Custom Query (1414 matches)
Results (73 - 75 of 1414)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #1392 | fixed | Patch to mark Seagate Archive HDD as SMR | ||
| Description |
The Seagate Archive HDD are SMR drives according to manufacturer specs: https://www.seagate.com/www-content/product-content/hdd-fam/seagate-archive-hdd/en-us/docs/archive-hdd-dS1834-3-1411us.pdf Unfortunately, smartmontools SVN rev 5115 doesn't recognize them as zoned device, because the drive doesn't report this: # ./smartctl -i /dev/sdb smartctl 7.2 2020-11-09 r5115 [x86_64-linux-5.8.0-0.bpo.2-amd64] (CircleCI) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Archive HDD Device Model: ST8000AS0002-1NA17Z Serial Number: Z840X424 LU WWN Device Id: 5 000c50 0938ab626 Firmware Version: AR17 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Nov 13 19:39:10 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled relevant part from "smartctl --identify=wb /dev/sdb": 69 - 0x0000 Additional support 69 15 0 CFast specification supported 69 14 0 Deterministic data after trim supported 69 13 0 LPS Alignment Error Reporting Control supported 69 12 0 DCO IDENTIFY/SET DMA supported [OBS-ACS-3] 69 11 0 READ BUFFER DMA supported 69 10 0 WRITE BUFFER DMA supported 69 9 0 SET MAX SET PASSWORD/UNLOCK DMA supported [OBS-ACS-3] 69 8 0 DOWNLOAD MICROCODE DMA supported 69 7 0 Reserved for IEEE 1667 69 6 0 Optional ATA device 28-bit commands supported 69 5 0 Trimmed LBA range(s) returning zeroed data supported 69 4 0 Device encrypts all user data 69 3 0 Extended number of user addressable sectors supported 69 2 0 All write cache is non-volatile 69 1:0 0x0 Zoned Capabilities following small patch adds SMR the name of the model family: --- drivedb.h.orig 2020-11-01 16:58:02.000000000 +0100
+++ drivedb.h 2020-11-13 19:35:43.609934314 +0100
@@ -4241,7 +4241,7 @@
"-v 18,raw48,Unknown_Seagate_Attrib " // ST16000NE000
"-v 240,msec24hour32"
},
- { "Seagate Archive HDD", // tested with ST8000AS0002-1NA17Z/AR13
+ { "Seagate Archive HDD (SMR)", // tested with ST8000AS0002-1NA17Z/AR13
"ST[568]000AS00[01][12]-.*",
"", "", ""
},
|
|||
| #1405 | fixed | Please add Seagate ST1500LM003 to the database | ||
| Description |
This drive is from the "FreePlay" Series. Unfortunately, I could not find a manual or specifications from Seagate. Drive was installed inside a FreeAgent GoFlex Enclosure. Based on size (thickness) and age, I would outrule SMR :-) Please find attached the output of smartctl -q noserial -x /dev/sdX |
|||
| #1428 | fixed | Patch to support more JMicron JMS576 | ||
| Description |
I recently received a no-name "USB3.1 TO M.2 NGFF SSD Enclosure" with a JMicron JMS576 inside. These Chips are apparently sold with different USB IDs, following patch adds 152d:0576 USB-ID: --- drivedb.h.5170 2021-01-20 05:38:15.525969579 +0100
+++ drivedb.h 2021-01-20 05:50:55.741948033 +0100
@@ -5785,7 +5785,7 @@
"-d sat"
},
{ "USB: ; JMicron JMS576", // USB3.1->SATA
- "0x152d:0x1576",
+ "0x152d:0x[01]576",
"", // 0x0204, ICY BOX IB-223U3a-B
"",
"-d sat"
|
|||
