Custom Query (1560 matches)

Here’s some output that doesn’t look right:

# smartctl -l xselftest /dev/sdb
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.86-gentoo] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Self-test routine in progress 10%      9479         -
# 2  Extended offline    Self-test routine in progress 10%      9479         -
# 3  Extended offline    Self-test routine in progress 10%      9479         -
# 4  Extended offline    Self-test routine in progress 10%      9479         -
# 5  Extended offline    Self-test routine in progress 10%      9479         -
# 6  Extended offline    Self-test routine in progress 20%      9479         -
# 7  Extended offline    Self-test routine in progress 20%      9479         -
# 8  Extended offline    Self-test routine in progress 20%      9479         -
# 9  Extended offline    Self-test routine in progress 20%      9479         -
#10  Extended offline    Self-test routine in progress 20%      9479         -
#11  Extended offline    Self-test routine in progress 20%      9479         -
#12  Extended offline    Self-test routine in progress 20%      9479         -
#13  Extended offline    Self-test routine in progress 20%      9479         -
#14  Extended offline    Self-test routine in progress 20%      9479         -
#15  Extended offline    Self-test routine in progress 20%      9479         -
#16  Extended offline    Self-test routine in progress 20%      9479         -
#17  Extended offline    Self-test routine in progress 20%      9479         -
#18  Extended offline    Self-test routine in progress 30%      9478         -
#19  Extended offline    Self-test routine in progress 10%      9479         -

It appears to be showing the same test 19 times (except for 18, curiously), and none of them claim to have finished. I definitely didn’t start 18 tests in the same hour! This was also a long time ago; the test isn’t running right now (in fact my power on hours are now at 9493), yet it says they’re all in progress, too.

Output for 'smartctl -x /dev/sdX' is attached.

Attempted to add the following line to https://www.smartmontools.org/wiki/Supported_USB-Devices :

|| Rosewill RX234 SATA III USB 3.0 docking station || JMicron || 0x152d:0x2578 || JMicron Technology Corp. / JMicron USA Technology Corp. USB to SATA bridge || -d sat || Linux 4.19 || bchociej || ||

Upon either submitting or attempting to review changes, the following error was displayed:

Trac detected an internal error: DataError: (1406, "Data too long for column 'request' at row 1")