Custom Query (1546 matches)
Results (274 - 276 of 1546)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #1074 | worksforme | add to drivedb: Unknown USB bridge [0x1058:0x25a0 (0x1004)] | ||
| Description |
David Schiller reported via database mailing list:
david@pi:~$ sudo smartctl /dev/sda smartctl 6.6 2016-05-31 r4324 [armv7l-linux-4.9.59-v7+] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org /dev/sda: Unknown USB bridge [0x1058:0x25a0 (0x1004)] david@pi:~$ sudo smartctl /dev/sda -d sat -q noserial -a smartctl 6.6 2016-05-31 r4324 [armv7l-linux-4.9.59-v7+] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Elements / My Passport (USB, AF) Device Model: WDC WD10JMVW-11AJGS4 Firmware Version: 01.01A01 User Capacity: 1.000.204.886.016 bytes [1,00 TB] .. See file attached for the whole report. |
|||
| #1077 | worksforme | Missing DB entry for Seagate Backup Plus 5TB red | ||
| Description |
This drive works perfectly with the "sat" driver. /dev/sdd: Unknown USB bridge [0x0bc2:0xab30 (0x108)] Please specify device type with the -d option. In case it's useful, this is what lsusb says about this disk: Bus 009 Device 004: ID 0bc2:ab30 Seagate RSS LLC [854/6863]
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x0bc2 Seagate RSS LLC
idProduct 0xab30
bcdDevice 1.08
iManufacturer 1 Seagate
iProduct 2 BUP RD
iSerial 3 NA7TWFV1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 121
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 224mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 98 [788/6863]
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Command pipe (0x01)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
MaxStreams 32
Status pipe (0x02)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Data-in pipe (0x03)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 7
MaxStreams 32
Data-out pipe (0x04)
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 22
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000f0e
Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 32 micro seconds
Device Status: 0x0000
(Bus Powered)
|
|||
| #1078 | duplicate | smart not supported on external hdd maxtor m3 ? | ||
| Description |
The Maxtor M3 2,5" 4TB external HDD is listed as supported: https://www.smartmontools.org/wiki/Supported_USB-Devices I tested: sudo smartctl -a /dev/sdb smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-33-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org /dev/sdb: Unknown USB bridge [0x0bc2:0x61b7 (0x000)] Please specify device type with the -d option. Use smartctl -h to get a usage summary sudo smartctl -d sat -a /dev/sdb [sudo] Passwort für chuck: smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-33-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org Read Device Identity failed: scsi error unsupported field in scsi command A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. sudo smartctl -d sat -T permissive -a /dev/sdb smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-33-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org Read Device Identity failed: scsi error unsupported field in scsi command === START OF INFORMATION SECTION === Device Model: [No Information Found] Serial Number: [No Information Found] Firmware Version: [No Information Found] Device is: Not in smartctl database [for details use: -P showall] ATA Version is: [No Information Found] Local Time is: Mon Aug 27 20:44:01 2018 CEST SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. I need smart on my device, can it be solved? best wishes |
|||
Note:
See TracQuery
for help on using queries.
