Custom Query (1463 matches)
Results (304 - 306 of 1463)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #1707 | fixed | Please add to SMART database - Nextron NForce SSD (NFORCE 25625 - SSZS13) | ||
| Description |
These are some China (PRC) based cheap SSDs being sold in India. By a company called Nextron under model / brand name called NForce. Surprisingly, in spite of being cheap they have 5 year warranty. Here is output of: smartctl -x /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.7-arch1-1] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: NFORCE 25625 - SSZS13
Serial Number: SSZS131ZSD2504605
Firmware Version: V0915A0
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-3 T13/2161-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Mar 26 08:30:59 2023 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SCT capabilities: (0x0001) SCT Status supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
9 Power_On_Hours -O--CK 100 100 050 - 17
12 Power_Cycle_Count -O--CK 100 100 050 - 73
160 Unknown_Attribute -O--CK 100 100 050 - 0
161 Unknown_Attribute PO--CK 100 100 050 - 100
163 Unknown_Attribute -O--CK 100 100 050 - 14
164 Unknown_Attribute -O--CK 100 100 050 - 61
165 Unknown_Attribute -O--CK 100 100 050 - 2
166 Unknown_Attribute -O--CK 100 100 050 - 1
167 Unknown_Attribute -O--CK 100 100 050 - 1
168 Unknown_Attribute -O--CK 100 100 050 - 5050
169 Unknown_Attribute -O--CK 100 100 050 - 100
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0
177 Wear_Leveling_Count -O--CK 100 100 050 - 0
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
192 Power-Off_Retract_Count -O--CK 100 100 050 - 33
194 Temperature_Celsius -O---K 100 100 050 - 45
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
197 Current_Pending_Sector -O--CK 100 100 050 - 0
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
232 Available_Reservd_Space -O--CK 100 100 050 - 100
241 Total_LBAs_Written ----CK 100 100 050 - 3086
242 Total_LBAs_Read ----CK 100 100 050 - 3859
245 Unknown_Attribute -O--CK 100 100 050 - 1332
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 88 Current Device Internal Status Data log
0x25 GPL R/O 32 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 17 -
# 2 Extended offline Completed without error 00% 3 -
# 3 Short offline Completed without error 00% 3 -
Selective Self-tests/Logging not supported
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 45 Celsius
Power Cycle Min/Max Temperature: 45/45 Celsius
Lifetime Min/Max Temperature: 38/45 Celsius
Specified Max Operating Temperature: 100 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Data Table command not supported
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 73 --- Lifetime Power-On Resets
0x01 0x010 4 17 --- Power-on Hours
0x01 0x018 6 202277925 --- Logical Sectors Written
0x01 0x020 6 2076178 --- Number of Write Commands
0x01 0x028 6 252923209 --- Logical Sectors Read
0x01 0x030 6 2118746 --- Number of Read Commands
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x000a 4 6 Device-to-host register FISes sent due to a COMRESET
Please consider adding. Thank you. |
|||
| #1258 | duplicate | Error Counter logging not supported (SAMSUNG MZILT800HAHQ0D3) | ||
| Description |
smartctl is not reporting disk-level checks and not running self tests. Getting below error: #smartctl -a -d megaraid,1 /dev/sdb smartctl 7.0 2018-12-30 r4883 (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: SAMSUNG Product: MZILT800HAHQ0D3 Revision: DWF8 Compliance: SPC-5 User Capacity: 800,166,076,416 bytes [800 GB] Logical block size: 512 bytes Physical block size: 4096 bytes LU is resource provisioned, LBPRZ=1 Rotation Rate: Solid State Device Form Factor: 2.5 inches Device type: disk Transport protocol: SAS (SPL-3) Local Time is: Wed Oct 30 04:17:00 2019 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 33 C Drive Trip Temperature: 70 C Elements in grown defect list: 0 Error Counter logging not supported Device does not support Self Test logging i have tried enabling with --smart=on --saveauto=on,-T permissive but nothing works. |
|||
| #146 | fixed | smartctl does not work on arbitrary symlinks to devices | ||
| Description |
$ ln -s /dev/sda /tmp/foo $ smartctl /tmp/foo smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net /tmp/foo: Unable to detect device type ... $ smartctl /dev/sda # this works fine $ smartctl -a /dev/block/8:0 # FAIL, as above $ smartctl /dev/disk/by-path/pci-0000\:00\:1f.2-scsi-0\:0\:0\:0 # this works fine, too Even if all the links point to /dev/sda, only some of them can be specified as arguments to smartctl - which does not make sence IMHO. I would expect any symbolic link (which may be nested quite deep) that finally resolves to a device should allow successful execution of smartctl. In my use case, I have quite a bunch of disks that are used for experiments and switched between machines regularily. Therefore I set up symlinks like /data/dev/disk1 -> /dev/disk/by-id/ABC-123456 with a fixed mapping of the disk$i names and prefer to access the devices via /data/dev/disk$i (and mount them to /data/disk$i) so I don't have to care which /dev/sdX name it currently has (and I don't accidentally access the wrong one - I don't care about the port where it is connected but about the actual physical disk). Using /dev/disk/by-id/ABC-123456 directly is quite cumbersome because they are quite long, look different from vendor to vendor and are not contiguous. UUIDs or something similar is not useful either because the disks get repartitioned and filesystems get recreated regularily. While sfdisk, mkfs, mount, hdparm, ... work in this setup, smartctl does not. Andreas |
|||
