Custom Query (1434 matches)
Results (205 - 207 of 1434)
Ticket | Resolution | Summary | Owner | Reporter |
---|---|---|---|---|
#1618 | fixed | program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO | ||
Description |
Hi all For years, I've been spammed with "program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO" in the kernel log. This happens on several machines with varying versions of primarily Debian, but also others. The last one I checked, was one with fully updated Bullseye with smartmontools version: smartmontools release 7.2 dated 2020-12-30 at 16:48:30 UTC smartmontools SVN rev 5155 dated 2020-12-30 at 16:49:18 smartmontools build host: x86_64-pc-linux-gnu smartmontools build with: C++14, GCC 10.2.1 20201224 smartmontools configure arguments: '--includedir=${prefix}/include' '--mandir=${prefix}/share/man' '--infodir=${prefix}/share/info' '--localstatedir=/var' '--disable-option-checking' '--disable-silent-rules' '--libdir=${prefix}/lib/x86_64-linux-gnu' '--runstatedir=/run' '--disable-maintainer-mode' '--disable-dependency-tracking' '--build=x86_64-linux-gnu' '--host=x86_64-linux-gnu' '--prefix=/usr' '--sysconfdir=/etc' '--mandir=/usr/share/man' '--with-initscriptdir=no' '--docdir=/usr/share/doc/smartmontools' '--with-attributelog=/var/lib/smartmontools/attrlog.' '--with-drivedbdir=/var/lib/smartmontools/drivedb' '--with-exampledir=/usr/share/doc/smartmontools/examples/' '--with-savestates=/var/lib/smartmontools/smartd.' '--with-smartdplugindir=/etc/smartmontools/smartd_warning.d' '--with-smartdscriptdir=/usr/share/smartmontools' '--with-systemdenvfile=/etc/default/smartmontools' '--with-systemdsystemunitdir=/lib/systemd/system' '--with-libsystemd=auto' '--with-selinux' 'build_alias=x86_64-linux-gnu' 'host_alias=x86_64-linux-gnu' 'CXXFLAGS=-g -O2 -fdebug-prefix-map=/build/smartmontools-aUy3Yi/smartmontools-7.2=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall' 'LDFLAGS=-Wl,-z,relro -Wl,-z,now' 'CPPFLAGS=-Wdate-time -D_FORTIFY_SOURCE=2' 'CFLAGS=-g -O2 -fdebug-prefix-map=/build/smartmontools-aUy3Yi/smartmontools-7.2=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall' |
|||
#765 | fixed | Add Western Digital Black WD4004FZWX to drivedb.h | ||
Description |
Following the instructions from smartmontools FAQ and after concluding, that this drive is not yet included in drivedb.h, I hereby submit the data required for adding it. smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-45-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD4004FZWX-00GBGB0 Firmware Version: 81.H0A81 User Capacity: 4.000.787.030.016 bytes [4,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Nov 8 09:24:15 2016 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 113) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 571) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 100 100 054 - 0 3 Spin_Up_Time POS--- 100 100 024 - 0 4 Start_Stop_Count -O--C- 100 100 000 - 1 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 020 - 0 9 Power_On_Hours -O--C- 100 100 000 - 17 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 1 192 Power-Off_Retract_Count -O--CK 100 100 000 - 2 193 Load_Cycle_Count -O--C- 100 100 000 - 2 194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 24/33) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x12 GPL R/O 1 SATA NCQ NON-DATA log 0x15 GPL,SL R/W 1 SATA Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 256 Current Device Internal Status Data log 0x25 GPL R/O 256 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 17 - # 2 Extended offline Completed without error 00% 9 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 24/33 Celsius Lifetime Min/Max Temperature: 24/33 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (8) Index Estimated Time Temperature Celsius 9 2016-11-08 07:17 30 *********** ... ..(116 skipped). .. *********** 126 2016-11-08 09:14 30 *********** 127 2016-11-08 09:15 31 ************ ... ..( 4 skipped). .. ************ 4 2016-11-08 09:20 31 ************ 5 2016-11-08 09:21 32 ************* 6 2016-11-08 09:22 31 ************ 7 2016-11-08 09:23 31 ************ 8 2016-11-08 09:24 30 *********** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 1 --- Lifetime Power-On Resets 0x01 0x018 6 921896 --- Logical Sectors Written 0x01 0x020 6 4194 --- Number of Write Commands 0x01 0x028 6 557389 --- Logical Sectors Read 0x01 0x030 6 7580 --- Number of Read Commands 0x01 0x038 6 62067750 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 17 --- Spindle Motor Power-on Hours 0x03 0x010 4 17 --- Head Flying Hours 0x03 0x018 4 2 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 18 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 31 --- Current Temperature 0x05 0x010 1 30 N-- Average Short Term Temperature 0x05 0x018 1 - N-- Average Long Term Temperature 0x05 0x020 1 33 --- Highest Temperature 0x05 0x028 1 24 --- Lowest Temperature 0x05 0x030 1 31 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 - N-- Highest Average Long Term Temperature 0x05 0x048 1 - N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 3 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS |
|||
#1794 | fixed | drivedb.h: Toshiba MG-Series improvement | ||
Description |
Dear Smartmontools-Team, I propose an update to the drivedb.h file in order to correctly support the Toshiba MG-Series harddrives. The current Regexes do not cover all drive models (especially the SAS-Models are not covered). The proposed changes can be found in the attached diff file. Information on the MG-Series drives are sourced from this Toshiba datasheet: https://www.toshiba-storage.com/wp-content/uploads/2018/04 Toshiba Model numbers have the following meaning: 1-4 Series Number MGnn: with nn in 04,05,05,06,07,08,09,10 5 Interface A: SATA S: SAS 6 RPM C: 7,200 rpm 7 Height A: 26.1 mm F: unknown 8-10 Formatted Capacity 400: 4 TByte 600: 6 TByte 800: 8 TByte 10T: 10 TByte 12T: 12 TByte 14T: 14 TByte 16T: 16 TByte 20T: 20 TByte 22T: 22 TByte 11-12 Options A: 4K Native (4Kn) AF E: 512 B Emulation (512e) AF N: 512 B Native (512n) Format AY: 4K Native (4Kn) AF and SIE ( Sanitize Instant Erase ) EY: 512 B Emulation (512e) AF and SIE ( Sanitize Instant Erase ) NY: 512 B Native (512n) Format and SIE ( Sanitize Instant Erase ) See also: https://toshiba.semicon-storage.com/ap-en/storage/support/storage-products-hdd.html However, I belive this support page describing the model numbers is not 100% correct! I hope that helps improving smartmontools. Best regards Sascha |