Custom Query (1566 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (496 - 498 of 1566)

Ticket Resolution Summary Owner Reporter
#89 fixed Use log directory to check for old error/self-test log support Christian Franke Christian Franke
Description

Smartctl and smartd assume that the old SMART error log (log address 0x01) is supported if an error-logging capability bit in IDENTIFY or SMART data is set. Same applies to old SMART self-test log (log address 0x06). These logs were introduced in ATA-5 and are now outdated because 48-bit LBA addresses are not supported. Recent devices may only support the newer 48-bit capable logs (extended comprehensive error-log, extended self-test log) introduced in ATA-6.

smartctl -a ... prints misleading messages then:

Error SMART Error Log Read failed: Input/output error
Smartctl: SMART Error Log Read Failed
Error SMART Error Self-Test Log Read failed: Input/output error
Smartctl: SMART Self Test Log Read Failed

Misleading kernel messages may appear during smartd startup:

... kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
... kernel: hda: drive_cmd: error=0x04 { DriveStatusError }
... kernel: ide: failed opcode was: 0xb0
... smartd[...]: Device: /dev/hda, Read SMART Self Test Log Failed
... smartd[...]: Device: /dev/hda, no SMART Self-Test log; remove -l selftest Directive from smartd.conf

(smartctl -x ... is not affected)

Smartctl and smartd should read the log directory (log address 0x00) to check whether the old logs are still supported and print an "unsupported" message if not.

#93 wontfix os_linux.cpp: Use SG_IO instead of deprecated SCSI ioctl somebody Christian Franke
Description

Some controller specific functions in os_linux.cpp still use some old SCSI pass-through ioctl. This may result in syslog messages like:

... kernel: [...] program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO

SG_IO should be used if supported.

#94 fixed Build fails if source was downloaded via ViewVC Christian Franke Christian Franke
Description

ViewVC allows to download the source as a tarball. A build from the tarball fails because the SVN Id strings are not expanded.

​http://smartmontools.svn.sourceforge.net/viewvc/smartmontools/trunk/smartmontools/

Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.