Custom Query (1552 matches)
Results (361 - 363 of 1552)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #1272 | duplicate | Missing SMART data from hpsa SAS devices (HP EG0900FBLSK) | ||
| Description |
NEW$ sudo ./smartctl -x -d scsi+cciss,0 -r ioctl /dev/sg0 < smartctl 7.1 2019-12-13 r5004 [x86_64-linux-4.18.13-geo1.ol6.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 === START OF INFORMATION SECTION === Vendor: HP Product: EG0900FBLSK Revision: HPD8 Compliance: SPC-3 cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 User Capacity: 900,185,481,216 bytes [900 GB] Logical block size: 512 bytes cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 Rotation Rate: 10000 rpm Form Factor: 2.5 inches cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 Logical Unit id: 0x5000c5004bc2745b cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 Serial number: 6XS22P5S0000B235E1D7 Device type: disk Transport protocol: SAS (SPL-3) Local Time is: Fri Dec 20 14:21:58 2019 PST cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 Read Cache is: Enabled Writeback Cache is: Enabled === START OF READ SMART DATA SECTION === cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 SMART Health Status: OK Current Drive Temperature: 0 C Drive Trip Temperature: 0 C cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 Elements in grown defect list: 0 Error Counter logging not supported cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 Device does not support Self Test logging Device does not support Background scan results logging OLDsmartctl 5.43 2016-09-28 r4347 [x86_64-linux-4.18.13-geo1.ol6.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
/dev/sg0 [cciss_disk_00] [SCSI]: Device open changed type from 'sat,auto' to 'cciss'
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
Vendor: HP
Product: EG0900FBLSK
Revision: HPD8
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
User Capacity: 900,185,481,216 bytes [900 GB]
Logical block size: 512 bytes
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
Logical Unit id: 0x5000c5004bc2745b
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
Serial number: 6XS22P5S0000B235E1D7
Device type: disk
Transport protocol: SAS
Local Time is: Fri Dec 20 14:25:23 2019 PST
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
Device supports SMART and is Enabled
Temperature Warning Enabled
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
SMART Health Status: OK
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
Current Drive Temperature: 21 C
Drive Trip Temperature: 65 C
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
Manufactured in week 10 of year 2012
Specified cycle count over device lifetime: 10000
Accumulated start-stop cycles: 60
Specified load-unload count over device lifetime: 300000
Accumulated load-unload cycles: 1513
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
Elements in grown defect list: 0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
Vendor (Seagate) cache information
Blocks sent to initiator = 773829256
Blocks received from initiator = 4244589878
Blocks read from cache and sent to initiator = 4231434536
Number of read and write commands whose size <= segment size = 3949760769
Number of read and write commands whose size > segment size = 39300
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
Vendor (Seagate/Hitachi) factory information
number of hours powered up = 60047.63
number of minutes until next internal SMART test = 59
Vendor (Seagate/Hitachi) factory lpage: unknown parameter code [0x9]
Vendor (Seagate/Hitachi) factory lpage: unknown parameter code [0xe]
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 782369620 0 4012475.671 0
write: 0 0 0 0 0 28874.763 0
verify: 0 0 0 3275645858 0 476.546 0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
Non-medium error count: 162
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background short Completed - 0 - [- - -]
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
Long (extended) Self Test duration: 7250 seconds [120.8 minutes]
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
Background scan results log
Status: scan is active
Accumulated power on time, hours:minutes 60047:38 [3602858 minutes]
Number of background scans performed: 2229, scan progress: 2.06%
Number of background medium scans performed: 2229
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
status=0
Protocol Specific port log page for SAS SSP
relative target port id = 1
generation code = 0
number of phys = 1
phy identifier = 0
attached device type: end device
attached reason: unknown
reason: hard reset
negotiated logical link rate: phy enabled; 6 Gbps
attached initiator port: ssp=1 stp=1 smp=1
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000c5004bc27459
attached SAS address = 0x5001438010eef5e0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization = 18
Phy reset problem = 0
Phy event descriptors:
Invalid word count: 0
Running disparity error count: 0
Loss of dword synchronization count: 18
Phy reset problem count: 0
relative target port id = 2
generation code = 0
number of phys = 1
phy identifier = 1
attached device type: no device attached
attached reason: unknown
reason: unknown
negotiated logical link rate: phy enabled; 1.5 Gbps
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000c5004bc2745a
attached SAS address = 0x0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization = 0
Phy reset problem = 0
Phy event descriptors:
Invalid word count: 0
Running disparity error count: 0
Loss of dword synchronization count: 0
Phy reset problem count: 0
|
|||
| #1275 | invalid | INTEL SSDSC2BF180A5L: Self-tests always abort immediately | ||
| Description |
Hi, I have been using an INTEL SSDSC2BF180A5L for years with no problems, but both long and short self-tests don't work - they always immediately abort: Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 00% 14239 - # 2 Short offline Aborted by host 00% 14233 - # 3 Short offline Aborted by host 00% 14232 - # 4 Extended offline Aborted by host 00% 14232 - # 5 Extended offline Aborted by host 00% 14232 - This happens within seconds of ordering the test. |
|||
| #1279 | duplicate | update-smart-drivedb: Older releases return *** BAD signature *** | ||
| Description |
When calling update-smart-drivedb from smartmontools-6.6, it always fails: /usr/sbin/update-smart-drivedb: /usr/share/smartmontools/drivedb.h.error.raw: * BAD signature * It currently affectects version 6.6, but starting with year 2021, it will affect 7.0 and 7.1 as well. Digging deeper into this problem by sh -x, I see: ++ gpg --quiet --no-secmem-warnin --batch --no-tty --homedir=/usr/share/smartmontools/.gnupg.12981.tmp --verify /usr/share/smartmontools/drivedb.h.new.raw.asc /usr/share/smartmontools/drivedb.h.new.raw + out='gpg: Signature made Sat Dec 28 22:44:15 2019 CET gpg: using RSA key EA74AB25721042C5 gpg: Can'\t check signature: No public key' + rc=1 There is a problem: smartmontools-6.6 hardcodes requirement of "Smartmontools Signing Key (through 2018)". But drivedb.h.raw.asc in the branch RELEASE_6_6_DRIVEDB is signed by "Smartmontools Signing Key (through 2020)". This cannot work. drivedb.h.raw.asc in the branch RELEASE_6_6_DRIVEDB has to use "Smartmontools Signing Key (through 2018)" forever. You have to extend validity period of this signing key, and then use that key for signing of this branch. Similarly, once RELEASE_7_0_DRIVEDB will be created, it has to be signed by "Smartmontools Signing Key (through 2020)" forever. And if it will not be created, you will go into unfixable problems in 2021 (version 7.0 will require a different signature than a future 7.3). In general, replacement of signing key every two years is not smart. It does not increase security, but paradoxically it decreases the security. New signing key has no trusted developer signatures, no trusted ring, so there are no way to verify that the key was created by legitimate developers. That is why I recommend to stop creating new keys every two years. Please create a well established trusted key, and when it will be required (e. g. signature considered as weak), add a signature to it. Developers should sign this key by their private keys, so people who have them in the trust ring could immediately trust this key. To decrease problems with future compatibility (e. g. extended key validity period, added signature), the script should update the key from the GPG network: gpg --recv-keys {key_id} This will also ensure security, as the possibly revoked key will be refused. |
|||
