Custom Query (1546 matches)
Results (157 - 159 of 1546)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #334 | fixed | Add support for Sandisk Extreme II SSD drives | ||
| Description |
The drives are not recognized, and SMART attributes aren't presented correctly. I am providing the current smartctl output as well as Sandisk's proprietary utility output showing the meaning of the attributes: # smartctl -x /dev/sdc smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-63-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: SanDisk SDSSDXP480G
Serial Number: 134322400436
LU WWN Device Id: 5 001b44 a51d228b4
Firmware Version: R1311
User Capacity: 480,103,981,056 bytes [480 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Wed Jun 4 10:46:20 2014 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SMART Attributes Data Structure revision number: 4
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0
9 Power_On_Hours -O--CK 253 100 --- - 3582
12 Power_Cycle_Count -O--CK 100 100 --- - 12
166 Unknown_Attribute -O--CK 100 100 --- - 1
167 Unknown_Attribute -O--CK 100 100 --- - 41
168 Unknown_Attribute -O--CK 100 100 --- - 81
169 Unknown_Attribute -O--CK 100 100 --- - 756
171 Unknown_Attribute -O--CK 100 100 --- - 0
172 Unknown_Attribute -O--CK 100 100 --- - 0
173 Unknown_Attribute -O--CK 100 100 --- - 10
174 Unknown_Attribute -O--CK 100 100 --- - 2
187 Reported_Uncorrect -O--CK 100 100 --- - 0
194 Temperature_Celsius -O---K 067 038 --- - 33 (Min/Max 24/38)
212 Unknown_Attribute -O--CK 100 100 --- - 0
230 Head_Amplitude -O--CK 100 100 --- - 33
232 Available_Reservd_Space PO--CK 100 100 004 - 100
233 Media_Wearout_Indicator -O--CK 100 100 --- - 5385
241 Total_LBAs_Written ----CK 253 253 --- - 2433
242 Total_LBAs_Read ----CK 253 253 --- - 3335
243 Unknown_Attribute -O--CK 100 100 --- - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 2 sectors [Comprehensive SMART error log]
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log]
GP/S Log at address 0x04 has 8 sectors [Device Statistics]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
GP Log at address 0x07 has 1 sectors [Extended self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error]
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP/S Log at address 0x30 has 9 sectors [Reserved]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
Warning: device does not support SCT Commands
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x000a 4 142 Device-to-host register FISes sent due to a COMRESET
From Sandisk utility:
Sandisk Extreme II (firmware: R1311) 5 / 05 - Retired Block Count [1 block = 4 MB] 9 / 09 - Power On Hours 12 / 0C - Device Power Cycle Count 166 / A6 - Min W/E Cycle 167 / A7 - Min Bad Block/Die 168 / A8 - Maximum Erase Cycle 169 / A9 - Total Bad Block 171 / AB - Program Fail Count 172 / AC - Erase Fail Count 173 / AD - Average Erase Cycle 174 / AE - Unexpected Power Loss Count 187 / BB - Reported Uncorrectable Errors 194 / C2 - Current Temperature 212 / D4 - SATA PHY Error 230 / E6 - Percentage Total P/E Count XX.YY 232 / E8 - Spare Blocks Remaining [%] 233 / E9 - Total GB Written to NAND 241 / F1 - Total GB Written 242 / F2 - Total GB Read |
|||
| #336 | fixed | Different check intervals for different devices | ||
| Description |
I have a device that doesn't support to check the power state. Thus the -n option doesn't work for this one. I wanted to configure a longer check interval only for this device. As I understand this is not possible in the smartd.conf. With your help I managed to configure the check interval for the service and thus for all devices. But I'd like to leave the check interval for the other devices. I'd be grateful if you add this feature to smartmontools. Thank you very much. |
|||
| #337 | fixed | Add support for SanDisk SSD U100 series | ||
| Description |
The device isn't recognized and some impotent attributes are unknown or has wrong name. smartctl -q noserial -x /dev/sda :smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-30-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SanDisk SSD U100 8GB
Firmware Version: 10.56.00
User Capacity: 8,012,390,400 bytes [8,01 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Jul 1 12:31:52 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct -O---- 100 100 000 - 0
9 Power_On_Hours -O---- 100 100 000 - 329
12 Power_Cycle_Count -O---- 100 100 000 - 31
171 Unknown_Attribute -O---- 100 100 000 - 0
172 Unknown_Attribute -O---- 100 100 000 - 0
173 Unknown_Attribute -O---- 100 100 000 - 0
174 Unknown_Attribute -O---- 100 100 000 - 21
187 Reported_Uncorrect -O---- 100 100 000 - 0
230 Unknown_SSD_Attribute -O---- 100 100 000 - 0
232 Available_Reservd_Space PO---- 100 100 005 - 0
234 Unknown_Attribute -O---- 100 100 000 - 3
241 Total_LBAs_Written -O---- 100 100 000 - 8955010
242 Total_LBAs_Read -O---- 100 100 000 - 8066998
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x03 GPL,SL R/O 16 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 GPL,SL R/O 1 SMART self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
0xa2 GPL,SL VS 2 Device vendor specific log
0xa3 GPL,SL VS 1 Device vendor specific log
Warning! SMART Extended Comprehensive Error Log Structure (16/16) error: invalid SMART checksum.
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
No Errors Logged
SMART Extended Self-test Log (GP Log 0x07) not supported
Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 10% 307 -
# 2 Short offline Aborted by host 80% 307 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Description
5 ===== = = == Temperature Statistics (rev 1) ==
5 0x008 1 31 Current Temperature
5 0x010 1 30 Average Short Term Temperature
5 0x018 1 - Average Long Term Temperature
5 0x020 1 37 Highest Temperature
5 0x028 1 26 Lowest Temperature
5 0x030 1 34 Highest Average Short Term Temperature
5 0x038 1 34 Lowest Average Short Term Temperature
5 0x040 1 - Highest Average Long Term Temperature
5 0x048 1 - Lowest Average Long Term Temperature
5 0x050 4 0 Time in Over-Temperature
5 0x058 1 95 Specified Maximum Operating Temperature
5 0x060 4 0 Time in Under-Temperature
5 0x068 1 0 Specified Minimum Operating Temperature
7 ===== = = == Solid State Device Statistics (rev 1) ==
7 0x008 1 0~ Percentage Used Endurance Indicator
|_ ~ normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0001 2 0 Command failed due to ICRC error
Meaning of attributes grabbed from original SanDisk tools for windows<SmartDataDefinition Name="SanDisk P-Series" Priority="1102" Inherits="SuppressAll" DefaultDataFormat="Worst[1],Raw[4]"> <DeviceClassificationRule> <Model Regex="SanDisk SDSSD[PR].*" CaseSensitive="false"/> <Serial Regex=".*" CaseSensitive="false"/> <Firmware Regex=".*" CaseSensitive="false"/> </DeviceClassificationRule> <!-- P series --> <DeviceClassificationRule> <Model Regex="SanDisk SSD U100 .*" CaseSensitive="false"/> <Serial Regex=".*" CaseSensitive="false"/> <Firmware Regex=".*" CaseSensitive="false"/> </DeviceClassificationRule> <Attribute ID="5" Name="ReallocatedSectorCount" Display="true"/> <Attribute ID="9" Name="PowerOnHours" Display="true"/> <Attribute ID="12" Name="PowerCycleCount" Display="true"/> <Attribute ID="171" Name="ProgramFailCount" Display="true"/> <Attribute ID="172" Name="EraseFailCount" Display="true"/> <Attribute ID="173" Name="AverageWriteEraseCount" Display="true"/> <Attribute ID="174" Name="UnexpectedPowerLossCount" Display="true"/> <Attribute ID="187" Name="ReportedUncorrectableErrors" Display="true"/> <Attribute ID="230" DataFormat="Worst[1],Raw[4]" Name="PercentWriteEraseCount" Display="true"/> <Attribute ID="232" DataFormat="" Name="PercentageReserveSpaceAvailable" Display="true"/> <Attribute ID="234" DataFormat="Worst[1],Raw[4]" Name="PercentWriteEraseCountBC" Display="true"/> <Attribute ID="241" DataFormat="Worst[1],Raw[7]" Name="LBASectorsWritten" Display="true"/> <Attribute ID="242" DataFormat="Worst[1],Raw[7]" Name="LBASectorsRead" Display="true"/> </SmartDataDefinition> Created by my drverdb record for test purpose {
"SanDisk SSD U100 Series",
"SanDisk SSD U100 .*",
"", "",
"-v 5,raw48,Reallocated_Sector_Ct "
"-v 9,raw48,Power_On_Hours "
"-v 12,raw48,Power_Cycle_Count "
"-v 171,raw48,Program_Fail_Count "
"-v 172,raw48,Erase_Fail_Count "
"-v 173,raw48,Avg_Write_Erase_Ct "
"-v 174,raw48,Unexpect_Power_Loss_Ct "
"-v 187,raw48,Reported_Uncorrect "
"-v 230,raw48,Perc_Write_Erase_Count "
"-v 232,raw48,Perc_Reserve_Space_Avai "
"-v 234,raw48,Perc_Write_Erase_Ct_BC "
"-v 241,raw48,LBA_Sectors_Written "
"-v 242,raw48,LBA_Sectors_Read "
}
smartctl -q noserial -A /dev/sda after modify drivedb by handsmartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-30-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 329 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 31 171 Program_Fail_Count 0x0002 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0002 100 100 000 Old_age Always - 0 173 Avg_Write_Erase_Ct 0x0002 100 100 000 Old_age Always - 0 174 Unexpect_Power_Loss_Ct 0x0002 100 100 000 Old_age Always - 21 187 Reported_Uncorrect 0x0002 100 100 000 Old_age Always - 0 230 Perc_Write_Erase_Count 0x0002 100 100 000 Old_age Always - 0 232 Perc_Reserve_Space_Avai 0x0003 100 100 005 Pre-fail Always - 0 234 Perc_Write_Erase_Ct_BC 0x0002 100 100 000 Old_age Always - 3 241 LBA_Sectors_Written 0x0002 100 100 000 Old_age Always - 8956330 242 LBA_Sectors_Read 0x0002 100 100 000 Old_age Always - 8066998 |
|||
Note:
See TracQuery
for help on using queries.
