Custom Query (1455 matches)
Results (262 - 264 of 1455)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #818 | fixed | Add ADATA SX930 to database | ||
| Description |
Please add ADATA SX930 SSD disk to the DB. It's based on JMicron 670H. ADATA S.M.A.R.T. attributes description can be found in their tool manual: http://www.adata.com/AppStore/ADATA%20SSD%20Toolbox_UserGuide_V10_EN.pdf |
|||
| #822 | fixed | The -q noserial option doesnt sanitise SAS address in some places | ||
| Description |
When using "smartctl -q noserial" to create anonymised output, I found that reports from SAS drives containing the "Protocol Specific port log page for SAS SSP" output showed both the drive SAS address and the HBA port SAS address. See https://www.smartmontools.org/wiki/Examples_HUS154545VLS300 for an example of this output I could duplicate this example with: smartctl /dev/bus/0 -d megaraid,0 -x -q noserial |
|||
| #823 | fixed | Add CoreRise Comay BladeDrive E28 800GB | ||
| Description |
Please add it to the smartctl database. It's a PCI-Express SSD card. All missing SMART parameters are attached. smartctl 6.6 2017-03-11 r4410 [x86_64-w64-mingw32-win7-sp1] (daily-20170311)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Comay BladeDrive E28 800GB
Serial Number: ADDC13RHM64MPDDT2Y
LU WWN Device Id: 5 000000 361c23f9f
Firmware Version: 2.71
User Capacity: 800 241 745 920 bytes [800 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Mar 24 23:34:33 2017
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0033 095 095 050 Pre-fail Always - 274400134
5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2608 (203 116 0)
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 43
13 Read_Soft_Error_Rate 0x0032 095 095 000 Old_age Always - 274400134
100 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 2877
170 Unknown_Attribute 0x0040 000 000 000 Old_age Offline - 68096
171 Unknown_Attribute 0x000a 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 36
177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 0
181 Program_Fail_Cnt_Total 0x000a 100 100 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x00b4 100 100 090 Old_age Offline - 0
187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 052 052 000 Old_age Always - 52 (Min/Max 37/52)
195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 274400134
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
198 Offline_Uncorrectable 0x0010 120 120 000 Old_age Offline - 3874060500992
199 UDMA_CRC_Error_Count 0x0090 200 200 000 Old_age Offline - 0
201 Unknown_SSD_Attribute 0x001c 120 120 000 Old_age Offline - 274400134
204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 274400134
230 Unknown_SSD_Attribute 0x0013 100 100 000 Pre-fail Always - 0
231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0
232 Available_Reservd_Space 0x0032 000 000 000 Old_age Always - 264
233 Media_Wearout_Indicator 0x0032 000 000 000 Old_age Always - 2536
234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 2824
235 Unknown_Attribute 0x0033 100 100 002 Pre-fail Always - 0
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 2824
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 3792
SMART Error Log not supported
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|||
Note:
See TracQuery
for help on using queries.
