Custom Query (1542 matches)
Results (64 - 66 of 1542)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #678 | fixed | Seagate ST8000NM0075 is not working correctly with smartctl/smartd | ||
| Description |
It appears that the Seagate ST8000NM0075 behind a LSI 9300-8i running FW P10 doesn't display much SMART information. Running command: smartctl -t short /dev/da0 smartctl 6.4 2015-06-04 r4109 [FreeBSD 10.3-RELEASE amd64] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org Short Background Self Test has begun Use smartctl -X to abort test Works just fine... but.. smartctl -a shows: smartctl 6.4 2015-06-04 r4109 [FreeBSD 10.3-RELEASE amd64] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: SEAGATE Product: ST8000NM0075 Revision: E001 Compliance: SPC-4 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Logical block size: 512 bytes Physical block size: 4096 bytes LB provisioning type: unreported, LBPME=0, LBPRZ=0 Rotation Rate: 7200 rpm Form Factor: 3.5 inches Logical Unit id: 0x5000c50XXXXXXXX Serial number: ZA10XXXXXXXXXXXXX Device type: disk Transport protocol: SAS (SPL-3) Local Time is: Tue Mar 29 20:57:14 2016 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Elements in grown defect list: 0 Error Counter logging not supported Device does not support Self Test logging |
|||
| #679 | fixed | Add to smartmontools-database SAMSUNG-MZ7PC128HAFU-000L1 | ||
| #680 | wontfix | "LifeTime(hours)" wrap around in SMART's self-test log | ||
| Description |
Hi I've just seen that on a few quite old disks, the 16bit counter for "LifeTime(hours)" wraps around after a few years, even though the power on hours don't. I'm not sure if this is caused the SMART specs or a problem with querying the raw values within smartmontools, but it would be nice to have a fix in smartmontools to have a uniformly growing number of LifeTime in the logs - especially as we use the difference between the latest entry and attribute no 9 to determine if a regular check was not performed. What do you think? Cheers Carsten smartctl 6.5 2016-04-02 r4276 [x86_64-linux-3.18.26-atlas] (daily-20160402)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Ultrastar A7K1000
Device Model: Hitachi HUA721075KLA330
Serial Number: GTE200P8G1Z07E
LU WWN Device Id: 5 000cca 215c0e504
Firmware Version: GK8OA70M
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 1
Local Time is: Mon Apr 4 13:07:04 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 249) Self-test routine in progress...
90% of test remaining.
Total time to complete Offline
data collection: (11471) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 191) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 130 130 054 Pre-fail Offline - 151
3 Spin_Up_Time 0x0007 118 118 024 Pre-fail Always - 542 (Average 472)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 82
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 2
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 132 132 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 091 091 000 Old_age Always - 66329
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 82
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 868
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 868
194 Temperature_Celsius 0x0002 166 166 000 Old_age Always - 36 (Min/Max 8/47)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 676 -
# 2 Extended offline Completed without error 00% 508 -
# 3 Extended offline Completed without error 00% 340 -
# 4 Extended offline Completed without error 00% 172 -
# 5 Extended offline Completed without error 00% 4 -
# 6 Extended offline Completed without error 00% 65372 -
# 7 Extended offline Completed without error 00% 65205 -
# 8 Extended offline Completed without error 00% 64868 -
# 9 Extended offline Completed without error 00% 64700 -
#10 Extended offline Completed without error 00% 64532 -
#11 Extended offline Completed without error 00% 64484 -
#12 Extended offline Completed without error 00% 12930 -
#13 Extended offline Completed without error 00% 12762 -
#14 Extended offline Completed without error 00% 12594 -
#15 Extended offline Completed without error 00% 12426 -
#16 Extended offline Completed without error 00% 12258 -
#17 Extended offline Completed without error 00% 12090 -
#18 Extended offline Completed without error 00% 11922 -
#19 Extended offline Completed without error 00% 11754 -
#20 Extended offline Completed without error 00% 11586 -
#21 Extended offline Completed without error 00% 11418 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|||
Note:
See TracQuery
for help on using queries.
