Custom Query (1364 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:

Results (190 - 192 of 1364)

← 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 →
Ticket Resolution Summary Owner Reporter
#609 fixed Unknown USB bridge 0bf6 :1001 USB 3.0 dock HDMU3 by Addonics Technologies, Inc. Christian Franke dockdock
Description

Hello,

Could you please add support for this HDMU3 device USB bridge [0x0bf6:0x1001 (0x100)] ​http://www.addonics.com/datasheets/files/HDMU3.pdf 

# smartctl --all  /dev/sdf
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64]
Copyright (C) 2002-14, Bruce Allen, Christian Franke, 

/dev/sdf: Unknown USB bridge [0x0bf6:0x1001 (0x100)]

This seems an unsupported external usb 3.0 dock (for 3.5 and 2.5'' HD)
 0bf6:1001 USB 3.0 dock by Addonics Technologies, Inc. 

I am running it on a PC with USB 2.0 only capability

Sep 12 19:16:19 localhost kernel: [46598.700030] usb 3-1: new high-speed USB device number 18 using ehci-pci
Sep 12 19:16:20 localhost kernel: [46598.838669] usb 3-1: New USB device found, idVendor=0bf6, idProduct=1001
Sep 12 19:16:20 localhost kernel: [46598.838674] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 12 19:16:20 localhost kernel: [46598.838677] usb 3-1: Product: HDMU3
Sep 12 19:16:20 localhost kernel: [46598.838679] usb 3-1: Manufacturer: Addonics Technologies, Inc.
Sep 12 19:16:20 localhost kernel: [46598.838682] usb 3-1: SerialNumber: HDMU3000000015
Sep 12 19:16:20 localhost kernel: [46598.838962] usb-storage 3-1:1.0: USB Mass Storage device detected
Sep 12 19:16:20 localhost kernel: [46598.839072] scsi12 : usb-storage 3-1:1.0
Sep 12 19:16:20 localhost mtp-probe: checking bus 3, device 18: "/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-1"
Sep 12 19:16:20 localhost mtp-probe: bus: 3, device: 18 was not an MTP device

Thanks

lsusb -vv

Bus 003 Device 018: ID 0bf6:1001 Addonics Technologies, Inc. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x0bf6 Addonics Technologies, Inc.
  idProduct          0x1001 
  bcdDevice            1.00
  iManufacturer           1 Addonics Technologies, Inc.
  iProduct                2 HDMU3
  iSerial                 3 removed
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
#612 fixed WD My Passport drive returning "Invalid ATA output register values" Christian Franke Jeremy Chadwick
Description

I've begun to see the following error in smartctl, I believe since 6.4 (I can try 6.3 if you need me to) when doing smartctl -a /dev/sdc on my USB-attached WD My Passport drive: 

=== START OF READ SMART DATA SECTION ===
SMART Status command failed
Please get assistance from http://smartmontools.sourceforge.net/
Register values returned from SMART Status command are:
 ERR=0x00, SC=0x00, LL=0x00, LM=0x00, LH=0x00, DEV=0x00, STS=0x00
SMART Status not supported: Invalid ATA output register values
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

Not sure, but could this possibly be related to https://www.smartmontools.org/ticket/548 ?

I do find it interesting that ASC=0 but ASCQ=0x1D, though I have virtually no experience with SAT (which I believe this model of drive does require; I have to use -d sat if specifying the drive by mounted drive letter vs. /dev string).

Here's output from smartctl -r ioctl,2 -i -H /dev/sdc. If you need anything else, just lemme know. 

smartctl 6.4 2015-06-04 r4109 [i686-w64-mingw32-win7(64)-sp1] (sf-6.4-1)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

 \\.\PhysicalDrive2: successfully opened
  IOCTL_STORAGE_QUERY_PROPERTY returns:
    Vendor:   "WD      "
    Product:  "My Passport 0748"
    Revision: "1022"
    Removable: No
    BusType:   0x07
PhysicalDrive2, "WD My Passport 0748 USB Device":
 \\KOITSU\root\cimv2:Win32_USBController.DeviceID="PCI\\VEN_8086&DEV_1E26&SUBSYS_50061458&REV_04\\3&11583659&0&E8":
  |   "USB\\ROOT_HUB20\\4&232151F9&0"
  +-> "USB\\VID_8087&PID_0024\\5&69DDA25&0&1" [0x8087:0x0024]
 \\KOITSU\root\cimv2:Win32_USBController.DeviceID="PCI\\VEN_8086&DEV_1E2D&SUBSYS_50061458&REV_04\\3&11583659&0&D0":
  |   "USB\\ROOT_HUB20\\4&282DCF3F&0"
  +-> "USB\\VID_8087&PID_0024\\5&12B45E09&0&1" [0x8087:0x0024]
  +-> "USB\\VID_046D&PID_C049\\6&265D47D&0&3" [0x046d:0xc049]
  +-> "USB\\VID_046D&PID_C049&MI_00\\7&BEFB38&0&0000" [0x046d:0xc049]
  |   "HID\\VID_046D&PID_C049&MI_00\\8&2337004B&0&0000"
  +-> "USB\\VID_046D&PID_C049&MI_01\\7&BEFB38&0&0001" [0x046d:0xc049]
  |   "HID\\VID_046D&PID_C049&MI_01&COL01\\8&26A8ABA4&0&0000"
  |   "HID\\VID_046D&PID_C049&MI_01&COL02\\8&26A8ABA4&0&0001"
  +-> "USB\\VID_045E&PID_028E\\452D95E" [0x045e:0x028e]
  +-> "USB\\VID_045E&PID_028E&IG_00\\7&1797EB30&0&00" [0x045e:0x028e]
  |   "HID\\VID_045E&PID_028E&IG_00\\8&28008CCC&0&0000"
  +-> "USB\\VID_046D&PID_082C\\68E3BE60" [0x046d:0x082c]
  +-> "USB\\VID_046D&PID_082C&MI_00\\7&2DEEA658&0&0000" [0x046d:0x082c]
  +-> "USB\\VID_046D&PID_082C&MI_02\\7&2DEEA658&0&0002" [0x046d:0x082c]
  +-> "USB\\VID_045E&PID_00DB\\6&265D47D&0&4" [0x045e:0x00db]
  +-> "USB\\VID_045E&PID_00DB&MI_00\\7&28157AAF&0&0000" [0x045e:0x00db]
  |   "HID\\VID_045E&PID_00DB&MI_00\\8&3733C4FC&0&0000"
  +-> "USB\\VID_045E&PID_00DB&MI_01\\7&28157AAF&0&0001" [0x045e:0x00db]
  |   "HID\\VID_045E&PID_00DB&MI_01\\8&135C873A&0&0000"
 \\KOITSU\root\cimv2:Win32_USBController.DeviceID="PCI\\VEN_8086&DEV_1E31&SUBSYS_50071458&REV_04\\3&11583659&0&A0":
  |   "IUSB3\\ROOT_HUB30\\4&24618A5B&0"
  +-> "USB\\VID_1058&PID_0748\\575839314136333931383035" [0x1058:0x0748]
  +--> "USBSTOR\\DISK&VEN_WD&PROD_MY_PASSPORT_0748&REV_1022\\575839314136333931383035&0"
  +===> "WD My Passport 0748 USB Device" [0x1058:0x0748]
  +--> "USBSTOR\\OTHER&VEN_WD&PROD_SES_DEVICE&REV_1022\\575839314136333931383035&1"
  +---> ("WD SES Device")

REPORT-IOCTL: Device=/dev/sdc Command=IDENTIFY DEVICE
 Input:   FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN
 [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
  Incoming data, len=512, resid=0 [only first 256 bytes shown]:
 00     7a 42 ff 3f 37 c8 10 00  00 00 00 00 3f 00 00 00                        
 10     00 00 00 00 20 20 20 20  57 20 2d 44 58 57 31 39                        
 20     36 41 39 33 38 31 35 30  00 00 00 40 00 00 31 30                        
 30     30 2e 41 31 31 30 44 57  20 43 44 57 30 31 4d 4a                        
 40     57 56 31 2d 41 31 47 4a  30 53 20 20 20 20 20 20                        
 50     20 20 20 20 20 20 20 20  20 20 20 20 20 20 10 80                        
 60     00 40 00 2f 01 40 00 00  00 00 07 00 ff 3f 10 00                        
 70     3f 00 10 fc fb 00 00 01  ff ff ff 0f 00 00 07 01                        
 80     03 00 78 00 78 00 78 00  78 00 00 00 00 00 00 00                        
 90     00 00 00 00 00 00 1f 00  06 9f 04 00 4c 00 40 00                        
 a0     fe 03 00 00 6b 74 69 7d  23 61 69 74 49 bc 23 61                        
 b0     7f 00 69 00 69 00 80 00  fe ff 00 00 00 00 00 00                        
 c0     00 00 00 00 00 00 00 00  b0 6d 70 74 00 00 00 00                        
 d0     00 00 00 00 03 60 00 00  01 50 e2 4e d9 08 04 38                        
 e0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 18 40                        
 f0     18 40 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 [Duration: 0.014s]
REPORT-IOCTL: Device=/dev/sdc Command=IDENTIFY DEVICE returned 0

===== [IDENTIFY DEVICE] DATA START (BASE-16) =====
000-015: 7a 42 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |zB.?7.......?...|
016-031: 00 00 00 00 20 20 20 20 57 20 2d 44 58 57 31 39 |....    W -DXW19|
032-047: 36 41 39 33 38 31 35 30 00 00 00 40 00 00 31 30 |6A938150...@..10|
048-063: 30 2e 41 31 31 30 44 57 20 43 44 57 30 31 4d 4a |0.A110DW CDW01MJ|
064-079: 57 56 31 2d 41 31 47 4a 30 53 20 20 20 20 20 20 |WV1-A1GJ0S      |
080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 |              ..|
096-111: 00 40 00 2f 01 40 00 00 00 00 07 00 ff 3f 10 00 |.@./.@.......?..|
112-127: 3f 00 10 fc fb 00 00 01 ff ff ff 0f 00 00 07 01 |?...............|
128-143: 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 |..x.x.x.x.......|
144-159: 00 00 00 00 00 00 1f 00 06 9f 04 00 4c 00 40 00 |............L.@.|
160-175: fe 03 00 00 6b 74 69 7d 23 61 69 74 49 bc 23 61 |....kti}#aitI.#a|
176-191: 7f 00 69 00 69 00 80 00 fe ff 00 00 00 00 00 00 |..i.i...........|
192-207: 00 00 00 00 00 00 00 00 b0 6d 70 74 00 00 00 00 |.........mpt....|
208-223: 00 00 00 00 03 60 00 00 01 50 e2 4e d9 08 04 38 |.....`...P.N...8|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 18 40 |...............@|
240-255: 18 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..............|
256-271: 21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |!...............|
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 |................|
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 35 70 00 00 |............5p..|
416-431: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 |...@............|
432-447: 00 00 18 15 00 00 00 00 00 00 00 00 3e 10 00 00 |............>...|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 01 00 00 10 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 80 |................|
===== [IDENTIFY DEVICE] DATA END (512 Bytes) =====

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Elements / My Passport (USB, AF)
Device Model:     WDC WD10JMVW-11AJGS0
Serial Number:    WD-WX91A6391805
LU WWN Device Id: 5 0014ee 208d93804
Firmware Version: 01.01A01
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Sep 24 05:37:33 2015 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled


REPORT-IOCTL: Device=/dev/sdc Command=SMART READ ATTRIBUTE VALUES
 Input:   FR=0xd0, SC=0x01, LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
 [ata pass-through(16): 85 08 0e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00 ]
  Incoming data, len=512, resid=0 [only first 256 bytes shown]:
 00     10 00 01 2f 00 c8 c8 00  00 00 00 00 00 00 03 27                        
 10     00 ad ad 2e 09 00 00 00  00 00 04 32 00 64 64 25                        
 20     00 00 00 00 00 00 05 33  00 c8 c8 00 00 00 00 00                        
 30     00 00 07 2e 00 c8 c8 00  00 00 00 00 00 00 09 32                        
 40     00 64 64 56 00 00 00 00  00 00 0a 32 00 64 fd 00                        
 50     00 00 00 00 00 00 0b 32  00 64 fd 00 00 00 00 00                        
 60     00 00 0c 32 00 64 64 19  00 00 00 00 00 00 c0 32                        
 70     00 c8 c8 03 00 00 00 00  00 00 c1 32 00 c8 c8 89                        
 80     00 00 00 00 00 00 c2 22  00 69 67 2a 00 00 00 00                        
 90     00 00 c4 32 00 c8 c8 00  00 00 00 00 00 00 c5 32                        
 a0     00 c8 c8 00 00 00 00 00  00 00 c6 30 00 64 fd 00                        
 b0     00 00 00 00 00 00 c7 32  00 c8 c8 00 00 00 00 00                        
 c0     00 00 c8 08 00 64 fd 00  00 00 00 00 00 00 00 00                        
 d0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 e0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 f0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 [Duration: 0.135s]
REPORT-IOCTL: Device=/dev/sdc Command=SMART READ ATTRIBUTE VALUES returned 0

===== [SMART READ ATTRIBUTE VALUES] DATA START (BASE-16) =====
000-015: 10 00 01 2f 00 c8 c8 00 00 00 00 00 00 00 03 27 |.../...........'|
016-031: 00 ad ad 2e 09 00 00 00 00 00 04 32 00 64 64 25 |...........2.dd%|
032-047: 00 00 00 00 00 00 05 33 00 c8 c8 00 00 00 00 00 |.......3........|
048-063: 00 00 07 2e 00 c8 c8 00 00 00 00 00 00 00 09 32 |...............2|
064-079: 00 64 64 56 00 00 00 00 00 00 0a 32 00 64 fd 00 |.ddV.......2.d..|
080-095: 00 00 00 00 00 00 0b 32 00 64 fd 00 00 00 00 00 |.......2.d......|
096-111: 00 00 0c 32 00 64 64 19 00 00 00 00 00 00 c0 32 |...2.dd........2|
112-127: 00 c8 c8 03 00 00 00 00 00 00 c1 32 00 c8 c8 89 |...........2....|
128-143: 00 00 00 00 00 00 c2 22 00 69 67 2a 00 00 00 00 |.......".ig*....|
144-159: 00 00 c4 32 00 c8 c8 00 00 00 00 00 00 00 c5 32 |...2...........2|
160-175: 00 c8 c8 00 00 00 00 00 00 00 c6 30 00 64 fd 00 |...........0.d..|
176-191: 00 00 00 00 00 00 c7 32 00 c8 c8 00 00 00 00 00 |.......2........|
192-207: 00 00 c8 08 00 64 fd 00 00 00 00 00 00 00 00 00 |.....d..........|
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 f1 e0 4c 01 7b |.............L.{|
368-383: 03 00 01 00 02 dc 05 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
===== [SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes) =====


REPORT-IOCTL: Device=/dev/sdc Command=SMART READ ATTRIBUTE THRESHOLDS
 Input:   FR=0xd1, SC=0x01, LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
 [ata pass-through(16): 85 08 0e 00 d1 00 01 00 01 00 4f 00 c2 00 b0 00 ]
  Incoming data, len=512, resid=0 [only first 256 bytes shown]:
 00     10 00 01 33 c8 c8 c8 c8  00 00 00 00 00 00 03 15                        
 10     00 00 00 00 00 00 00 00  00 00 04 00 00 00 00 00                        
 20     00 00 00 00 00 00 05 8c  00 00 00 00 00 00 00 00                        
 30     00 00 07 00 c8 c8 c8 c8  00 00 00 00 00 00 09 00                        
 40     00 00 00 00 00 00 00 00  00 00 0a 00 00 00 00 00                        
 50     00 00 00 00 00 00 0b 00  00 00 00 00 00 00 00 00                        
 60     00 00 0c 00 00 00 00 00  00 00 00 00 00 00 c0 00                        
 70     00 00 00 00 00 00 00 00  00 00 c1 00 00 00 00 00                        
 80     00 00 00 00 00 00 c2 00  00 00 00 00 00 00 00 00                        
 90     00 00 c4 00 00 00 00 00  00 00 00 00 00 00 c5 00                        
 a0     00 00 00 00 00 00 00 00  00 00 c6 00 00 00 00 00                        
 b0     00 00 00 00 00 00 c7 00  00 00 00 00 00 00 00 00                        
 c0     00 00 c8 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 d0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 e0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 f0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 [Duration: 0.007s]
REPORT-IOCTL: Device=/dev/sdc Command=SMART READ ATTRIBUTE THRESHOLDS returned 0

===== [SMART READ ATTRIBUTE THRESHOLDS] DATA START (BASE-16) =====
000-015: 10 00 01 33 c8 c8 c8 c8 00 00 00 00 00 00 03 15 |...3............|
016-031: 00 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00 |................|
032-047: 00 00 00 00 00 00 05 8c 00 00 00 00 00 00 00 00 |................|
048-063: 00 00 07 00 c8 c8 c8 c8 00 00 00 00 00 00 09 00 |................|
064-079: 00 00 00 00 00 00 00 00 00 00 0a 00 00 00 00 00 |................|
080-095: 00 00 00 00 00 00 0b 00 00 00 00 00 00 00 00 00 |................|
096-111: 00 00 0c 00 00 00 00 00 00 00 00 00 00 00 c0 00 |................|
112-127: 00 00 00 00 00 00 00 00 00 00 c1 00 00 00 00 00 |................|
128-143: 00 00 00 00 00 00 c2 00 00 00 00 00 00 00 00 00 |................|
144-159: 00 00 c4 00 00 00 00 00 00 00 00 00 00 00 c5 00 |................|
160-175: 00 00 00 00 00 00 00 00 00 00 c6 00 00 00 00 00 |................|
176-191: 00 00 00 00 00 00 c7 00 00 00 00 00 00 00 00 00 |................|
192-207: 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7d |...............}|
===== [SMART READ ATTRIBUTE THRESHOLDS] DATA END (512 Bytes) =====

=== START OF READ SMART DATA SECTION ===

REPORT-IOCTL: Device=/dev/sdc Command=SMART STATUS CHECK
 Input:   FR=0xda, SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0
 [ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
  >>> Sense buffer, len=18:
 00     70 00 01 00 00 00 00 0a  00 00 00 00 00 1d 00 00                        
 10     00 00                                                                   
  status=2: sense_key=1 asc=0 ascq=1d
 [Duration: 0.141s]
 Output: ERR=0x00, SC=0x00, LL=0x00, LM=0x00, LH=0x00, DEV=0x00, STS=0x00
SMART Status command failed
Please get assistance from http://smartmontools.sourceforge.net/
Register values returned from SMART Status command are:
 ERR=0x00, SC=0x00, LL=0x00, LM=0x00, LH=0x00, DEV=0x00, STS=0x00
REPORT-IOCTL: Device=/dev/sdc Command=SMART STATUS CHECK returned -1 errno=40 [Invalid ATA output register values]
SMART Status not supported: Invalid ATA output register values
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
#621 fixed The incorrect smartctl terminal printout for GLTSD bit Christian Franke bear
Description

T10's SPC-4 specifies the GLTSD bit in section 7.5.10 Control mode page as:

--- A global logging target save disable (GLTSD) bit set to zero specifies that the logical unit implicitly saves, at vendor specific intervals, each log parameter in which the TSD bit (see 7.3) is set to zero. A GLTSD bit set to one specifies that the logical unit shall not implicitly save any log parameters. ---

I have verified the functionality of the smartctl -S [on/off] /dev/sgX command on a SAS drive and believe the output is incorrect.

When you use -S on, you are enabling Autosaving of logs (set GLTSD bit to 0) but the printout says you are setting the GLTSD bit. This printout is incorrect. When you use -S off you are disabling Autosaving of logs (set GLTSD bit to 1) but the printout says you are clearing the GLTSD bit. This printout is incorrect.

(See attached picture)

On the bright side, I have verified that the command does correct set/clear the bit in the Control mode page 0Ah .

← 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 →
Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.