Custom Query (1367 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (187 - 189 of 1367)

Ticket Resolution Summary Owner Reporter
#1725 duplicate NVMe pass-through support for Argon ONE M.2 Expansion Board (NVME) RobertCezar
Description

I tried to get info of Argon ONE M.2 Expansion Board (NVME), but got this error (I had to specify -d scsi by trial and error otherwise got error)

sudo smartctl /dev/sdb
smartctl 7.2 2020-12-30 r5155 [aarch64-linux-6.1.21-v8+] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/sdb: Unknown SNT device type 'sntasmedia'
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

 sudo smartctl -a -d scsi /dev/sdb
smartctl 7.2 2020-12-30 r5155 [aarch64-linux-6.1.21-v8+] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               Argon
Product:              Forty
Revision:             0
Compliance:           SPC-4
User Capacity:        2,000,398,934,016 bytes [2.00 TB]
Logical block size:   512 bytes
LU is fully provisioned
Rotation Rate:        Solid State Device
Logical Unit id:      0x5000000000000001
Serial number:        50F000000000
Device type:          disk
Local Time is:        Sat May 13 10:38:14 2023 EEST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Disabled or Not Supported

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported

Device does not support Self Test logging

sudo smartctl -a -d sntrealtek /dev/sdb -r ioctl,2
smartctl 7.2 2020-12-30 r5155 [aarch64-linux-6.1.21-v8+] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

 [NVMe call: opcode=0x06, size=0x1000, nsid=0x00000000, cdw10=0x00000001]
>>>> do_scsi_cmnd_io: sg_io_ver=3
 [<vendor specific>: e4 00 10 06 01 00 00 00 00 00 00 00 00 00 00 00 ]
  scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
  sg_info=0x0  sg_duration=0 milliseconds  resid=4096
  Incoming data trimmed to nothing by resid
 [NVMe call succeeded: result=0x00000000
 00     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00    ................
 10     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00    ................
 ...
 ]
=== START OF INFORMATION SECTION ===
Model Number:
Serial Number:
Firmware Version:
PCI Vendor ID:                      0x0000
PCI Vendor Subsystem ID:            0x0000
IEEE OUI Identifier:                0x000000
Total NVM Capacity:                 0
Unallocated NVM Capacity:           0
Controller ID:                      0
NVMe Version:                       <1.2
Number of Namespaces:               0
Local Time is:                      Sat May 13 10:41:39 2023 EEST
Firmware Updates (0x00):            0 Slots
Optional Admin Commands (0x0000):   -
Optional NVM Commands (0x0000):     -
Log Page Attributes (0x00):         -
Maximum Data Transfer Size:         -
Warning  Comp. Temp. Threshold:     -
Critical Comp. Temp. Threshold:     -
Namespace 4294967295 Features (0x00):      -

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     0.00W       -        -    0  0  0  0        0       0

=== START OF SMART DATA SECTION ===
 [NVMe call: opcode=0x02, size=0x0200, nsid=0xffffffff, cdw10=0x007f0002]
>>>> do_scsi_cmnd_io: sg_io_ver=3
 [<vendor specific>: e4 00 02 02 02 00 00 00 00 00 00 00 00 00 00 00 ]
  scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
  sg_info=0x0  sg_duration=4 milliseconds  resid=512
  Incoming data trimmed to nothing by resid
 [NVMe call succeeded: result=0x00000000
 00     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00    ................
 10     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00    ................
 ...
 ]
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        -
Available Spare:                    0%
Available Spare Threshold:          0%
Percentage Used:                    0%
Data Units Read:                    0
Data Units Written:                 0
Host Read Commands:                 0
Host Write Commands:                0
Controller Busy Time:               0
Power Cycles:                       0
Power On Hours:                     0
Unsafe Shutdowns:                   0
Media and Data Integrity Errors:    0
Error Information Log Entries:      0
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Temperature Sensor 1:               -
Temperature Sensor 2:               -
Temperature Sensor 3:               -
Temperature Sensor 4:               -
Temperature Sensor 5:               -
Temperature Sensor 6:               -
Temperature Sensor 7:               -
Temperature Sensor 8:               -
Thermal Temp. 1 Transition Count:   0
Thermal Temp. 2 Transition Count:   0
Thermal Temp. 1 Total Time:         0
Thermal Temp. 2 Total Time:         0

 [NVMe call: opcode=0x02, size=0x0040, nsid=0xffffffff, cdw10=0x000f0001]
>>>> do_scsi_cmnd_io: sg_io_ver=3
 [<vendor specific>: e4 40 00 02 01 00 00 00 00 00 00 00 00 00 00 00 ]
  scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
  sg_info=0x0  sg_duration=0 milliseconds  resid=0
  Incoming data, len=64:
 00     50 00 00 00 00 00 00 01  00 b0 00 3c 00 00 00 01
 10     00 00 08 00 00 00 00 00  00 00 00 00 00 00 00 00
 20     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 30     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 [NVMe call succeeded: result=0x00000000
 00     50 00 00 00 00 00 00 01  00 b0 00 3c 00 00 00 01    P..........<....
 10     00 00 08 00 00 00 00 00  00 00 00 00 00 00 00 00    ................
 20     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00    ................
 ...
 ]
Error Information (NVMe Log 0x01, 1 of 1 entries)
Num   ErrCount  SQId   CmdId  Status  PELoc          LBA  NSID    VS
  0 72057594037928016 45056  0x3c00  0x0000  0x100       524288     0     -

#1346 fixed Seagate ST2000NM0001 is not working correctly with smartctl RobotToaster44
Description

It seems like the Seagate ST2000NMCLAR2000 doesn't display much SMART info.

Starting a test appears to work

root@openmediavault:~# smartctl -t short /dev/sdj
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.44-1-pve] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

Short Background Self Test has begun
Use smartctl -X to abort test

But smartctl -a does not show any self test results, and only shows

root@openmediavault:~# smartctl -a /dev/sdj
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.44-1-pve] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST2000NMCLAR2000
Revision:             PS0C
Compliance:           SPC-3
User Capacity:        2,000,398,934,016 bytes [2.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c5004206728f
Serial number:        Z1P36WBH    0000C2472NB6
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Fri Jul  3 21:56:39 2020 BST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Disabled or Not Supported

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Elements in grown defect list: 0

Error Counter logging not supported

Device does not support Self Test logging

I found a similar bug report here https://www.smartmontools.org/ticket/678?cversion=1&cnum_hist=7

so I ran sg_logs which returned this, which seems to indicate it does support temperature and self test logging

root@openmediavault:~# sg_logs -v /dev/sdj
    inquiry cdb: 12 00 00 00 24 00
    SEAGATE   ST2000NMCLAR2000  PS0C
    log sense cdb: 4d 00 40 00 00 00 00 00 04 00
    log sense cdb: 4d 00 40 00 00 00 00 00 14 00
Supported log pages  [0x0]:
    0x00        Supported log pages [sp]
    0x02        Write error [we]
    0x03        Read error [re]
    0x05        Verify error [ve]
    0x06        Non medium [nm]
    0x0d        Temperature [temp]
    0x0e        Start-stop cycle counter [sscc]
    0x0f        Application client [ac]
    0x10        Self test results [str]
    0x15        Background scan results [bsr]
    0x18        Protocol specific port [psp]
    0x1a        Power condition transitions [pct]
    0x37        Cache (seagate) [c_se]
    0x38
    0x3e        Factory (seagate) [f_se]

scsi_temperature also seems to work:

root@openmediavault:~# scsi_temperature /dev/sdj
sg_logs -t  /dev/sdj
    SEAGATE   ST2000NMCLAR2000  PS0C
  Current temperature = 34 C
  Reference temperature = 68 C
#1008 invalid JMicron 152d:0539 always run smart check only over the first disk Daniele Palumbo
Description

I have bought quite time ago a Orico B01823CC8Y, 4 bay open tray.

-d jmicron is not working When i run smartctl with -d sat -t [long|short], always the first disc is scanned, even if this is not te first one recognized.

See this example

~# smartctl -d sat /dev/sdb  -t short
smartctl 6.6 2016-05-31 r4324 [armv7l-linux-4.9.86-odroidxu4] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 1 minutes for test to complete.
Test will complete after Wed Mar 14 01:46:23 2018

Use smartctl -X to abort test.
~# smartctl -d sat /dev/sdb  -a|grep 'Serial\|# 1'
Serial Number:    Z296XNGZ
# 1  Short offline       Aborted by host               10%     26764         -
# smartctl -d sat /dev/sda  -a|grep 'Serial\|# 1'
Serial Number:    9WM3VKQ8
# 1  Short offline       Self-test routine in progress 80%     18258         -
~# 

lsusb of the device

# lsusb -d 152d:0539 -v
Bus 004 Device 003: ID 152d:0539 JMicron Technology Corp. / JMicron USA Technology Corp. JMS539/567 SuperSpeed SATA II/III 3.0G/6.0G Bridge
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         9
  idVendor           0x152d JMicron Technology Corp. / JMicron USA Technology Corp.
  idProduct          0x0539 JMS539/567 SuperSpeed SATA II/III 3.0G/6.0G Bridge
  bcdDevice           28.06
  iManufacturer          10 JMicron
  iProduct               11 USB to ATA/ATAPI Bridge
  iSerial                 5 000000000000
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           44
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           42
  bNumDeviceCaps          3
  USB 2.0 Extension Device Capability:
    bLength                 7
    bDescriptorType        16
    bDevCapabilityType      2
    bmAttributes   0x00000002
      Link Power Management (LPM) Supported
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
    wSpeedsSupported   0x000e
      Device can operate at Full Speed (12Mbps)
      Device can operate at High Speed (480Mbps)
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   1
      Lowest fully-functional device speed is Full Speed (12Mbps)
    bU1DevExitLat          10 micro seconds
    bU2DevExitLat          32 micro seconds
  Container ID Device Capability:
    bLength                20
    bDescriptorType        16
    bDevCapabilityType      4
    bmAttributes   0x00000002
      Link Power Management (LPM) Supported
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
    wSpeedsSupported   0x000e
      Device can operate at Full Speed (12Mbps)
      Device can operate at High Speed (480Mbps)
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   1
      Lowest fully-functional device speed is Full Speed (12Mbps)
    bU1DevExitLat          10 micro seconds
    bU2DevExitLat          32 micro seconds
  Container ID Device Capability:
    bLength                20
    bDescriptorType        16
    bDevCapabilityType      4
    bReserved               0
    ContainerID             {00010203-0405-0607-0800-000000000000}
Device Status:     0x0001
  Self Powered

Please sk for any furher data needed

Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.