Custom Query (1383 matches)

When I use smartctl -s off /dev/sda with admin privilege, the SMART support is said to be disable:

    C:\Program Files\smartmontools\bin>smartctl -s off /dev/sda
    smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win8.1] (sf-6.5-1)
    Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
    
    === START OF ENABLE/DISABLE COMMANDS SECTION ===
    SMART Disabled. Use option -s with argument 'on' to enable it.

It is confirmed by using smartctl -a /dev/sda/:

    C:\Program Files\smartmontools\bin>smartctl -a /dev/sda
    smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win8.1] (sf-6.5-1)
    Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
    
    === START OF INFORMATION SECTION ===
    Model Family:     Hitachi/HGST Travelstar Z5K320
    Device Model:     Hitachi HTS543232A7A384
    Serial Number:    E2034243EEG7TP
    LU WWN Device Id: 5 000cca 690e24d54
    Firmware Version: ES2OA60W
    User Capacity:    320,072,933,376 bytes [320 GB]
    Sector Size:      512 bytes logical/physical
    Rotation Rate:    5400 rpm
    Form Factor:      2.5 inches
    Device is:        In smartctl database [for details use: -P show]
    ATA Version is:   ATA8-ACS T13/1699-D revision 6
    SATA Version is:  SATA 2.6, 3.0 Gb/s
    Local Time is:    Tue Jan 17 23:10:55 2017 SEAST
    SMART support is: Available - device has SMART capability.
    SMART support is: Disabled
    
    SMART Disabled. Use option -s with argument 'on' to enable it.

But when I restart my computer, the SMART check comes back again. Why is that?

My BIOS version is ​1.31, and there is no SMART option in it (only D2D recovery).

^{I have asked this question on ​Super User as well.}

SMART attribute 22 is reported as "Unknown attribute" on recent WDC_WD120EDAZ hard drives.

The SMART attribute 22 is generally called "Helium_Level" on similar models.

Bellow is the SMART information for that device.

smartctl -a /dev/sdl
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.107-Unraid] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD120EDAZ-11F3RA0
Serial Number:    5PJJ7JPD
LU WWN Device Id: 5 000cca 291e3913e
Firmware Version: 81.00A81
User Capacity:    12,000,138,625,024 bytes [12.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Dec 11 11:25:34 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (   87) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (1251) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   127   127   054    Old_age   Offline      -       112
  3 Spin_Up_Time            0x0007   100   100   024    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       6
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   140   140   020    Old_age   Offline      -       15
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       64
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       5
 22 Unknown_Attribute       0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       11
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       11
194 Temperature_Celsius     0x0002   180   180   000    Old_age   Always       -       36 (Min/Max 21/39)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

My PC has an SSD that is not yet in smartctl/smartd database. The report is attached. May be this can help to identify name of unknown attributes ​https://www.thomas-krenn.com/en/wiki/SMART_attributes_of_Intel_SSDs