Custom Query (1434 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (223 - 225 of 1434)

Ticket Resolution Summary Owner Reporter
#956 fixed add to existing drivedb entry: ST1000NM0055 Stefan
Description

Hello,

today I tested trunk 4648 and the json output. I tested it with a Seagate ST1000NM0055-1V410C and get a json-output like "in_smartctl_database" : false, but when i looking in https://www.smartmontools.org/browser/trunk/smartmontools/drivedb.h for 'ST1000NM0055' i found it, maybe there is some problems with drivedb-checks?

btw: if you need help with json output I've SATA-HDD, SAS-HDD/SSD to help you with the output

#957 invalid add to drivedb: ST6000NM0095 Stefan
Description

smartctl -x output

Datasheet: https://www.seagate.com/www-content/datasheets/pdfs/ent-cap-3-5-hdd-data-sheetDS1882-3-1610US-en_US.pdf

#960 worksforme add WD My Passport 25E2 WDC WD40NMZW-11GX6S1 Gary Rubin
Description
# smartctl -i /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-4-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/sdb: Unknown USB bridge [0x1058:0x25e2 (0x4004)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary
# smartctl -d sat -i /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-4-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD40NMZW-11GX6S1
Serial Number:    WD-WX21D47E8DAD
LU WWN Device Id: 5 0014ee 6b2735659
Firmware Version: 01.01A01
User Capacity:    4,000,753,472,000 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-3 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Dec 28 14:52:08 2017 MST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.