Custom Query (1386 matches)
Results (22 - 24 of 1386)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #553 | invalid | smartctrl labels seemingly good value pre-fail (windows and linux) | ||
| Description |
When I run smartctl on my new Toshiba 1TB drive many of the smart parameters are labeled are labelled pre-fail which doesn't seem to make sense from the values listed. Am I doing something wrong, is my drive oddball? Here are the results: C:\Program Files\smartmontools\bin>smartctl --all --device=ata /dev/sda
smartctl 6.4 2015-06-04 r4109 [x86_64-w64-mingw32-win7-sp1] (sf-6.4-1)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABD...
Device Model: TOSHIBA MQ01ABD100
Serial Number: 35UYTO2BT
LU WWN Device Id: 5 000039 62208d390
Firmware Version: AX1P1A
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Jun 08 12:12:57 2015 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 248) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1707
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 52
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 192
10 Spin_Retry_Count 0x0033 101 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 46
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 13
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 5
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 2641
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Min/Max 21/46)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
222 Loaded_Hours 0x0032 100 100 000 Old_age Always - 157
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 186
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA
_of_first_error
# 1 Extended offline Completed without error 00% 190 -
# 2 Short offline Completed without error 00% 187 -
# 3 Extended offline Completed without error 00% 113 -
# 4 Extended offline Completed without error 00% 6 -
# 5 Short offline Completed without error 00% 3 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|||
| #596 | duplicate | supported device database | ||
| Description |
0x4971:0x8017 (0x8104) Works with -d sat and with -d sat,12 It's a Rosewill Armer RX307-PU3-35B. It supports USB3 and UASP, and it appears so far to be stable. $25 at Newegg. So, it seems that I finally bought a supported device that also supports USB3 and UASP, and that has already outlasted the others I've tried: MediaSonic ProBox K32-SU3 Purex Technology |
|||
| #598 | worksforme | Windows hangs after smartd is started | ||
| Description |
Hello, 6.4.1 blocks the T3600 DELL PC (over the keyboard response) when the service starts, when the auto -d option is specified in the smartd.conf If the debug (smartd -d) below smartd 6.4 2015-06-04 r4109 [x86_64-w64-mingw32-win7-sp1] (sf-6.4-1) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org Opened configuration file C:/Program Files/SmartMon.old/smartd.conf Configuration file C:/Program Files/SmartMon.old/smartd.conf was parsed, found DEVICESCAN, scanning devices Device: /dev/sda [SAT], opened Device: /dev/sda [SAT], WDC WD5000AAKX-75U6AA0, S/N:WD-WCC2EU802806, WWN:5-0014ee-2b29c36c5, FW:19.01H19, 500 GB Device: /dev/sda [SAT], found in smartd database: Western Digital Blue Device: /dev/sda [SAT], not capable of SMART Health Status check CHECK POWER MODE: incomplete response, ATA output registers missing Device: /dev/sda [SAT], no ATA CHECK POWER STATUS support, ignoring -n Directive Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list. Device: /dev/sdb [SAT], opened Device: /dev/sdb [SAT], WDC WD5000AAKX-75U6AA0, S/N:WD-WCC2EU614318, WWN:5-0014ee-207f17163, FW:19.01H19, 500 GB Device: /dev/sdb [SAT], found in smartd database: Western Digital Blue Device: /dev/sdb [SAT], not capable of SMART Health Status check CHECK POWER MODE: incomplete response, ATA output registers missing Device: /dev/sdb [SAT], no ATA CHECK POWER STATUS support, ignoring -n Directive Device: /dev/sdb [SAT], is SMART capable. Adding to "monitor" list. Device: /dev/csmi0,0, opened Device: /dev/csmi0,0, packet devices [this device CD/DVD] not SMART capable Unable to register ATA device /dev/csmi0,0 at line 1 of file C:/Program Files/SmartMon.old/smartd.conf Device: /dev/csmi1,0, opened Device: /dev/csmi1,0, not ATA, no IDENTIFY DEVICE Structure Unable to register ATA device /dev/csmi1,0 at line 1 of file C:/Program Files/SmartMon.old/smartd.conf Device: /dev/csmi1,1, opened Device: /dev/csmi1,1, WDC WD5000AAKX-75U6AA0, S/N:WD-WCC2EU614318, WWN:5-0014ee-207f17163, FW:19.01H19, 500 GB Device: /dev/csmi1,1, found in smartd database: Western Digital Blue Device: /dev/csmi1,1, is SMART capable. Adding to "monitor" list. Monitoring 3 ATA and 0 SCSI devices Device: /dev/sda [SAT], opened ATA device After this line is completely blocked windows, windows of a sudden stop is needed to stop :( If the ATA option is indicated in the smartd.conf, the drives are not recognized (it has no windows blocking) |
|||
Note:
See TracQuery
for help on using queries.
