Custom Query (1376 matches)
Results (241 - 243 of 1376)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #1423 | duplicate | Micron_5300_MTFDDAK480TDS | ||
| Description |
Micron_5300_MTFDDAK480TDS |
|||
| #1455 | fixed | Add to drivedb: WDC 8TB My Book - WD80EDAZ | ||
| Description |
Hello, WDC-WD80EDAZ My Book 8TB is not in https://www.smartmontools.org/browser/trunk/smartmontools/drivedb.h . Please find attached the output of smartctl to help add this specific model to the database. Manufacturer link: https://shop.westerndigital.com/products/external-drives/wd-my-book-usb-3-0-hdd#WDBBGB0080HBK-NESN Regards and thanks. |
|||
| #1331 | duplicate | smartctl 7.1 doesn't show attributes on Seagate SAS drives but 6.6 does | ||
| Description |
For this I'm using a Dell R720xd with an LSI 9211-8i HBA in IT Mode and a Seagate ST3300657SS. I'm testing 7.1 using Debian Buster and 6.6 using Ubuntu Bionic because that is the default version they come with. If there are downstream code changes by the distribution responsible for this difference I apologize and will redirect my issue there. Here is the result from Debian Buster root@cloud1:~# smartctl -a /dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.3.18-2-pve] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: SEAGATE Product: ST3300657SS Revision: 000B Compliance: SPC-3 User Capacity: 300,000,000,000 bytes [300 GB] Logical block size: 512 bytes Rotation Rate: 15000 rpm Form Factor: 3.5 inches Logical Unit id: 0x5000c5008db145bb Serial number: 6SJ840DR0000N4381HL2 Device type: disk Transport protocol: SAS (SPL-3) Local Time is: Mon May 11 09:32:19 2020 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 0 C Drive Trip Temperature: 0 C Elements in grown defect list: 0 Error Counter logging not supported Device does not support Self Test logging And here is the result for the same drive from Ubuntu Bionic root@ubuntu:~# smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.0.0-23-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: SEAGATE
Product: ST3300657SS
Revision: 000B
User Capacity: 300,000,000,000 bytes [300 GB]
Logical block size: 512 bytes
Rotation Rate: 15000 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000c5008db145bb
Serial number: 6SJ840DR0000N4381HL2
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Mon May 11 14:48:23 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 33 C
Drive Trip Temperature: 68 C
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 1460697
Blocks received from initiator = 8989202
Blocks read from cache and sent to initiator = 170255
Number of read and write commands whose size <= segment size = 79689
Number of read and write commands whose size > segment size = 1
Vendor (Seagate/Hitachi) factory information
number of hours powered up = 13257.17
number of minutes until next internal SMART test = 34
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 21440 0 0 21440 21440 0.748 0
write: 0 0 0 0 0 4.628 0
verify: 1976 0 0 1976 1976 0.000 0
Non-medium error count: 0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background short Completed - 366 - [- - -]
# 2 Background short Completed - 1 - [- - -]
# 3 Background short Completed - 0 - [- - -]
Long (extended) Self Test duration: 3200 seconds [53.3 minutes]
|
|||
