Custom Query (1451 matches)
Results (28 - 30 of 1451)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #644 | fixed | Missing SMART attributes for Crucial MX200 | ||
| Description |
The smartmontools drivedb, version 6.4, lacks information on the Crucial CT250MX200 drive. It appears the expression in the drivedb.h file is
Crucial_CT(200|256|500|512|1000|1024)MX200SSD
while is should be
Crucial_CT(200|250|256|500|512|1000|1024)MX200SSD
I've attached the output of |
|||
| #1692 | worksforme | Seagate DKS2E-H4R0SS is not working correctly with smartctl | ||
| Description |
~]$ sudo smartctl -a /dev/sdg
smartctl 7.1 2020-04-05 r5049 [x86_64-linux-4.18.0-425.3.1.el8.x86_64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: SEAGATE
Product: DKS2E-H4R0SS
Revision: 7FA6
Compliance: SPC-3
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Logical block size: 512 bytes
LU is fully provisioned
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000c50085880b2f
Serial number: Z1ZB2BGT0000R627VEN0
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Fri Feb 3 09:09:33 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 0 C
Drive Trip Temperature: 0 C
Elements in grown defect list: 2
Error Counter logging not supported
[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging
[bartosz@nas ~]$ scsi_temperature /dev/sdf
sg_logs -t /dev/sdf
error opening file: /dev/sdf: Permission denied
sg_logs failed: Permission denied
~]$ sudo scsi_temperature /dev/sdg
sg_logs -t /dev/sdg
SEAGATE DKS2E-H4R0SS 7FA6
Current temperature = 43 C
Reference temperature = 68 C
~]$
~]$ lspci |grep -i sas
02:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)
This fault is similar #1346. Witch version working property with my SAS Disk? |
|||
| #1207 | invalid | WD Red 6TB - WDC WD60EFAX-68SHWN0 reports wrong self-test polling time recommendation | ||
| Description |
The duration of the long (extended) self-test is reported as 7 minutes. Running the long self-test with smartctl (under linux) indeed takes 7 minutes. Running the extended self test under W7 with Data Lifeguard Diagnostics took about 4 hours and 30 minutes (same disk of course). I also see that the conveyance test has the same recommended duration as the short self-test, which is unusual. I didn't run these tests on either systems. Is this a bug in smartctl or in the disk? |
|||
