Custom Query (1359 matches)
Results (7 - 9 of 1359)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #775 | fixed | Unsupported SSD - SAMSUNG MZ7LN512HMJP-00000 | ||
| Description |
Hello Please add SSD SAMSUNG MZ7LN512HMJP-00000 to your database. Hetzner DC setup this disk to servers. Sample data: smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-327.36.3.el7.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG MZ7LN512HMJP-00000
Firmware Version: MAV0100Q
User Capacity: 512,110,190,592 bytes [512 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Dec 5 12:06:41 2016 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 265) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 2
170 Unknown_Attribute -O--CK 100 100 010 - 0
171 Unknown_Attribute -O--CK 100 100 010 - 0
172 Unknown_Attribute -O--CK 100 100 010 - 0
173 Unknown_Attribute PO--CK 100 100 005 - 0
174 Unknown_Attribute -O--CK 100 100 000 - 0
178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0
180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 1638
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
194 Temperature_Celsius -O--CK 047 047 000 - 53
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
233 Media_Wearout_Indicator PO--C- 100 100 000 - 16777215
241 Total_LBAs_Written -O--CK 099 099 000 - 326
242 Total_LBAs_Read -O--CK 100 100 000 - 0
249 Unknown_Attribute -O--CK 099 099 000 - 326
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xdf GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 52 Celsius
Power Cycle Min/Max Temperature: ?/52 Celsius
Lifetime Min/Max Temperature: 40/52 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/70 Celsius
Temperature History Size (Index): 128 (12)
Index Estimated Time Temperature Celsius
13 2016-12-04 14:50 ? -
... ..(113 skipped). .. -
127 2016-12-05 09:50 ? -
0 2016-12-05 10:00 40 *********************
1 2016-12-05 10:10 ? -
... ..( 9 skipped). .. -
11 2016-12-05 11:50 ? -
12 2016-12-05 12:00 52 *********************************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|||
| #1366 | fixed | Please Add ATP SATA III aMLC M.2 2242 Embedded SSD to database | ||
| Description |
please help to add ATP SATA III aMLC M.2 2242 Embedded SSD smart attribute details into database. Thank you! ===================================================================================================
SSD Model name: ATP SATA III aMLC M.2 2242 Embedded SSD
{ "ATP SATA III aMLC M.2 2242 Embedded SSD",
"ATP I-Temp M.2 2242",
"","",
"-v 1,raw48,Raw_Read_Error_Count "
"-v 5,raw48,Reallocated_Sector_Count "
"-v 9,raw24(raw8),Power_On_Hours "
"-v 12,raw48,Power_Cycle_Count "
"-v 14,raw48,Device_Physical_Capacity "
"-v 15,raw48,Device_User_Capacity "
"-v 16,raw48,Initial_Spare_Blocks "
"-v 17,raw48,Remaining_Spare_Blocks_Current "
"-v 100,raw48,Total_Erease_Count "
"-v 160,raw48,Uncorrectable_Sector_Count_RW "
"-v 172,raw48,Total_Block_Erase_Count "
"-v 173,raw48,Max_Erase_Count "
"-v 174,raw48,Pwr_Cycle_Ct_Unexpected "
"-v 175,raw48,Average_Erase_Count "
"-v 181,raw48,Total_Block_Program_Failure "
"-v 187,raw48,Reported_Uncorrectable_Errors "
"-v 194,raw48,Device_Temperature "
"-v 195,raw48,Hardware_ECC_Recovered "
"-v 197,raw48,Current_Pending_Block_Count "
"-v 198,raw48,Offline_Surface_Scan "
"-v 199,raw48,SATA_FIS_CRC_Errors "
"-v 202,raw48,PCT_Drive_Life_Used "
"-v 205,raw48,Thermal_Asperity_Rate_TAR "
"-v 231,raw48,Controller_Temperature "
"-v 234,raw48,Total_Sector_Read_from_NAND "
"-v 235,raw48,Total_Sector_Write_to_Device "
"-v 241,raw48,Total_Sector_Write_to_NAND "
"-v 242,raw48,Total_Sector_Read_from_Device "
"-v 248,raw48,PCT_Drive_Life_Remaining "
"-v 249,raw48,Spare_Block_Remaining "
},
|
|||
| #1717 | fixed | Please add ATP SATA III aMLC M.2 2280 Embedded SSD to database | ||
| Description |
Please help adding ATP SATA III aMLC M.2 2280 Embedded SSD smart attribute details into database. Thank you! |
|||
Note:
See TracQuery
for help on using queries.
