Custom Query (1560 matches)

I have several USB drives from different vendors, including WD.

I have found that for a particular drive model, smartctl -n standby nonetheless wakes the drive.

This is a WD Elements Desktop 4TB drive.

Device Model: WDC WD40EMAZ-11LW3B0

Full smartctl -x attached. I am happy to run debugs, etc. over the next week or so, after which I may have to return the drive as unfit.

Please add : Smartbuy PS5013-2280T

Similar to #1092 closed defect (duplicate), Seagate Backup Plus Hub 8 TB

With a fresh svn copy, I ran:

# ./smartctl -a /dev/sdb
smartctl 7.2 2020-06-24 r5073 [x86_64-linux-4.19.0-6-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported field in scsi command

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

#

Like #1092, -d scsi got me useful data. I did not try the other options shown in #1092.

# ./smartctl -a -d scsi /dev/sdb
smartctl 7.2 2020-06-24 r5073 [x86_64-linux-4.19.0-6-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               Seagate
Product:              BUP Portable
Revision:             0004
Compliance:           SPC-4
User Capacity:        5,000,981,077,504 bytes [5.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
Logical Unit id:      0x5000000000000001
Serial number:        00<edited!!>
Device type:          disk
Local Time is:        Tue Jun 30 12:18:20 2020 MDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Disabled
Temperature Warning:  Disabled or Not Supported

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported

Device does not support Self Test logging
#

The device does use the aus driver:

# lsusb -t
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/2p, 12M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/2p, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/2p, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/2p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/10p, 480M
    |__ Port 5: Dev 9, If 0, Class=Mass Storage, Driver=uas, 480M
#