 0x0032 000 000 000 Old_age Always - 2536
234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 2824
235 Unknown_Attribute 0x0033 100 100 002 Pre-fail Always - 0
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 2824
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 3792
SMART Error Log not supported
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|||
Note:
See TracQuery
for help on using queries.
