Custom Query (1415 matches)
Results (22 - 24 of 1415)
Ticket | Resolution | Summary | Owner | Reporter |
---|---|---|---|---|
#1244 | fixed | not in database INTEL-SSDSCKKF512G8 SATA 512GB | ||
Description |
The following SSD is not in the database : INTEL SSDSCKKF512G8 SATA 512GB Used in a DELL LATITUDE 5590 laptop. |
|||
#804 | fixed | CSMI ports != 0 no longer accessible after an update of IRST driver to 15.2 | ||
Description |
C:\>smartctl --scan /dev/sda -d scsi # /dev/sda, SCSI device /dev/csmi2,0 -d ata # /dev/csmi2,0, ATA device C:\>smartctl -a /dev/sda smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win7(64)-sp1] (sf-6.5-1) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: Intel Product: Raid 1 Volume Revision: 1.0. User Capacity: 500,105,547,264 bytes [500 GB] Logical block size: 512 bytes LU is fully provisioned Rotation Rate: 5400 rpm Logical Unit id: 0x785a2d5700000000001517ffff0aeb84 Serial number: OutletSVR Device type: disk Local Time is: Wed Feb 08 09:05:58 2017 MPST SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Disabled or Not Supported === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 0 C Drive Trip Temperature: 0 C Error Counter logging not supported Device does not support Self Test logging C:\>smartctl -a /dev/csmi2,0 -d ata smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win7(64)-sp1] (sf-6.5-1) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MQ01ABF... Device Model: TOSHIBA MQ01ABF050 Serial Number: 66R8P3FJT LU WWN Device Id: 5 000039 71250ad18 Firmware Version: AM0P2A User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Feb 08 09:07:19 2017 MPST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 123) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1394 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 17 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 14 10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 16 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 4 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 164 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 28 (Min/Max 21/33) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0 222 Loaded_Hours 0x0032 100 100 000 Old_age Always - 13 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 250 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. C:\>smartctl -r ioctl,2 -d csmi --scan \\.\Scsi0:: successfully opened IOCTL_SCSI_MINIPORT(CC_CSMI_1) failed, Error=1 \\.\Scsi1:: successfully opened IOCTL_SCSI_MINIPORT(CC_CSMI_1) failed, Error=1 \\.\Scsi2:: successfully opened IOCTL_SCSI_MINIPORT(CC_CSMI_1) succeeded, bytes returned: 204 CSMI_SAS_DRIVER_INFO: Name: "iaStorA" Description: "Intel(R) Rapid Storage Technology " Revision: 15.2 IOCTL_SCSI_MINIPORT(CC_CSMI_20) succeeded, bytes returned: 2080 CSMI_SAS_PHY_INFO: NumberOfPhys=6 Phy[0] Port: 0x00 Type: 0x10, 0x10 InitProto: 0x01, 0x00 TargetProto: 0x00, 0x01 PhyIdent: 0x00, 0x00 SASAddress: 00 00 00 00 00 00 00 00, 00 00 00 00 00 00 00 00 Phy[1] Port: 0x00 Type: 0x10, 0x10 InitProto: 0x01, 0x00 TargetProto: 0x00, 0x01 PhyIdent: 0x01, 0x01 SASAddress: 00 00 00 00 00 00 00 00, 00 01 00 00 00 00 00 00 Phy[2] Port: 0x00 Type: 0x10, 0x00 InitProto: 0x01, 0x00 TargetProto: 0x00, 0x01 PhyIdent: 0x02, 0x02 SASAddress: 00 00 00 00 00 00 00 00, 00 02 00 00 00 00 00 00 Phy[3] Port: 0x00 Type: 0x10, 0x00 InitProto: 0x01, 0x00 TargetProto: 0x00, 0x01 PhyIdent: 0x03, 0x03 SASAddress: 00 00 00 00 00 00 00 00, 00 03 00 00 00 00 00 00 Phy[4] Port: 0x00 Type: 0x10, 0x00 InitProto: 0x01, 0x00 TargetProto: 0x00, 0x01 PhyIdent: 0x04, 0x04 SASAddress: 00 00 00 00 00 00 00 00, 00 04 00 00 00 00 00 00 Phy[5] Port: 0x00 Type: 0x10, 0x00 InitProto: 0x01, 0x00 TargetProto: 0x00, 0x01 PhyIdent: 0x05, 0x05 SASAddress: 00 00 00 00 00 00 00 00, 00 05 00 00 00 00 00 00 /dev/csmi2,0 -d ata # /dev/csmi2,0, ATA device |
|||
#1235 | fixed | new USB HDD: LaCie P'9230 "Porsche Design Desktop Drive" 2 To (059f:1053) | ||
Description |
LaCie P'9230 "Porsche Design Desktop Drive" 2 To (USB 3.0) LaCie model reference is LAC302002.
It's an external Hard Disk bought 6 years ago. The device has USB ID |
Note:
See TracQuery
for help on using queries.